3100/3400 swap guys. Anyone interested? - Third Generation Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
3100/3400 swap guys. Anyone interested?
Monday, September 03, 2012 5:21 PM
So I'm gauging interest on some 3x00 specific parts here. Thinking of getting rid of the whole car.

I have.

3500 heads and intakes
3400 heads and intakes
RSM Stock size aluminum crank pulley
WOT-Tech N-body solid upper mount.

And it's a long shot, but I've got a MS-II with wire harness as well.





i find it amusing that SHOoff has nothing better to do but follow me around & be an unhelpful dick in even cross-forum. - Jon Mick

Re: 3100/3400 swap guys. Anyone interested?
Tuesday, September 04, 2012 8:30 AM
If you were doing this over the winter, I'd be all over the 3500 heads and the crank pulley, but money is gonna be tight for me until the end of the year.



I'm cleaning out my garage!
Billet upper mount for 3rd gen V6 swap!


Re: 3100/3400 swap guys. Anyone interested?
Tuesday, September 04, 2012 9:35 AM
Sad green panda.





Re: 3100/3400 swap guys. Anyone interested?
Tuesday, September 04, 2012 3:42 PM
You could probably sell the MS on V6Z24.
.



Re: 3100/3400 swap guys. Anyone interested?
Wednesday, September 05, 2012 4:54 PM
Can you give some more details on the upper mount? Is it a direct bolt in? Im interested. Also prices on that and the ms please.





Re: 3100/3400 swap guys. Anyone interested?
Wednesday, September 05, 2012 7:35 PM
It's a direct replacement for the N-body upper mount. Anyone with the N-body upper finds out that the 3x00's tear them up real quick.





i find it amusing that SHOoff has nothing better to do but follow me around & be an unhelpful dick in even cross-forum. - Jon Mick
Re: 3100/3400 swap guys. Anyone interested?
Wednesday, September 05, 2012 8:06 PM
i would be interested in teh 3500 intake and mount for mine.



Re: 3100/3400 swap guys. Anyone interested?
Monday, September 10, 2012 9:49 PM
Mike (Needs Boost) wrote:

i would be interested in teh 3500 intake and mount for mine.


Just the Intake? Or you talking about the heads too?





i find it amusing that SHOoff has nothing better to do but follow me around & be an unhelpful dick in even cross-forum. - Jon Mick
Re: 3100/3400 swap guys. Anyone interested?
Tuesday, September 11, 2012 1:17 PM
I no longer need the mount but I will know very soon if I can buy the squirt. I hope so. A tuned 3400 in a first gen would be sweet!





Re: 3100/3400 swap guys. Anyone interested?
Saturday, October 13, 2012 12:47 PM
Zs Z wrote:

I no longer need the mount but I will know very soon if I can buy the squirt. I hope so. A tuned 3400 in a first gen would be sweet!



already done in a 2ndgen with a first gen front clip lol


watch for flying sparks!!!
Re: 3100/3400 swap guys. Anyone interested?
Friday, October 19, 2012 4:10 PM
SHOoff wrote:

Mike (Needs Boost) wrote:

i would be interested in teh 3500 intake and mount for mine.


Just the Intake? Or you talking about the heads too?


i have a 3500 with ported heads but the intake was trashed in an accident so i need that and a mount to throw her in.




Re: 3100/3400 swap guys. Anyone interested?
Saturday, October 20, 2012 5:08 AM
Mike

Nobody seemed to be particularly interested in anything. So I'm back to deciding what I want to do with it. If I put the engine back together I'll be using my 3500 stuff. I plan on using the 3400 upper though. So if I go that route, the upper would still be open, if that's what you were wanting.





i find it amusing that SHOoff has nothing better to do but follow me around & be an unhelpful dick in even cross-forum. - Jon Mick
Re: 3100/3400 swap guys. Anyone interested?
Saturday, October 20, 2012 7:24 AM
that would be fine, basically the inlet is what got snapped to that is literally all i would need



Re: 3100/3400 swap guys. Anyone interested?
Friday, December 14, 2012 4:37 PM
your parting out the swap?
Re: 3100/3400 swap guys. Anyone interested?
Saturday, December 15, 2012 7:31 AM
thats what im doing, im using the 3500 heads and 3400 upper intake as well.
Re: 3100/3400 swap guys. Anyone interested?
Saturday, December 15, 2012 11:27 AM
jacob mahon wrote:

your parting out the swap?


I've got a set of 99 3400 heads and lower intake. I'm most likely going to be using the 3400's upper intake.





i find it amusing that SHOoff has nothing better to do but follow me around & be an unhelpful dick in even cross-forum. - Jon Mick
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search