parts for nitrous - Nitrous Oxide Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
parts for nitrous
Saturday, November 19, 2005 7:31 PM
hey everyone io drive a 2001 pontiac sunfire 2200 and my friend has a NOS wet kit that he can sell me for 150 . it has the bottle , bottle holder, the pressure valve on the tip, of the bottle , the silenoids , and the nossle that goes in the intake . i know i need a steel braided line to go from the trunk to under the hood but what else would i need? a fuel T? and hel p is greatly appreciated . i only plan to run 35 for now and maybe 50 for the track . i will order some 1 step colder plugs, and i run 93 oct. gas all the time . any help is greatly appreciated.

Re: parts for nitrous
Sunday, November 20, 2005 9:02 PM
The Nitrous and Fuel Jets.
Fuel Tee
Possibly filters for the solenoids.
Switches, one for the acticvation in the car and one microswtich for the thottle cable.
Braided hoses to go from the solenoids to the intake.

I believe that is about all of it. You should be able to go to their website and check what all you need along with the prices of em..

Hope this helps..

http://registry.gmenthusiast.com/images/importkilla32/Bullit.JPG
Re: parts for nitrous
Sunday, November 20, 2005 10:55 PM
if your 2200s timing and spark advance has not been played around with that 93 octane your running right now could be hurting your engine.......

Lee


JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...
Re: parts for nitrous
Monday, November 21, 2005 8:28 AM
blade0604 wrote:hey everyone io drive a 2001 pontiac sunfire 2200 and my friend has a NOS wet kit that he can sell me for 150 . it has the bottle , bottle holder, the pressure valve on the tip, of the bottle , the silenoids , and the nossle that goes in the intake . i know i need a steel braided line to go from the trunk to under the hood but what else would i need? a fuel T? and hel p is greatly appreciated . i only plan to run 35 for now and maybe 50 for the track . i will order some 1 step colder plugs, and i run 93 oct. gas all the time . any help is greatly appreciated.


sound like you got a good deal. Don't forget all the wiring and relay assembly. I know your auto but I would still recomend a rpm window switch and a fuel pressure safty switch. You should be able to get all of the parts you need from here.....

http://www.dynotunenitrous.com/store/Scripts/default.asp
or
http://www.nitroussupply.com/
or
http://www.nitrousexpress.com/
or
http://www.koehlerinjection.com/Koehler/NMproducts/nitrous_master_products.htm
or
http://www.barrygrant.com/nitrous/
or
http://www.summitracing.com/

If you need any more help don't hesitate to ask.

Jeff




Re: parts for nitrous
Thursday, November 24, 2005 2:51 PM
hey lee... what u mean i can be hurting my engine? how? what do i need to do to my ignittion and spark to help ? i'm going pick up the kit tonight and i will buy all the parts it doesn'thave. i will run a 35 shot for a few weeks then go up from there. but i plan on a 75 later on . i will post back when i get all the parts .
Re: parts for nitrous
Thursday, November 24, 2005 7:52 PM
I believe what he means is the 93 octane is going to hurt yourt car unless you tweek with the computer. Our cars do not like the 93 octane gas. .

http://registry.gmenthusiast.com/images/importkilla32/Bullit.JPG
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search