(Feeler) Power Brake Master Delete adapter / Wilwood manual (7/8") tandem Mater Cylinder - Page 2 - Suspension and Brake Forum
Forum Post / Reply
You must log in before you can post or reply to messages.
Got the final confirmed price. We are a go at $67.50 for 10 sold. Plus shipping to your location. $8.55 for USPS flat rate, insured, shipping in the US of A. $20.55 for USPS flat rat international shipping to anywhere in the world.
I'll wait until Friday. Then Friday I'll start sending out the paypal invoices to the email address listed. Once we have enough people should be 2-3 weeks to get the parts from the machine shop.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
james walt wrote:whats the point in this?
^ this
To remove your stock power master cylinder and replace it with a lighter, smaller, brake feel, and more powerful wilwood manual master.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
need pics of what needs to be done!
Change my email from gmail to msn for my paypal.
1. Mike Iwan - mike.iwan89 at gmail dot com - ekimnawi89 - Qty 1 - PayPal
2. Nicholas Crosby - nacrosby at hotmail dot com - Nic Crosby - Qty 1 - PayPal
3. Spencer Matter - strat81 at msn dot com - strat81 - Qty 1 - PayPal
4. D Minardo - DMinardo985 at hotmail dot com - Sparkey05 - Qty 1 - PayPal
5. Wayde Knapp - wayde000 at hotmail dot com - wayde000 - Qty 1 - PayPal
6. Andrew Samson - badbowtie950 at gmail dot com - Ecoswapped- Qty 1 - PayPal
7. Jason Miller - jasonmiller150@gmail.com - Qty 1 - 2NVUS4U - PayPal
8.
9.
10. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Ah screw it...dont even know if I want it but im in..
1. Mike Iwan - mike.iwan89 at gmail dot com - ekimnawi89 - Qty 1 - PayPal
2. Nicholas Crosby - nacrosby at hotmail dot com - Nic Crosby - Qty 1 - PayPal
3. Spencer Matter - strat81 at msn dot com - strat81 - Qty 1 - PayPal
4. D Minardo - DMinardo985 at hotmail dot com - Sparkey05 - Qty 1 - PayPal
5. Wayde Knapp - wayde000 at hotmail dot com - wayde000 - Qty 1 - PayPal
6. Andrew Samson - badbowtie950 at gmail dot com - Ecoswapped- Qty 1 - PayPal
7. Jason Miller - jasonmiller150@gmail.com - Qty 1 - 2NVUS4U - PayPal
8.Phillip Duerr - cavfiredesire@hotmail.com - Qty 1 - Philly D - Paypal
9.
10. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
Invoices will start to be emailed out. Hopefully later today. My buddy got married over the weekend, and it was a hell of a wedding.
Please take not that the price is discounted below on your invoice.
1. Mike Iwan - mike.iwan89 at gmail dot com - ekimnawi89 - Qty 1 - PayPal -Invoiced
2. Nicholas Crosby - nacrosby at hotmail dot com - Nic Crosby - Qty 1 - PayPal -Invoiced
3. Spencer Matter - strat81 at msn dot com - strat81 - Qty 1 - PayPal -Invoiced
4. D Minardo - DMinardo985 at hotmail dot com - Sparkey05 - Qty 1 - PayPal -Invoiced
5. Wayde Knapp - wayde000 at hotmail dot com - wayde000 - Qty 1 - PayPal -Invoiced
6. Andrew Samson - badbowtie950 at gmail dot com - Ecoswapped- Qty 1 - PayPal -Invoiced
7. Jason Miller - jasonmiller150@gmail.com - Qty 1 - 2NVUS4U - PayPal -Invoiced
8.Phillip Duerr - cavfiredesire@hotmail.com - Qty 1 - Philly D - Paypal -Invoiced
9.
10. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal -Invoiced
Edited 1 time(s). Last edited Monday, September 29, 2014 4:25 PM
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Hey Mike..
Dont want to be "that guy" but can you resend my invoice with canadian shipping? Many thanks...
Phil
Paid
Transaction ID 14287567MH6775432
1. Mike Iwan - mike.iwan89 at gmail dot com - ekimnawi89 - Qty 1 - PayPal -Invoiced
2. Nicholas Crosby - nacrosby at hotmail dot com - Nic Crosby - Qty 1 - PayPal -Invoiced
3. Spencer Matter - strat81 at msn dot com - strat81 - Qty 1 - Paid
4. D Minardo - DMinardo985 at hotmail dot com - Sparkey05 - Qty 1 - Paid
5. Wayde Knapp - wayde000 at hotmail dot com - wayde000 - Qty 1 - PayPal -Invoiced
6. Andrew Samson - badbowtie950 at gmail dot com - Ecoswapped- Qty 1 - PayPal -Invoiced
7. Jason Miller - jasonmiller150@gmail.com - Qty 1 - 2NVUS4U - PayPal -Invoiced
8.Phillip Duerr - cavfiredesire@hotmail.com - Qty 1 - Philly D - Paid
9.
10. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - Paid
Edited 1 time(s). Last edited Tuesday, September 30, 2014 6:44 AM
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Machine shop said these should be done 10/17/14. Keyword "should".
I ordered 10 pieces.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Here is an old post that still has some active pictures on how a few people modified everything for manual brakes.
Click ME!
Some more info.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Do you think you can send the invoice to me again, I haven't seen it yet.
Nic Crosby wrote:Do you think you can send the invoice to me again, I haven't seen it yet.
I just resent it.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
If I'm reading correctly, we should be able to ditch any factory distribution block, run t fittings connected to the appropriate lines, and just use the factory brake lines?
Well with the addition of a proportioning valve for the rear lines... Since it seems that the distro block has built in proportioning?
Paid
1. Mike Iwan - mike.iwan89 at gmail dot com - ekimnawi89 - Qty 1 - PayPal -Invoiced
2. Nicholas Crosby - nacrosby at hotmail dot com - Nic Crosby - Qty 1 - Paid
3. Spencer Matter - strat81 at msn dot com - strat81 - Qty 1 - Paid
4. D Minardo - DMinardo985 at hotmail dot com - Sparkey05 - Qty 1 - Paid
5. Wayde Knapp - wayde000 at hotmail dot com - wayde000 - Qty 1 - PayPal -Invoiced
6. Andrew Samson - badbowtie950 at gmail dot com - Ecoswapped- Qty 1 - PayPal -Invoiced
7. Jason Miller - jasonmiller150@gmail.com - Qty 1 - 2NVUS4U - PayPal -Invoiced
8.Phillip Duerr - cavfiredesire@hotmail.com - Qty 1 - Philly D - Paid
9.
10. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - Paid
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Paid.
This will free up quite a bit of space in the bay.
USACi =>146.9db
14.88 @ 90.73MPH =>GM Charger, Motor Mounts, Catback exhaust
1. Mike Iwan - mike.iwan89 at gmail dot com - ekimnawi89 - Qty 1 - PayPal -Invoiced
2. Nicholas Crosby - nacrosby at hotmail dot com - Nic Crosby - Qty 1 - Paid
3. Spencer Matter - strat81 at msn dot com - strat81 - Qty 1 - Paid
4. D Minardo - DMinardo985 at hotmail dot com - Sparkey05 - Qty 1 - Paid
5. Wayde Knapp - wayde000 at hotmail dot com - wayde000 - Qty 1 - PayPal -Invoiced
6. Andrew Samson - badbowtie950 at gmail dot com - Ecoswapped- Qty 1 - PayPal -Invoiced
7. Jason Miller - jasonmiller150@gmail.com - Qty 1 - 2NVUS4U - Paid
8. Phillip Duerr - cavfiredesire@hotmail.com - Qty 1 - Philly D - Paid
9.
10. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - Paid
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Paid as well. If anyone needs a MC I may have for sale. I'll update this in a couple days.
1. Mike Iwan - mike.iwan89 at gmail dot com - ekimnawi89 - Qty 1 - Paid
2. Nicholas Crosby - nacrosby at hotmail dot com - Nic Crosby - Qty 1 - Paid
3. Spencer Matter - strat81 at msn dot com - strat81 - Qty 1 - Paid
4. D Minardo - DMinardo985 at hotmail dot com - Sparkey05 - Qty 1 - Paid
5. Wayde Knapp - wayde000 at hotmail dot com - wayde000 - Qty 1 - PayPal -Invoiced
6. Andrew Samson - badbowtie950 at gmail dot com - Ecoswapped- Qty 1 - Paid
7. Jason Miller - jasonmiller150@gmail.com - Qty 1 - 2NVUS4U - Paid
8. Phillip Duerr - cavfiredesire@hotmail.com - Qty 1 - Philly D - Paid
9.
10. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - Paid
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Forum Post / Reply
You must log in before you can post or reply to messages.