I cannot find my Haynes manual and need these wires identified. It's the fog light switch(Phase 1 Z/24 if it matters).



Im assuming the black is ground and the solid yellow and yellow/black stripe are constant and switched power, but am unsure which is which. My plan is to wire it up to control the lights for my autometer gauges.



Edited 1 time(s). Last edited Wednesday, April 07, 2010 3:23 PM

Hi Kyle, got a multimeter? Put it to continuity and start playing with two wires at a time. It'll then show you which is going to be your two power wires when the switch is turned on because you'll have continuity. The third wire is ground.




Your car may do 13 sec @ 103 mph, but my car does 146db @ 35 hz.

My multimeter is fried and havent bothered replacing it because i never use it.

Wiring convention would suggest that the yellow is 12v constant and yellow/black is 12v switched.

My Chilton manual doesn't have a fog light schematic.

Got the info i need and here is it for future reference.

Black is Ground, yellow is constant power, yellow/black is your switched power that runs out to the fog lamp relay.

Where do each wires from the switch go? And also, is there a how to, step by step on wiring up the fogs?

im just new to the whole thing, especially when it comes to this relay business.

Anything Guys? That diagram above just confuses me more...

What year is the schematic diagram for??