Will the back fenders clear with bags without rolling or do I need to roll them?
<img src="http://home.insightbb.com/~dvboard/sig2.gif">
Here's a pic of my rear with bags... I have not rolled my fenders...
If you look near the 'G' of Goodyear on the tire, that is where your tires will rub... if you have anything 205 or wider tires... but they will only rub when you are rolling real low..
|
V
Another shot... you can see the body lines come in near the middle, which is where my tire rubs if I roll low...
Another shot...
<b>"In this world, nothing is certain but death and taxes." </b>
Oh... right now I am rolling 195/70/14 winter tires... and they do not rub at all... the Goodyears tend to have a huge bulge when compared to the michelin tires my bro has on his car... I am 100% sure that the michelins would not rub the fenders... Goodyear just likes the phat look...
<b>"In this world, nothing is certain but death and taxes." </b>
it all depends on your rim and tire. i had a problem with my hitting the rear fender. i didnt know til i got out of my car one day and i saw little strips of my tire coming off. nothing to big just really really thin. i hit the inner lip up and now i dont have a problem
roll them and be worry free that your not gonna cut down a tire
Phil Thacker
JCO North President
I had to roll everything. My front fenders still bulge out when I drop down.
I am all that is man
when you guys roll the fenders doesnt your paint crack off all around the lip? And what did ya use to roll them?
I had to roll mine, but I got 19x8s on there. As far as paint cracking, on my passanger side it did, but that was because that wasn't the factory paint on there, it was a crappy paint job, however, the side that has the factory paint didn't crack at all.
Heat the paint and roll slow and now cracks, I had mine professionaly done
<img src="http://mywebpages.comcast.net/pahtcub/sample.jpg">
Still a Non-member of Team Unofficial even though everyone else b!tched out!!!!
"No club, no rules, no leaders,no sponsors, NO Bull$hit"
i only had to roll my rear left, but i rolled the other one too just to be safe....
<img src="http://memimage.cardomain.net/member_images/10/web/502000-502999/502220_128.jpg">
how did everyone roll fenders, baseball bat trick?
1st 1st gen on air.....
hammer
<img src="http://memimage.cardomain.net/member_images/10/web/502000-502999/502220_128.jpg">
how can u roll the quarter panels because its pinch welded?
<img src="http://home.insightbb.com/~dvboard/sig2.gif">
anyone?
<img src="http://home.insightbb.com/~dvboard/sig2.gif">
hammer and block or wood worked for me on all 4 corners
Phil Thacker
JCO North President
