I need these for my coilovers bad! lol rear I'm in for sure, been trying to find these. Chris Kozak hockeynut9@outlook.com qty. 1
MD can the rear solid mounts for coils still be purchased from Richard?
Yes, but he is very hard to get a hold of.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
MD thanks for the reply and i was able to get ahold of him the other day and he had some in stock.
I'd like to get a rear set for stock/lowering springs. Been looking for a set for some time now. Awesome to know someone is making them again.
Rear Set: Stock / Lowering springs. - 4.25\" Stock Diameter spring- Stock Strut shaft diameter. - Koni Yellows would require the bushing drilled for the larger diameter shafts. 1/4\" additional drop- $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - Installed!
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5.Cody Nobbs - fbodyfreakls1@gmail.com - Sleepin....zzzzz - 1 - paypal
6.Aaron Garcia - amgarcia2008@gmail.com - Aaron Garcia - 1- Paypal
7. Derek Fulk - drokkr01@gmail.com - drokkr- Qty 1 - Paypal
8.Brian Lorello- lorello@cebridge.net- sppok427- qty 1- paypal
9. Robert Dugre - robertd@sapphire-design.com - qty 1 - paypal
10. Travis Kawalec - kawalec02@yahoo.com - Qty. 1 - paypal
Rear Set: Coil over springs. Designed for 2.5\" Coil-Overs - Specifically BC Coilovers - 1/4\" additional drop - $75.00-95.00
1. James MacKenzie - macktruck(dot)mackenzie(at)gmail(dot)com - macktruck84 - Qty: 1 set - Paypal
2. Evan Maddox - TheDizasterChild@gmail.com - Evan Undead - Qty: 1 set - PayPal
3.Phil Duerr - cavfiredesire@hotmail.com - Philly D - Qty: 1set - Paypal
4.Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
5.
6.
7.
8.
9.
10.
Front set: Stock 4.875\" diameter springs & Stock Diameter shaft - - Unknown drop at this time - $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3. Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5. Cody Nobbs - fbodyfreakls1@gmail.com - Sleepin....zzzzz - 1 - paypal
6. Derek Fulk - drokkr01@gmail.com - drokkr- Qty 1 - Paypal
7.Brian Lorello- lorello@cebridge.net- sppok427- qty 1- paypal
8. Robert Dugre - robertd@sapphire-design.com - qty 1 - paypal
9.
10.
Front Set: Coil over springs. Designed for 2.5\" Coil-Overs - Unknown drop at this time - $75.00-100.00
1. Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
2.
3.
4.
5.
6.
7.
8.
9.
10.
I took my name off the list for a set of rears. I upgraded to coilovers and picked up a set directly from Richard.
Rear Set: Stock / Lowering springs. - 4.25\" Stock Diameter spring- Stock Strut shaft diameter. - Koni Yellows would require the bushing drilled for the larger diameter shafts. 1/4\" additional drop- $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - Installed!
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5.Cody Nobbs - fbodyfreakls1@gmail.com - Sleepin....zzzzz - 1 - paypal
6. Derek Fulk - drokkr01@gmail.com - drokkr- Qty 1 - Paypal
7.Brian Lorello- lorello@cebridge.net- sppok427- qty 1- paypal
8. Robert Dugre - robertd@sapphire-design.com - qty 1 - paypal
9. Travis Kawalec - kawalec02@yahoo.com - Qty. 1 - paypal
10.
Rear Set: Coil over springs. Designed for 2.5\" Coil-Overs - Specifically BC Coilovers - 1/4\" additional drop - $75.00-95.00
1. James MacKenzie - macktruck(dot)mackenzie(at)gmail(dot)com - macktruck84 - Qty: 1 set - Paypal
2. Evan Maddox - TheDizasterChild@gmail.com - Evan Undead - Qty: 1 set - PayPal
3.Phil Duerr - cavfiredesire@hotmail.com - Philly D - Qty: 1set - Paypal
4.Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
5.
6.
7.
8.
9.
10.
Front set: Stock 4.875\" diameter springs & Stock Diameter shaft - - Unknown drop at this time - $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3. Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5. Cody Nobbs - fbodyfreakls1@gmail.com - Sleepin....zzzzz - 1 - paypal
6. Derek Fulk - drokkr01@gmail.com - drokkr- Qty 1 - Paypal
7.Brian Lorello- lorello@cebridge.net- sppok427- qty 1- paypal
8. Robert Dugre - robertd@sapphire-design.com - qty 1 - paypal
9.
10.
Front Set: Coil over springs. Designed for 2.5\" Coil-Overs - Unknown drop at this time - $75.00-100.00
1. Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
2.
3.
4.
5.
6.
7.
8.
9.
10.
I gotta get the rear mounts for my BC extreme low set up as well
are these being made??? or have in stock?? what do the front ones look like for 2.5 coil overs???? and the rears are posted I believe! do I have to wait till it hits 10 sets or can I order??
Any 2.5" rear coil over set can be ordered direct from Richard. BC's for example.
Richard's contact info is in the first post....
We never had any fronts, this was only for rears.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
-MD- Enforcer wrote:Any 2.5" rear coil over set can be ordered direct from Richard. BC's for example.
Richard's contact info is in the first post....
We never had any fronts, this was only for rears.
OK great thanks so much for the info . Ya I have a pair of ground control upper solid camber plates I had from my sho . I can get an adapter plate made to bolt inside my strut tower . Or get ones copied to fit . I like being able to get the alignment perfect . Plus having them solid .
I will contact Richard. Those rear mounts are exactly in my mind what I wanted to make .I like how he gained more travel for the shock itself... probably stops all cases of it bottoming put when car is lowered .