Those of you running a wet shot? - Nitrous Oxide Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Those of you running a wet shot?
Tuesday, October 25, 2005 5:08 PM
I'm running a wet shot on a 2200... The line I spliced into for fuel seems to be leading from the fuel rail, and it's worked good so far. BUT, I just got a fuel pressure gauges and installed the sensor on that line ( the line runs to my nitrous control box) and I am reading only about 2PSI fuel pressure, maybe 3 or four sometimes....???

A buddy of mine who is into Acuras told me that I might have spliced fuel from the return line from the fuel rail? I had no idea this was possible? Any other ideas?

Re: Those of you running a wet shot?
Tuesday, October 25, 2005 8:24 PM
the high pressure line is usually above 45psi

so unless you installed the pressure gauge wrong.... you spliced the wrong line




Re: Those of you running a wet shot?
Tuesday, October 25, 2005 10:11 PM
So there is a second line?
Re: Those of you running a wet shot?
Tuesday, October 25, 2005 11:26 PM
Read the very first sticky............

why did I even make it??


N2O + Bolt-ons = 220Hp/250Tq

Coming Soon:HpTunersPro, EagleConnectingRods, WiescoPistons, 13sec2200

Re: Those of you running a wet shot?
Wednesday, October 26, 2005 11:05 AM
Read the first sticky... seems I did tap into the high pressure line after all

I have the sensor installed on the line to the ZEX box, so there's no flow until I hit the juice... that shouldn't have any affect on pressure right?
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search