tourqe specs??? - Nitrous Oxide Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
tourqe specs???
Monday, September 22, 2008 1:55 PM
flywheel to crank on 1998 cavalier 2.2l 5 speed... any one know the specs?

Re: tourqe specs???
Tuesday, September 23, 2008 4:19 AM
SEARCH.

Quote:

Service Information
2002 Chevrolet Cavalier | Unit Repair | Engine | Document ID: 646032
--------------------------------------------------------------------------------

Fastener Tightening Specifications
Application
Specifications

Metric
English

Balance Shaft Cover Nut and Bolt
13 N·m
115 lb in

Balance Shaft Driven Sprocket Bolt (left hand thread)

First Pass
40 N·m
30 lb ft

Final Pass
45 degrees

Balance Shaft to Housing Bolts 8 mm hex

First Pass
10 N·m
89 lb in

Final Pass
40 degrees

Balance Shaft Housing Bolts 10 mm hex

First Pass
15 N·m
11 lb ft

Final Pass
40 degrees

Balance Shaft to Block Bolts 13 mm hex

First Pass
25 N·m
18 lb ft

Final Pass
70 degrees

Balance Shaft to Block Bolts 15 mm hex
53 N·m
39 lb ft

Balance Shaft to Block Bolts 18 mm hex

First Pass
40 N·m
30 lb ft

Final Pass
60 degrees

Camshaft (exhaust) Rear Cover
14 N·m
124 lb in

Camshaft Position Sensor Bolt
10 N·m
89 lb in

Camshaft Sprocket to the Camshaft Bolt
70 N·m
52 lb ft

Connecting Rod Nuts

First Pass
25 N·m
18 lb ft

Final Pass
80 degrees

Coolant Bleeder Valve
Fully Driven, Seated , Not Stripped

Coolant Outlet to Cylinder Head
26 N·m
19 lb ft

Coolant Pump Cover to the Block
26 N·m
19 lb ft

Coolant Pump to the Coolant Pump Cover
14 N·m
124 lb in

Coolant Pump to the Timing Chain Housing
26 N·m
19 lb ft

Crankshaft Balancer to the Crankshaft

First Pass
175 N·m
129 lb ft

Final Pass
90 degrees

Crankshaft Bearing Cap Bolts

First Pass
20 N·m
15 lb ft

Final Pass
90 degrees

Crankshaft Position Sensor to Block
9 N·m
80 lb in

Cylinder Head Bolts
Refer to Procedure

Engine Coolant Air Bleed Pipe
14 N·m
124 lb in

Engine Coolant Air Bleed Pipe Nut
42 N·m
31 lb ft

Engine Coolant Temperature Sensor to the Coolant Outlet
11 N·m
97 lb in

Engine Lift Bracket
96 N·m
68 lb ft

EVAP Canister Purge Valve Solenoid Bracket Bolt
8 N·m
72 lb in

Exhaust Manifold to the Cylinder Head Nuts
42 N·m
31 lb ft

Exhaust Manifold to the Cylinder Head Studs
11 N·m
97 lb in

Exhaust Manifold Upper Heat Shield to the Manifold Bolts
26 N·m
19 lb ft

Flywheel to the Crankshaft

First Pass
30 N·m
22 lb ft

Final Pass
45 degrees

Front Cover to the Timing Chain Housing
12 N·m
106 lb in

Fuel Pipe Bracket to the Camshaft Housing

First Pass
15 N·m
11 lb ft

Final Pass
30 degrees

Fuel Pipe to the Fuel Rail Nut
30 N·m
22 lb ft

Fuel Rail to the Camshaft Housing
26 N·m
19 lb ft

Ignition Coil and Module Assembly to the Camshaft Housings
22 N·m
16 lb ft

Intake Manifold to the Cylinder Head Bolts/Nuts
24 N·m
18 lb ft

Intake Manifold to the Cylinder Head Studs
11 N·m
97 lb in

Knock Sensor
20 N·m
15 lb ft

Oil/Air Separator To Block Bolts
24 N·m
18 lb ft

Oil Dipstick Tube Bolt/Screw
8 N·m
71 lb in

Oil Filter Connector to the Block
29 N·m
21 lb ft

Oil Filter to the Block
3/4 to one complete turn after gasket contact

Oil Pan Bolts
24 N·m
18 lb ft

Oil Pan Bolts, Second Set
12 N·m
106 lb in

Oil Pan Drain Plug
26 N·m
19 lb ft

Oil Pan Studs
26 N·m
19 lb ft

Oil Passage Plug Bolt
30 N·m
22 lb ft

Oil Passage Plugs, Block 1/8x27
10 N·m
89 lb in

Oil Passage Plugs, 3/8x18
30 N·m
22 lb ft

Oil Passage Plugs, 1/4x18
20 N·m
15 lb ft

Oil Pressure Switch
14 N·m
124 lb in

Oil Pump to the Balance Shaft Housing (Long Bolts)
12 N·m
106 lb in

Oil Pump to the Balance Shaft Housing (Short Bolts)
10 N·m
89 lb in

Oxygen Sensor To Exhaust Manifold
42 N·m
31 lb ft

Powersteering Pipe to the Pump Nut
27 N·m
20 lb ft

Powersteering Pump to the Cam Carrier Bolts
26 N·m
19 lb ft

Rear Crankshaft Seal Housing to Block
12 N·m
106 lb in

Spark Plugs to the Cylinder Head
18 N·m
13 lb ft

Starter to the Block Bolt
90 N·m
66 lb ft

Tensioner to Tensioner Bracket Nut
54 N·m
40 lb ft

Throttle Body to the Intake Manifold
10 N·m
89 lb in

Thrust Plate to the Balance Shaft Housing
13 N·m
115 lb in

Timing Chain Housing to the Block Bolts/Studs
29 N·m
21 lb ft

Timing Chain Housing to the Camshaft Housings
26 N·m
19 lb ft

Timing Chain Tensioner to Housing
10 N·m
89 lb in

© 2008 General Motors Corporation. All rights reserved.



Chris




'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08

Re: tourqe specs???
Wednesday, September 24, 2008 9:53 PM
Taetsch Z-24 wrote:SEARCH.

Quote:

Service Information
2002 Chevrolet Cavalier | Unit Repair | Engine | Document ID: 646032
--------------------------------------------------------------------------------

Fastener Tightening Specifications
Application
Specifications

Metric
English

Balance Shaft Cover Nut and Bolt
13 N·m
115 lb in

Balance Shaft Driven Sprocket Bolt (left hand thread)

First Pass
40 N·m
30 lb ft

Final Pass
45 degrees

Balance Shaft to Housing Bolts 8 mm hex

First Pass
10 N·m
89 lb in

Final Pass
40 degrees

Balance Shaft Housing Bolts 10 mm hex

First Pass
15 N·m
11 lb ft

Final Pass
40 degrees

Balance Shaft to Block Bolts 13 mm hex

First Pass
25 N·m
18 lb ft

Final Pass
70 degrees

Balance Shaft to Block Bolts 15 mm hex
53 N·m
39 lb ft

Balance Shaft to Block Bolts 18 mm hex

First Pass
40 N·m
30 lb ft

Final Pass
60 degrees

Camshaft (exhaust) Rear Cover
14 N·m
124 lb in

Camshaft Position Sensor Bolt
10 N·m
89 lb in

Camshaft Sprocket to the Camshaft Bolt
70 N·m
52 lb ft

Connecting Rod Nuts

First Pass
25 N·m
18 lb ft

Final Pass
80 degrees

Coolant Bleeder Valve
Fully Driven, Seated , Not Stripped

Coolant Outlet to Cylinder Head
26 N·m
19 lb ft

Coolant Pump Cover to the Block
26 N·m
19 lb ft

Coolant Pump to the Coolant Pump Cover
14 N·m
124 lb in

Coolant Pump to the Timing Chain Housing
26 N·m
19 lb ft

Crankshaft Balancer to the Crankshaft

First Pass
175 N·m
129 lb ft

Final Pass
90 degrees

Crankshaft Bearing Cap Bolts

First Pass
20 N·m
15 lb ft

Final Pass
90 degrees

Crankshaft Position Sensor to Block
9 N·m
80 lb in

Cylinder Head Bolts
Refer to Procedure

Engine Coolant Air Bleed Pipe
14 N·m
124 lb in

Engine Coolant Air Bleed Pipe Nut
42 N·m
31 lb ft

Engine Coolant Temperature Sensor to the Coolant Outlet
11 N·m
97 lb in

Engine Lift Bracket
96 N·m
68 lb ft

EVAP Canister Purge Valve Solenoid Bracket Bolt
8 N·m
72 lb in

Exhaust Manifold to the Cylinder Head Nuts
42 N·m
31 lb ft

Exhaust Manifold to the Cylinder Head Studs
11 N·m
97 lb in

Exhaust Manifold Upper Heat Shield to the Manifold Bolts
26 N·m
19 lb ft

Flywheel to the Crankshaft

First Pass
30 N·m
22 lb ft

Final Pass
45 degrees

Front Cover to the Timing Chain Housing
12 N·m
106 lb in

Fuel Pipe Bracket to the Camshaft Housing

First Pass
15 N·m
11 lb ft

Final Pass
30 degrees

Fuel Pipe to the Fuel Rail Nut
30 N·m
22 lb ft

Fuel Rail to the Camshaft Housing
26 N·m
19 lb ft

Ignition Coil and Module Assembly to the Camshaft Housings
22 N·m
16 lb ft

Intake Manifold to the Cylinder Head Bolts/Nuts
24 N·m
18 lb ft

Intake Manifold to the Cylinder Head Studs
11 N·m
97 lb in

Knock Sensor
20 N·m
15 lb ft

Oil/Air Separator To Block Bolts
24 N·m
18 lb ft

Oil Dipstick Tube Bolt/Screw
8 N·m
71 lb in

Oil Filter Connector to the Block
29 N·m
21 lb ft

Oil Filter to the Block
3/4 to one complete turn after gasket contact

Oil Pan Bolts
24 N·m
18 lb ft

Oil Pan Bolts, Second Set
12 N·m
106 lb in

Oil Pan Drain Plug
26 N·m
19 lb ft

Oil Pan Studs
26 N·m
19 lb ft

Oil Passage Plug Bolt
30 N·m
22 lb ft

Oil Passage Plugs, Block 1/8x27
10 N·m
89 lb in

Oil Passage Plugs, 3/8x18
30 N·m
22 lb ft

Oil Passage Plugs, 1/4x18
20 N·m
15 lb ft

Oil Pressure Switch
14 N·m
124 lb in

Oil Pump to the Balance Shaft Housing (Long Bolts)
12 N·m
106 lb in

Oil Pump to the Balance Shaft Housing (Short Bolts)
10 N·m
89 lb in

Oxygen Sensor To Exhaust Manifold
42 N·m
31 lb ft

Powersteering Pipe to the Pump Nut
27 N·m
20 lb ft

Powersteering Pump to the Cam Carrier Bolts
26 N·m
19 lb ft

Rear Crankshaft Seal Housing to Block
12 N·m
106 lb in

Spark Plugs to the Cylinder Head
18 N·m
13 lb ft

Starter to the Block Bolt
90 N·m
66 lb ft

Tensioner to Tensioner Bracket Nut
54 N·m
40 lb ft

Throttle Body to the Intake Manifold
10 N·m
89 lb in

Thrust Plate to the Balance Shaft Housing
13 N·m
115 lb in

Timing Chain Housing to the Block Bolts/Studs
29 N·m
21 lb ft

Timing Chain Housing to the Camshaft Housings
26 N·m
19 lb ft

Timing Chain Tensioner to Housing
10 N·m
89 lb in

© 2008 General Motors Corporation. All rights reserved.



Chris



hate to burst yer bubble boss... he asked aboot teh ohv... seems you posted specs on teh eco... but i dont know, they could be the same.



Edited 1 time(s). Last edited Wednesday, September 24, 2008 9:54 PM


JBO Stickers! Get yours today!
Re: tourqe specs???
Thursday, September 25, 2008 5:00 PM
Service Information
2002 Chevrolet Cavalier | Unit Repair | Engine | Document ID: 646032


......

Good thing all power plants were used in 02, hence my choice of years.

BUT, if you all don't like it, I will no longer post that kind of stuff up, wouldn't want to piss ya off.

Chris




'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08

Re: tourqe specs???
Sunday, September 28, 2008 10:03 AM
Service Information
1998 Chevrolet Cavalier | Cavalier, Sunfire (VIN J) Service Manual | Engine | Engine Mechanical - 2.2L | Specifications | Document ID: 254936
Flywheel Bolts
75 N·m
55 lb ft




2003 White Cavalier LS Sport Coupe
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search