what size AN fitting for blow down tube - Nitrous Oxide Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
what size AN fitting for blow down tube
Tuesday, August 29, 2006 5:48 PM
As the topic states does anyone know what size the AN fitting is on the blowdown tube size? I want to run a braided line there instead of a typical blow down tube for a bottle mounting reason. Thanks




Winks Online Click Here


Re: what size AN fitting for blow down tube
Wednesday, August 30, 2006 11:13 AM
IIRC you HAVE to run the hardened blow down tube if your setup requires one. It is a safety issue and thusly won't be accepted any way but designed if trying to go through tech at a race track.

Just a heads-up.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Re: what size AN fitting for blow down tube
Wednesday, August 30, 2006 5:32 PM
yea I know I don't do track anyways though.

Thanks for the heads up anyways.




Winks Online Click Here

Re: what size AN fitting for blow down tube
Thursday, August 31, 2006 7:24 PM
-6 AN / JIC fittings mostly for the street systems.

If you're going to run a SS flex line as a blow tube, at least attach it to a AN -6 bulkhead fitting to the sheet metal you want to pass it through.

A 1,000 psi fire hose with no one manning the end is pretty scarey. If the nitrous doesn't knock you out, the whipping hose might.




.
.
Project S-Bird
Re: what size AN fitting for blow down tube
Saturday, September 02, 2006 7:55 AM
Oh belive me this thing isn't going to budge lol I'm like that when it comes to this kind of stuff. Thanks for the info


Winks Online Click Here

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search