2.4 wet system help - Nitrous Oxide Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
2.4 wet system help
Thursday, May 25, 2006 10:23 AM
hello im in md and was wandering if anyone local would be willing to give advice on a wet system install. im not familiar with no2 so i would like some pointers from a 2.4 owner thanx hit via email nastynate1980@hotmail.com or here thanx nate




Re: 2.4 wet system help
Thursday, May 25, 2006 2:52 PM
the 2.4 install shouldn't be that much different from the ecotec install
but just do some research and you should get what you need


http://www.cardomain.com/ride/2208703
Re: 2.4 wet system help
Friday, May 26, 2006 2:36 PM
ive done the research, i know i can do it, but i would if nothing else like to see it in person, you know whaT i mean?



Re: 2.4 wet system help
Saturday, May 27, 2006 1:03 AM
I am in Laurel, 30 minutes from you..... If you need help you can do the install in my garage or if you just want to see an installed system just come check out the nitrous ser-up on my sunbird.. it isn't much different.



Cardomain|Myspace

Re: 2.4 wet system help
Saturday, May 27, 2006 1:03 AM
forgot to check "e-mail replies"



Cardomain|Myspace

Re: 2.4 wet system help
Saturday, May 27, 2006 6:32 PM
hahaha, I was readin this post and was just about to pimp you out Josh....

Scott



When I boost, you boost, we boost
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You have been banned from NEJBODY.
You've displayed wayyy too many acts of pushing people to their limits.
It's never cool to tear people down for what they want to do.
NEJBODY is a team. We're not the same as JBO where everyone bashes on eachother.
I'm surprised you show up to our meets after half of the things you say on here.
Re: 2.4 wet system help
Saturday, May 27, 2006 11:15 PM
^^^You the man, man.



Cardomain|Myspace

Re: 2.4 wet system help
Monday, May 29, 2006 12:05 PM
all right my roommate works in Laurel so maybe ill make a trip out of it. do you have the 2.3? i would like to see it i will let you know



Re: 2.4 wet system help
Monday, May 29, 2006 3:15 PM
dario wrote:the 2.4 install shouldn't be that much different from the ecotec install
but just do some research and you should get what you need


2.4 and 2200/2.2 install are basically the same

Eco is different as they have a fuel tap.


N2O + Bolt-ons = 220Hp/250Tq

Coming Soon:HpTunersPro, EagleConnectingRods, WiescoPistons, 13sec2200

Re: 2.4 wet system help
Wednesday, May 31, 2006 10:10 PM
A nitrous install is a nitrous install.....
Re: 2.4 wet system help
Thursday, June 08, 2006 11:04 AM
hey fst cavy...not every body has installed no2, if you cant help me dont post thanx




Re: 2.4 wet system help
Thursday, June 08, 2006 11:36 AM
If you are mechanically inclined it should be relatively self-explanitory. Tap the fuel feed, hook the lines between the solenoids to the nozzle and the bottle or fuel tap on th other side. Comes with a wiring diagram.
Pretty easy.. and again, it is self explanitory.



Cardomain|Myspace

Re: 2.4 wet system help
Monday, June 12, 2006 8:36 AM
Thank you MINION, you are more motivated to explain things than I am!! But anways, not to thread jack, but Minion, I asked you about a 3 inch mandrel exhaust a while ago, piping from where the turbo downpipe would be back to where the muffler would be, in the two sections. I can weld, so making it work to get tooked up witht the downpipe and back by the muffler, would be fine. I just need a new exhaust and I dont feel like piecing it all together, I dont have enough time. PM me, thanks
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search