best way to do direct port nitrous - Nitrous Oxide Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
best way to do direct port nitrous
Thursday, March 01, 2007 7:28 PM
what the best way to do direct port nitrous


upgrading my intake manifold

Re: best way to do direct port nitrous
Thursday, March 01, 2007 9:48 PM
what exactly are you asking?


what are the options?


you mount a nozzle in each of the intake runners aimed right into the intake ports of the head and the run all your lines...... thats what dirrect port is



Re: best way to do direct port nitrous
Saturday, March 03, 2007 9:22 AM
yes what do i have to do to do it
Re: best way to do direct port nitrous
Saturday, March 03, 2007 10:46 AM
you drill holes in your manifold, tap them, aim the nozzles at your valves, and run teh lines. i really dont think it can be explained any better...



JBO Stickers! Get yours today!
Re: best way to do direct port nitrous
Saturday, March 03, 2007 11:56 AM
ok thanks if i have the 2.2l 2200 some one told me its easier and you can use the 2.3l intake manifold
Re: best way to do direct port nitrous
Saturday, March 03, 2007 4:55 PM
no. you cannot use the 2.3 on any ohv engine.



JBO Stickers! Get yours today!
Re: best way to do direct port nitrous
Tuesday, March 06, 2007 9:11 AM
anyone have like detailed instructions on how to do the drilling and everything
Re: best way to do direct port nitrous
Tuesday, March 06, 2007 9:31 AM
search man...
step 1, get a drill. and a drill bit that is the size of your nozzles.
step 2, remove your intake manifold.
step 3, drill one hole in each runner about an inch away from the valve side flange of the manifold.
step 4, ream and tap said holes, and then use compressed air to make sure you dont have any filings or shavings in your runners.
step 5, install the nozzles, with the opening for the n2o/fuel mixture toward the valves.
step 6, reinstall the manifold and run your lines.
step 7, purge to look like a badass.
this should get you started.





JBO Stickers! Get yours today!
Re: best way to do direct port nitrous
Wednesday, March 07, 2007 9:42 AM
Adam Lewis wrote:anyone have like detailed instructions on how to do the drilling and everything
If you don't know how to use a drill, you're not ready for a direct port setup...



fortune cookie say:
better a delay than a disaster.
Re: best way to do direct port nitrous
Thursday, March 08, 2007 7:30 PM
i mean like where i have 2 do it so i dont mess up
Re: best way to do direct port nitrous
Friday, March 09, 2007 7:27 AM
http://www.overboost.com/story.asp?id=255

there is a tech article on doing. I used the almighty power of searching. Here is a pic of a tapped manifold. I've never done it before, but it seems very straightforward.






Re: best way to do direct port nitrous
Friday, March 09, 2007 10:57 AM
Adam Lewis wrote:i mean like where i have 2 do it so i dont mess up


o

m

g
.
.
.


do you think there was a writeup for the first person that did this? do you think it was some college grad? hell no, it was some guy that went out, drilled holes in his intake, tapped them, and threw fome fittings in it and blew something up, and built it better next time. serioulsy, do some research. if you're asking questions like this, you're NOT ready to take this on your own. sorry.



JBO Stickers! Get yours today!
Re: best way to do direct port nitrous
Friday, March 09, 2007 1:28 PM





hear are some pics of everything so far. the trans ,eng and direct port set up. let me know what you all think.
13's or blowning it. wayhttp://i39.photobucket.com/albums/e175/slowfire99/100_0463.jpg





Advertisement

ADBOT






13's or blowning it. wayhttp://i39.photobucket.com/albums/e175/slowfire99/100_0463.jpg
Re: best way to do direct port nitrous
Friday, March 09, 2007 1:30 PM
http://www.j-body.org/forums/read.php?f=39&i=13987&t=13939#13987


here is a link to a pic of a 2200 man with direct port sorry the pic didnt carry over on the last post


13's or blowning it. wayhttp://i39.photobucket.com/albums/e175/slowfire99/100_0463.jpg
Re: best way to do direct port nitrous
Friday, March 09, 2007 1:43 PM
Adam Lewis wrote:i mean like where i have 2 do it so i dont mess up


you're not ready to do this yet. stop now, please.





Re: best way to do direct port nitrous
Saturday, March 10, 2007 11:02 AM
Rich Grayo Jr. wrote:search man...
step 1, get a drill. and a drill bit that is the size of your nozzles.
step 2, remove your intake manifold.
step 3, drill one hole in each runner about an inch away from the valve side flange of the manifold.
step 4, ream and tap said holes, and then use compressed air to make sure you dont have any filings or shavings in your runners.
step 5, install the nozzles, with the opening for the n2o/fuel mixture toward the valves.
step 6, reinstall the manifold and run your lines.
step 7, purge to look like a badass.
this should get you started.

tee hee


Edited 1 time(s). Last edited Saturday, March 10, 2007 11:02 AM


My car may run 18s, but I can do your taxes in 10 seconds flat.
JBO lube - they would never have enough in stock and we'd never see RodimusPrime again
Re: best way to do direct port nitrous
Saturday, March 10, 2007 1:18 PM
Re: best way to do direct port nitrous
Sunday, March 11, 2007 8:02 AM
search for falloutboy he did it on an eco. same deal though.


Winks Online Click Here

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search