How To: LD9/Ecotec Boosted PCV System - Page 2 - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: How To: LD9/Ecotec Boosted PCV System
Tuesday, February 03, 2009 5:09 PM
When do you plan on ordering Vince??

Mike, I'm using the Bwoody catch and have good experience with it so far. Only issue is that you have to take it out of the car to determine if it is filled or not. I like that fact that it doesn't have a leak point like others do with the fittings and clear nylon tubing. I am probably going to look for a new one with a view for this new setup though.




Re: How To: LD9/Ecotec Boosted PCV System
Tuesday, February 03, 2009 6:02 PM
probably order soon. id like to get 5 people right off the bat and just order 10. and save shipping.



Re: How To: LD9/Ecotec Boosted PCV System
Tuesday, February 03, 2009 7:14 PM
Name, quantity, email, payment method
--------------------------
1. Vincent Morris, 2, Vink70_99@yahoo.com, paypal
2. Brandon Powell, 2, brandon_20_bp@hotmail.com, paypal



Re: How To: LD9/Ecotec Boosted PCV System
Tuesday, February 03, 2009 9:45 PM
Name, quantity, email, payment method
--------------------------
1. Vincent Morris, 2, Vink70_99@yahoo.com, paypal
2. Brandon Powell, 2, brandon_20_bp@hotmail.com, paypal
3. Scott Kesterke, 2, goaltendersup33@hotmail.com, hookers and blow/possibly paypal




Re: How To: LD9/Ecotec Boosted PCV System
Wednesday, February 04, 2009 7:54 AM
Name, quantity, email, payment method
--------------------------
1. Vincent Morris, 2, Vink70_99@yahoo.com, paypal
2. Brandon Powell, 2, brandon_20_bp@hotmail.com, paypal
3. Scott Kesterke, 2, goaltendersup33@hotmail.com, hookers and blow/possibly paypal
4. David Ingram, 2, greeneyez614@yahoo.com, paypal.

Chris, So if I understand the picture right for us boosted guys, a tube from the pcv hole in the head is not needed correct?

Vince, is the 22.00 for both check valves or 1? Im thinking Im not gonna route a line to my turbo intake, so I may only need 1.

Thx.





Edited 1 time(s). Last edited Wednesday, February 04, 2009 8:04 AM








~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: How To: LD9/Ecotec Boosted PCV System
Wednesday, February 04, 2009 8:02 AM
well talking to pj about this he said our pcv is different, so im wondering i still need 2 valves. im going to try to ask him later today so i can get these coming. or if anyone else talks to him find out please?




Re: How To: LD9/Ecotec Boosted PCV System
Wednesday, February 04, 2009 12:19 PM
Damn, cant edit post twice?

Well I just remembered I have an account with McMaster so i wont need to be in on the GP.

Couple questions, the two red hoses below in the picture, are those 1/2" hoses?



Just wondering because you call for 1/2" check valves on those hoses, but the fitting Brandon has coming out of his oil air seperator looks to be 1/4" barb fitting and its connected to the same hose the 1/2" check valve is on.

Just need that cleared up, thanks











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: How To: LD9/Ecotec Boosted PCV System
Wednesday, February 04, 2009 12:21 PM
I did this on purpose....

1/4" line for the red line. I decided upon a 1/2" check valve because of the fittings, I didn't want the fitting ID size to be an issue so I over-sized to a 1/2" check valve, 1/2" NPT barb fitting with a 1/4" outlet to the line... this way there is no undersized area to deal with.

-Chris-



-Sweetness-
-Turbocharged-
Slowly but surely may some day win this race...
Re: How To: LD9/Ecotec Boosted PCV System
Thursday, February 05, 2009 2:54 PM
do you have to run this if you run the other manifold ?
Re: How To: LD9/Ecotec Boosted PCV System
Saturday, February 07, 2009 6:56 PM
ok say you are using the Saab TD04 turbo and you are connecting the line from the pcv port on the valve cover to the inlet to the turbo will you still need to do this check valve set up?



Re: How To: LD9/Ecotec Boosted PCV System
Sunday, February 08, 2009 9:19 AM
Slowcav, you've misunderstood the how-to. The valve cover is the fresh air inlet, not the PCV outlet. Look over it again my friend.

-Chris-


-Sweetness-
-Turbocharged-
Slowly but surely may some day win this race...

Re: How To: LD9/Ecotec Boosted PCV System
Sunday, February 08, 2009 9:47 AM
i hope pj can figure this out soon for the eco haha. its the last thing i need to get rolling for my car to be ready for the new year.



Re: How To: LD9/Ecotec Boosted PCV System
Sunday, February 08, 2009 10:44 AM
^^^ yeah i hope pj can figure it out too for the ecotec. i'm a bit confused by the diagram since its for the oil air separator on the ld9...



Re: How To: LD9/Ecotec Boosted PCV System
Monday, February 09, 2009 9:24 AM
LAFNGAS wrote:

hey chris, just wanted to bug ya but your checkvalve for the turbo intake side should be opening to the manifold thus allowing air to go through it and creating the vacuum is it not?


This just confused the crap outta me when looking at the picture.

So what's wrong with the diagram Chris posted up?



Re: How To: LD9/Ecotec Boosted PCV System
Monday, February 09, 2009 10:53 AM
Thrice . wrote:

LAFNGAS wrote:

hey chris, just wanted to bug ya but your checkvalve for the turbo intake side should be opening to the manifold thus allowing air to go through it and creating the vacuum is it not?


This just confused the crap outta me when looking at the picture.

So what's wrong with the diagram Chris posted up?


Nothing, Scott was mistaken. The diagram is correct thus far...

-Chris-



-Sweetness-
-Turbocharged-
Slowly but surely may some day win this race...
Re: How To: LD9/Ecotec Boosted PCV System
Monday, February 09, 2009 11:08 AM
ok, i'm not retarded then



Re: How To: LD9/Ecotec Boosted PCV System
Wednesday, February 11, 2009 9:18 PM
SweetnessGT wrote:

Thrice . wrote:

LAFNGAS wrote:

hey chris, just wanted to bug ya but your checkvalve for the turbo intake side should be opening to the manifold thus allowing air to go through it and creating the vacuum is it not?


This just confused the crap outta me when looking at the picture.

So what's wrong with the diagram Chris posted up?


Nothing, Scott was mistaken. The diagram is correct thus far...

-Chris-


yep, the diagram is correct just things didnt click upstairs for a sec




Re: How To: LD9/Ecotec Boosted PCV System
Wednesday, February 11, 2009 9:41 PM
i plan to order these monday, so update the list if you want in on them...



Re: How To: LD9/Ecotec Boosted PCV System
Thursday, February 12, 2009 9:18 AM
Name, quantity, email, payment method
--------------------------
1. Vincent Morris, 2, Vink70_99@yahoo.com, paypal
2. Brandon Powell, 2, brandon_20_bp@hotmail.com, paypal
3. Scott Kesterke, 2, goaltendersup33@hotmail.com, hookers and blow/possibly paypal
4. David Ingram, 2, greeneyez614@yahoo.com, paypal.
5. Sean Friend, 2, massive_guitarist@hotmail.com, paypal



Re: How To: LD9/Ecotec Boosted PCV System
Thursday, February 12, 2009 10:48 AM
Vince- are you going to pm us with the info you need and payment details before you go to order?



Re: How To: LD9/Ecotec Boosted PCV System
Thursday, February 12, 2009 12:45 PM
yeah i will do it all in one shot. and post up when everyone has paid. i might even get to it this weekend. tell you what, my paypal is Vink70_99@yahool.com. ill get a total for the price for 2 of them and add a dollar to each to ship to me then divy them up to the rest of you.

chris you need these too?




Re: How To: LD9/Ecotec Boosted PCV System
Tuesday, February 17, 2009 2:34 PM
K lets get a final confirmed list. im going to be putting the order in tomorrow and need a final list to order them. ill post my paypal later tonight. the way its going to have to happen is, you pay me for the valves first. then another payment to ship them to you. i dont know how else to do it in one payment... if anyone else has a better way, let me know. but like i said. order should go out tomorrow if everyone posts up and can send some money my way.



Re: How To: LD9/Ecotec Boosted PCV System
Tuesday, February 17, 2009 4:36 PM
I'm still in. Let me know how much and when to send it. zip code 49855



Re: How To: LD9/Ecotec Boosted PCV System
Thursday, February 19, 2009 5:58 PM
Name, quantity, email, payment method
--------------------------
1. Vincent Morris, 2, Vink70_99@yahoo.com, paypal
2. Brandon Powell, 2, brandon_20_bp@hotmail.com, paypal
3. Scott Kesterke, 2, goaltendersup33@hotmail.com, hookers and blow/possibly paypal
4. David Ingram, 2, greeneyez614@yahoo.com, paypal.
5. Sean Friend, 2, massive_guitarist@hotmail.com, paypal
6. Yousif Yousif, 2. camel669@hotmail.com, Paypal
Re: How To: LD9/Ecotec Boosted PCV System
Thursday, February 19, 2009 6:09 PM
each fitting is $22.33 us dollars.

does anyone have any problem with me doing $25.00 a piece for them to cover me being the middle man and the paypal fees? if thats a problem let me know.

my plan is do collect the money. make the order, ship them to me. then ship them individually from there.

yes i can ship to canada and i will. once i get them, i will get everyone quotes and go from there, and ship them out to each person, complete with tracking numbers and email confirmation.

so if you can, please Paypal the money to Vink70_99@yahoo.com. with your name, org name, and any other info i need.

FEEL FREE TO PM ME IF YOU HAVE ANY QUESTIONS.



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search