(Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05' - Page 4 - Suspension and Brake Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Thursday, November 20, 2014 12:09 PM
Could I convince you to toss one of those tow straps in the same box and the mounts?

Might save me a bit on the shipping.


I miss my Cavalier, even if it made 100 hp on a cold day and had more suspension then it deserved.

Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Thursday, November 20, 2014 2:04 PM
Found some coilovers that I am purchasing. Will me jumping ship screw anything up?

Rear Set: Stock / Lowering springs. - 4.25\" Stock Diameter spring- Stock Strut shaft diameter. - Koni Yellows would require the bushing drilled for the larger diameter shafts. 1/4\" additional drop- $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5.Cody Nobbs - fbodyfreakls1@gmail.com - Sleepin....zzzzz - 1 - paypal
6.Aaron Garcia - amgarcia2008@gmail.com - Aaron Garcia - 1- Paypal
7. Lukas Jansons - LukasJansons@hotmail.com - Blue2000cavalier - Qty 1 - Paypal
8.
9.
10.

Rear Set: Coil over springs. Designed for 2.5\" Coil-Overs - Specifically BC Coilovers - 1/4\" additional drop - $75.00-95.00
1. James MacKenzie - macktruck(dot)mackenzie(at)gmail(dot)com - macktruck84 - Qty: 1 set - Paypal
2. Evan Maddox - TheDizasterChild@gmail.com - Evan Undead - Qty: 1 set - PayPal
3.Phil Duerr - cavfiredesire@hotmail.com - Philly D - Qty: 1set - Paypal
4.Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
5.
6.
7.
8.
9.
10.

Front set: Stock 4.875\" diameter springs & Stock Diameter shaft - - Unknown drop at this time - $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3. Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5. Cody Nobbs - fbodyfreakls1@gmail.com - Sleepin....zzzzz - 1 - paypal
6.
7.
8.
9.
10.

Front Set: Coil over springs. Designed for 2.5\" Coil-Overs - Unknown drop at this time - $75.00-100.00
1. Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
2.
3.
4.
5.
6.
7.
8.
9.
10.


You drive a cavalier? Why yes... yes I do.



Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Friday, November 21, 2014 5:06 AM
Blue2000cavalier wrote:Could I convince you to toss one of those tow straps in the same box and the mounts?
Might save me a bit on the shipping.

That is fine by me.

Tyler Ewy wrote:Found some coilovers that I am purchasing. Will me jumping ship screw anything up?

That is fine, you have to contact Richard Directly though. He is handling the coil-over parts.

I recommend calling him and setting everything up.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Friday, November 21, 2014 7:42 AM
-MD- Enforcer wrote:
Blue2000cavalier wrote:Could I convince you to toss one of those tow straps in the same box and the mounts?
Might save me a bit on the shipping.

That is fine by me.


Black with black Stitching please. I'd take the blue stitching if no black on black ones are about either would fit my color scheme. 10 inch length.



Edited 1 time(s). Last edited Friday, November 21, 2014 9:20 AM

I miss my Cavalier, even if it made 100 hp on a cold day and had more suspension then it deserved.
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Friday, November 21, 2014 3:36 PM
It looks like I can still jump in on this, so throwing myself on here.

Rear Set: Stock / Lowering springs. - 4.25\" Stock Diameter spring- Stock Strut shaft diameter. - Koni Yellows would require the bushing drilled for the larger diameter shafts. 1/4\" additional drop- $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5.Cody Nobbs - fbodyfreakls1@gmail.com - Sleepin....zzzzz - 1 - paypal
6.Aaron Garcia - amgarcia2008@gmail.com - Aaron Garcia - 1- Paypal
7. Lukas Jansons - LukasJansons@hotmail.com - Blue2000cavalier - Qty 1 - Paypal
8. Derek Fulk - drokkr01@gmail.com - drokkr- Qty 1 - Paypal
9.
10.

Rear Set: Coil over springs. Designed for 2.5\" Coil-Overs - Specifically BC Coilovers - 1/4\" additional drop - $75.00-95.00
1. James MacKenzie - macktruck(dot)mackenzie(at)gmail(dot)com - macktruck84 - Qty: 1 set - Paypal
2. Evan Maddox - TheDizasterChild@gmail.com - Evan Undead - Qty: 1 set - PayPal
3.Phil Duerr - cavfiredesire@hotmail.com - Philly D - Qty: 1set - Paypal
4.Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
5.
6.
7.
8.
9.
10.

Front set: Stock 4.875\" diameter springs & Stock Diameter shaft - - Unknown drop at this time - $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3. Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5. Cody Nobbs - fbodyfreakls1@gmail.com - Sleepin....zzzzz - 1 - paypal
6. Derek Fulk - drokkr01@gmail.com - drokkr- Qty 1 - Paypal
7.
8.
9.
10.

Front Set: Coil over springs. Designed for 2.5\" Coil-Overs - Unknown drop at this time - $75.00-100.00
1. Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
2.
3.
4.
5.
6.
7.
8.
9.
10.
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Monday, November 24, 2014 5:42 AM
Please contact Richard Directly for all coil over inquires.

Just call Richard Arraut. (616) 893-1433
Tell him you need 2.5\" coil rear solid mounts for your J-body.

I should be emailing out invoices for the Stock diameter rears later this week.


Rear Set: Stock / Lowering springs. - 4.25\" Stock Diameter spring- Stock Strut shaft diameter. - Koni Yellows would require the bushing drilled for the larger diameter shafts. 1/4\" additional drop- $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - Installed!
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5.Cody Nobbs - fbodyfreakls1@gmail.com - Sleepin....zzzzz - 1 - paypal
6.Aaron Garcia - amgarcia2008@gmail.com - Aaron Garcia - 1- Paypal
7. Lukas Jansons - LukasJansons@hotmail.com - Blue2000cavalier - Qty 1 - Paypal
8. Derek Fulk - drokkr01@gmail.com - drokkr- Qty 1 - Paypal
9.
10.

Rear Set: Coil over springs. Designed for 2.5\" Coil-Overs - Specifically BC Coilovers - 1/4\" additional drop - $75.00-95.00
1. James MacKenzie - macktruck(dot)mackenzie(at)gmail(dot)com - macktruck84 - Qty: 1 set - Paypal
2. Evan Maddox - TheDizasterChild@gmail.com - Evan Undead - Qty: 1 set - PayPal
3.Phil Duerr - cavfiredesire@hotmail.com - Philly D - Qty: 1set - Paypal
4.Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
5.
6.
7.
8.
9.
10.

Front set: Stock 4.875\" diameter springs & Stock Diameter shaft - - Unknown drop at this time - $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3. Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5. Cody Nobbs - fbodyfreakls1@gmail.com - Sleepin....zzzzz - 1 - paypal
6. Derek Fulk - drokkr01@gmail.com - drokkr- Qty 1 - Paypal
7.
8.
9.
10.

Front Set: Coil over springs. Designed for 2.5\" Coil-Overs - Unknown drop at this time - $75.00-100.00
1. Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
2.
3.
4.
5.
6.
7.
8.
9.
10.


PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Tuesday, December 02, 2014 5:47 PM
I want in, but I won't have cash available till the beginning of the year. Will I still be able to?
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Wednesday, December 03, 2014 3:18 AM
It really depends on when Richard finishes everything, but I assume there will be a few sets laying around at that time.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Wednesday, December 03, 2014 6:02 PM
That works
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Friday, December 05, 2014 8:33 AM
Mike

Is there any update on the stock rears?
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Monday, December 15, 2014 4:37 AM
Ok, updates. The last 2.5" rear coil over set was just sold. Richard is working on making some more to stock. Should be a few weeks.


The Stock diameter rears are back from powder coating, and waiting on the urethane spring isolators. Prothane is taking their sweet time.


I'll start sending out invoices as soon as Prothane gets back to us.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Monday, December 22, 2014 11:55 AM
Darn you Prothane.


I miss my Cavalier, even if it made 100 hp on a cold day and had more suspension then it deserved.
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Saturday, January 03, 2015 5:54 PM
can i still get in on a set of stock front and back ?
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Monday, January 05, 2015 3:42 AM
Yes, you can....and agreed. STILL waiting on the damn spring isolators.



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Thursday, January 08, 2015 5:40 PM
Rear Set: Stock / Lowering springs. - 4.25\" Stock Diameter spring- Stock Strut shaft diameter. - Koni Yellows would require the bushing drilled for the larger diameter shafts. 1/4\" additional drop- $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - Installed!
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5.Cody Nobbs - fbodyfreakls1@gmail.com - Sleepin....zzzzz - 1 - paypal
6.Aaron Garcia - amgarcia2008@gmail.com - Aaron Garcia - 1- Paypal
7. Lukas Jansons - LukasJansons@hotmail.com - Blue2000cavalier - Qty 1 - Paypal
8. Derek Fulk - drokkr01@gmail.com - drokkr- Qty 1 - Paypal
9.Brian Lorello- lorello@cebridge.net- sppok427- qty 1- paypal
10.

Rear Set: Coil over springs. Designed for 2.5\" Coil-Overs - Specifically BC Coilovers - 1/4\" additional drop - $75.00-95.00
1. James MacKenzie - macktruck(dot)mackenzie(at)gmail(dot)com - macktruck84 - Qty: 1 set - Paypal
2. Evan Maddox - TheDizasterChild@gmail.com - Evan Undead - Qty: 1 set - PayPal
3.Phil Duerr - cavfiredesire@hotmail.com - Philly D - Qty: 1set - Paypal
4.Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
5.
6.
7.
8.
9.
10.

Front set: Stock 4.875\" diameter springs & Stock Diameter shaft - - Unknown drop at this time - $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3. Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5. Cody Nobbs - fbodyfreakls1@gmail.com - Sleepin....zzzzz - 1 - paypal
6. Derek Fulk - drokkr01@gmail.com - drokkr- Qty 1 - Paypal
7.Brian Lorello- lorello@cebridge.net- sppok427- qty 1- paypal
8.
9.
10.

Front Set: Coil over springs. Designed for 2.5\" Coil-Overs - Unknown drop at this time - $75.00-100.00
1. Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
2.
3.
4.
5.
6.
7.
8.
9.
10.
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Friday, January 09, 2015 12:11 PM
Rear Set: Stock / Lowering springs. - 4.25\" Stock Diameter spring- Stock Strut shaft diameter. - Koni Yellows would require the bushing drilled for the larger diameter shafts. 1/4\" additional drop- $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - Installed!
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5.Cody Nobbs - fbodyfreakls1@gmail.com - Sleepin....zzzzz - 1 - paypal
6.Aaron Garcia - amgarcia2008@gmail.com - Aaron Garcia - 1- Paypal
7. Lukas Jansons - LukasJansons@hotmail.com - Blue2000cavalier - Qty 1 - Paypal
8. Derek Fulk - drokkr01@gmail.com - drokkr- Qty 1 - Paypal
9.Brian Lorello- lorello@cebridge.net- sppok427- qty 1- paypal
10. Robert Dugre - robertd@sapphire-design.com - qty 1 - paypal

Rear Set: Coil over springs. Designed for 2.5\" Coil-Overs - Specifically BC Coilovers - 1/4\" additional drop - $75.00-95.00
1. James MacKenzie - macktruck(dot)mackenzie(at)gmail(dot)com - macktruck84 - Qty: 1 set - Paypal
2. Evan Maddox - TheDizasterChild@gmail.com - Evan Undead - Qty: 1 set - PayPal
3.Phil Duerr - cavfiredesire@hotmail.com - Philly D - Qty: 1set - Paypal
4.Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
5.
6.
7.
8.
9.
10.

Front set: Stock 4.875\" diameter springs & Stock Diameter shaft - - Unknown drop at this time - $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3. Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5. Cody Nobbs - fbodyfreakls1@gmail.com - Sleepin....zzzzz - 1 - paypal
6. Derek Fulk - drokkr01@gmail.com - drokkr- Qty 1 - Paypal
7.Brian Lorello- lorello@cebridge.net- sppok427- qty 1- paypal
8. Robert Dugre - robertd@sapphire-design.com - qty 1 - paypal
9.
10.

Front Set: Coil over springs. Designed for 2.5\" Coil-Overs - Unknown drop at this time - $75.00-100.00
1. Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
2.
3.
4.
5.
6.
7.
8.
9.
10.
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Monday, January 12, 2015 8:26 PM
This is the only reason I haven't done my struts and springs yet. Luckily, I'm patient. I don't wanna put this on stock mounts, would rather have something that's more durable, works better. But agreed with above. Damn you Prothane.

I need an adultier adult.
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Monday, January 12, 2015 9:39 PM
Hey intrested here, is there a deadline? I too don't have the cash right now but would like in if possible for front and back. I see there not all finalized yet. Running kyb agx on ground control coilovers. And to answer bout stiffness setting, new setup but currently running 2 front, 4 back, although gonna turn the rears up when it gets nicer. 3/4 drop front, slammed in rear.


ReD RaiN
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Tuesday, January 13, 2015 4:21 AM
As of this moment. 10 sets are made, and still waiting on the isolators. I keep bugging them, and was told they are being made...but that is the exact same response I received last time.

I assume once they start shipping they will be sold fast. I assume someone of the current ten will back out though, and there will be extras.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Tuesday, January 13, 2015 8:56 PM
Could u tell me what it'll cost for the set for my setup?


ReD RaiN
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Wednesday, January 14, 2015 3:15 AM
At this moment. Looks to be $175 shipped.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Friday, January 16, 2015 9:20 PM
Hey question on the front mounts, sry in advance if this is the wrong place to ask but how does front solid mounts work exactly.. Like the rubber ones bushings flex when u turn, what Bout the solid ones? Would this cause the wheels to slide easier? Also how would camber be adjusted?


ReD RaiN
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Saturday, January 17, 2015 9:44 AM
There is a bearing in the center of the front mount. You need this to allow the wheels to pivot. At this time, I do not think we will be offering chamber adjustment, but that is not set in stone yet.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Saturday, January 17, 2015 9:57 AM
Has prothane gotten back to you about the stock rear isolators?
Re: (Feeler) Group Purchase, Solid Rear Mounts - HT Motorsports / Held, 95-05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Tuesday, January 27, 2015 12:43 PM
and we are still getting nowhere....I'm trying, but yeah....




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search