no turn signals, hazards, high beams or DRL's - Third Generation Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
no turn signals, hazards, high beams or DRL's
Tuesday, December 22, 2015 11:18 PM
I have a 99 Z24 and none of these are working. No clicking, and no indicators when I switch them on. Also when the car is running, the High beam indicator is lit up, and when I turn the lights on, the turn signal indicators light up, when I switch either side on with the lights on, the indicators go out. From what I've read, it sounds like the combination switch.

Re: no turn signals, hazards, high beams or DRL's
Tuesday, December 22, 2015 11:25 PM
Pix: the driver's side turn indicator also lights up, but only for a second, then it goes out
Attachments
12376245_10154417934449447_7928597510494400133_n.jpg (21k)
12392058_10154417934489447_5202132870465064309_n.jpg (37k)

Re: no turn signals, hazards, high beams or DRL's
Sunday, March 06, 2016 9:40 PM
I know it's super late, and you probably fixed this, but its 1 am and I am bored, so check your ground under your battery tray, it is bolted to the "frame rail." It is known to corrode and cause weird electrical problems.


- Your not-so-local, untrained, uncertified, backyard mechanic. But my @!#$ runs
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search