Horsepower and torque - Third Generation Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Horsepower and torque
Tuesday, September 20, 2005 1:23 PM
Does anybody know how much horsepower and torque a 1996 sunfire 2.2l has ?

Re: Horsepower and torque
Tuesday, September 20, 2005 1:25 PM
BTW it's a 2 door 5 speed
Re: Horsepower and torque
Tuesday, September 20, 2005 1:30 PM
hmmmmm, SEARCH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


Go Premium, it builds character!

Re: Horsepower and torque
Tuesday, September 20, 2005 1:40 PM
2.4.1) Stock performance information
------------------------------------
*****> Hey, I need some help with this section.. Any of you with old mags
*****> please consult them for these specs... thanks!

Performance numbers are for the 5-speed. Automatics may differ.

|2.4 I-4 |2.3 I-4 |2.2* I-4 |2.2** I-4 |
--------------------+-----------+-----------+-----------+-----------|
HP @ rpm |150 @ 5600 |150 @ xxxx |120 @ 5250 |115 @ xxxx |
Torque @ rpm |155 @ 4250 |145 @ xxxx |130 @ 4000 |135 @ xxxx |
0-60 mph | | | | |
1/4 mile | | | | |
--------------------+-----------+-----------+-----------+-----------+
* 1995-1997 Models
** 1998+ Models

|2.0T I-4 |2.0 I-4 |1.8 I-4 |1.8T I-4 |
--------------------+-----------+-----------+-----------+-----------|
HP @ rpm |xxx @ xxxx |xxx @ xxxx | 84 @ xxxx |xxx @ xxxx |
Torque @ rpm |xxx @ xxxx |xxx @ xxxx |108 @ 3800 |xxx @ xxxx |
0-60 mph | | | | |
1/4 mile | | | | |
--------------------+-----------+-----------+-----------+-----------+

|2.8 V6 |3.1 V6 |
--------------------+-----------+-----------|
HP @ rpm |120 @ xxxx |140 @ 4200 |
Torque @ rpm |185 @ 4000 |185 @ 3400 |
0-60 mph | | |
1/4 mile | | |
--------------------+-----------+-----------+



Premium as of January 25, 2005. Support the Org.
Re: Horsepower and torque
Tuesday, September 20, 2005 1:42 PM
Hard to understand...maybe. HP 120@5250 rpm and Torque 130@4000 rpm.


Premium as of January 25, 2005. Support the Org.
Re: Horsepower and torque
Tuesday, September 20, 2005 6:57 PM
Thanks Alot
Re: Horsepower and torque
Wednesday, September 21, 2005 9:30 PM
Sam Howe wrote:hmmmmm, SEARCH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


If you can type something like that than you obvious must know the answer. Instead of being rude and typing that, be helpful and answer their question.

Thank You James for answer his question.



www.kronosperformance.com / 732-742-8837

Re: Horsepower and torque
Thursday, September 22, 2005 3:57 AM
's alright.


Premium as of January 25, 2005. Support the Org.
Re: Horsepower and torque
Thursday, September 22, 2005 11:26 PM
Yeah dont be an ass about it just cause you dont know the answer!

120 hp is right for 95-97. Torque I am not sure about but 130 sounds about right. But I do know that 98 and up with the 2200 non ecotec is 115hp. No clue at to why it went down.


Boosted 97 2.2L 5 Speed
Boosted 3.4L soon to come
Re: Horsepower and torque
Friday, September 23, 2005 12:07 AM
Ok everyone...this is to stop all the confussion...

1995-97 2.2 OHV - 120 Horsepower / 130 lbs of Torque
1998-2002 2200 OHV - 115 Horsepower / 135 lbs of Torque
1995 2.3 L.O. Quad 4 - 160 Horsepower / 155 lbs of Torque
1996-2002 2.4 TC - 150 Horsepower / 155 lbs of Torque
2002-2005 2.2 ECOTEC - 140 Horsepower / 150 lbs of Torque

Enjoy



www.kronosperformance.com / 732-742-8837

Re: Horsepower and torque
Friday, September 23, 2005 2:48 AM
150hp for the 2.3

The 92 Lo had 160hp. The 95 had smaller port, smaller cams, balance shaft and a chip that need to be change(for the 5spd).



Gilles
2.3 Ho


Re: Horsepower and torque
Friday, September 23, 2005 6:23 AM
Sunfire GTR wrote:Yeah dont be an ass about it just cause you dont know the answer!

120 hp is right for 95-97. Torque I am not sure about but 130 sounds about right. But I do know that 98 and up with the 2200 non ecotec is 115hp. No clue at to why it went down.


In '98 the 2.2 had alot of minor changes, but the biggest factor for the decrease in HP and increase in Torque is a change in the cam profiling. GM did this to give the 2.2 a bit more mid-range power.




J-Body Club of Ontario / Messageboard / My PhotoBucket

'01 Cavalier~2200SFI~4-Speed Automatic - 17.501sec @ 76.864mph (1/4)
Re: Horsepower and torque
Friday, September 23, 2005 7:27 AM
I thought the LD9 had 167ft/lbs of tq, atleast according to msn auto's anyway..


Re: Horsepower and torque
Friday, September 23, 2005 7:47 AM
Ender_Wiggin wrote:I thought the LD9 had 167ft/lbs of tq, atleast according to msn auto's anyway..


Nope...the LD9 in the J-Body always had around the 150HP/155TQ mark. No more.




J-Body Club of Ontario / Messageboard / My Cardomain

'01 Cavalier~2200SFI~4-Speed Automatic - 17.501sec @ 76.864mph (1/4)
Re: Horsepower and torque
Friday, September 23, 2005 7:53 AM
Msn auto info are not good. some are but not everything.



Gilles
2.3 Ho

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search