MSD DIS-2 - Nitrous Oxide Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
MSD DIS-2
Tuesday, August 09, 2005 6:36 PM
How hard is it to install the dis-2. I have no idea.

Re: MSD DIS-2
Tuesday, August 09, 2005 7:11 PM
What engine




Re: MSD DIS-2
Wednesday, August 10, 2005 9:53 AM
97 2.2 cavy
Re: MSD DIS-2
Thursday, August 11, 2005 12:29 PM
It shouldn't be too hard for you if you can install a headunit on your own and use a volt meter ot install a nitrous kit. It took me all of 1-1/2 hours tops including eating lunch lol. but i got my box used and it worked great for about 2-3 weeks and it @!#$ it self so i took the box out and hope to get another soon.

Don't foreget that the ln2 needs the coil interface adaptors and once you wire those up you connet the plug to the msd box and and make up batery connections your good to go. when you get the interface adaports just follow the diagram that is included ot go to MSD's web page and look up the instructions on a pdf file.

Good luck
jeff




Re: MSD DIS-2
Friday, August 12, 2005 1:10 PM
rather easy on those motors somewhere in the FAQ there is a guide for it



1989 Turbo Trans Am #82, 2007 Cobalt SS G85





Re: MSD DIS-2
Tuesday, August 16, 2005 7:45 PM
its pretty easy i did it on my 98 2200., have some one good with electrical,standing by.
Re: MSD DIS-2
Tuesday, August 16, 2005 8:27 PM
Yah, easy as long as you got everything you need. Read the FAQ, it's on the first page. A search might also help.
Re: MSD DIS-2
Wednesday, August 17, 2005 12:11 PM
where do you get the adaptors from?


vrooooom
Re: MSD DIS-2
Wednesday, August 17, 2005 12:54 PM
summit racing



1989 Turbo Trans Am #82, 2007 Cobalt SS G85





Re: MSD DIS-2
Wednesday, August 17, 2005 2:19 PM
yea... im not seeing anything listed in the faq section...


vrooooom
Re: MSD DIS-2
Wednesday, August 17, 2005 2:31 PM
is this the right one to get? click here


vrooooom

Re: MSD DIS-2
Tuesday, August 23, 2005 9:13 PM
Yea that will work




Re: MSD DIS-2
Friday, August 26, 2005 9:18 AM
Get the programmable DIS-2. It is so much easier to tune and has more options than the regular DIS-2.




275hp & 306tq - 1999 2.2 ohv
13.2 @ 108 mph
-1996 2.4 liter + Turbo + Built motor + Torco + More boost = Lots o' Power
-2000 Mustang GT + 2004 Cobra motor, Whipple 2.3 supercharger,
built rear-end,Dodge Viper spec T56 6 speed, bolt-ons = wheelies at the track!!!!!

Re: MSD DIS-2
Tuesday, August 30, 2005 12:29 AM
Are you sure you use the DIS-2 because the 2.2 OHV does have a distributor?



www.kronosperformance.com / 732-742-8837

Re: MSD DIS-2
Tuesday, August 30, 2005 2:40 AM
The 2.2 ohv uses coilpacks, not distributors. By the way, Adler is selling his programmable MSD DIS-2 with the MSD coil interface modules.




If it's not fast, juice it!!!
Re: MSD DIS-2
Tuesday, August 30, 2005 2:47 AM
NX JuicedFire wrote:The 2.2 ohv uses coilpacks, not distributors. By the way, Adler is selling his programmable MSD DIS-2 with the MSD coil interface modules.


Ok thank you for clearing that up...I'm not too "keen" on the 2.2 OHVs but I'm still learning...



www.kronosperformance.com / 732-742-8837

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search