99+ 2200 without EGR in 98 - Third Generation Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
99+ 2200 without EGR in 98
Tuesday, March 12, 2013 1:34 PM
So I bought a 1998 4 Door Cavalier that is in nice shape..... 5 miles after i bought it it spun 2 rod bearings... I have a 99 Engine without the EGR.... MY question is will the 99+ engine be fine just have a check engine light on for not having an EGR Ive done Research and haven't found anything about this.... if not herd back from in the next couple days ill let you guys know how it goes....


Erik Packard

Re: 99+ 2200 without EGR in 98
Friday, March 15, 2013 5:37 PM
egr is the least of your worries you need to swap stuff off your 98 engine for it to work right
knock sensor
egr
intake and exhaust manifold
injectors



JBO since July 30, 2001
Re: 99+ 2200 without EGR in 98
Saturday, March 16, 2013 4:27 PM
why replace the knock sensor it plugged right into the 99 one and i ended up swapping the 98 head over with the intake and injectors anything else... Funny story i got it all put together went to start it and pushed the clutch pedal and it blew the master off the firewall any idea.... well im replacing the master tomorrow will let you know how that works out


Erik Packard
Re: 99+ 2200 without EGR in 98
Monday, April 08, 2013 4:18 PM
Bump? Did this work out? my buddy has the same project. 98 cavi with bad 2200 and has another 2200 without egr.



"If I'm not back in 5 minutes...just wait longer"
Re: 99+ 2200 without EGR in 98
Tuesday, April 09, 2013 10:27 AM
worked out just fine just had egr code and had a rich code but i just pulled the bulb but for a daily driver what do i care


Erik Packard
Re: 99+ 2200 without EGR in 98
Tuesday, April 09, 2013 5:27 PM
ignore my post i didn't see the 2200 thing

enigne should work you may just have to put the 98 EGR on



JBO since July 30, 2001
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search