Vulcan Turbo's M62 manifold for the 2.4 - Page 13 - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Vulcan Turbo's M62 manifold for the 2.4
Friday, September 11, 2009 9:55 PM
lol, I could care less, just asking.


http://www.overkillengineeringmotorsports.com/

Re: Vulcan Turbo's M62 manifold for the 2.4
Friday, September 11, 2009 11:52 PM
Actually i put some 5W-30 on the belt.
Re: Vulcan Turbo's M62 manifold for the 2.4
Saturday, September 12, 2009 10:52 AM
I am definitely wanting this...even tho it will most likely be tax return time b4 I could afford one. What are the odds on getting one made with a 2.3 flange? My Z has the 086 head.



Re: Vulcan Turbo's M62 manifold for the 2.4
Saturday, September 12, 2009 10:55 AM
Should be do-able. I talked to Vulcan for a bit a month or 2 back about the quad4



Re: Vulcan Turbo's M62 manifold for the 2.4
Saturday, September 12, 2009 6:56 PM
After seeing the finished product, and seeing the recent vids of the TVS on an eco car...I see some pretty sick combonations in the future.

Yes tone has changed because of the finished product.

I've explained why I hate the LD9 to some people...not that it matters...but I once owned one and had terrible luck with the rod bearings, water pumps, and head gaskets, hence my hatred toward them. I understand a lot of you have had quite good luck with them, instead of waiting for my luck to change I changed motors and haven't looked back. I'm more impressed with the l61 than the ld9, but this is a huge plus for the ld9 s/c crowd. Go get em guys.



---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!


Re: Vulcan Turbo's M62 manifold for the 2.4
Sunday, September 13, 2009 3:07 PM
I wish everyone would stop being so critical of a finished product being made one way or other for this reason or that. Please, let us do what we do best. This isnt our first manifold to be made or first car to ever be worked on. We will make this work, and work well.

Edited 1 time(s). Last edited Sunday, September 13, 2009 3:07 PM
Re: Vulcan Turbo's M62 manifold for the 2.4
Sunday, September 13, 2009 8:59 PM
I was complimenting the semi finished product. Then went to explain some of why I trash talk the ld9. Sorry you misunderstood what I was saying. I've actually sent a couple pm's to Wade expressing some excitement of this project.



---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!


Re: Vulcan Turbo's M62 manifold for the 2.4
Sunday, September 13, 2009 10:17 PM
Skunk - 488whp wrote:

I was complimenting the semi finished product. Then went to explain some of why I trash talk the ld9. Sorry you misunderstood what I was saying. I've actually sent a couple pm's to Wade expressing some excitement of this project.


I am 99% sure Vulcan's comment had nothing to do with anything you said Curt.



FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!

Re: Vulcan Turbo's M62 manifold for the 2.4
Sunday, September 13, 2009 10:28 PM
^^ Yea i wasnt talkin about what he said.
Re: Vulcan Turbo's M62 manifold for the 2.4
Monday, September 14, 2009 1:00 PM
Vulcan Turbo, LLC wrote:

^^ Yea i wasnt talkin about what he said.


any recent progress ?



Re: Vulcan Turbo's M62 manifold for the 2.4
Monday, September 14, 2009 5:06 PM
i heard a rumor...

hope its true.





Familiar Taste of Poison.

Re: Vulcan Turbo's M62 manifold for the 2.4
Monday, September 14, 2009 5:15 PM
z yaaaa wrote:

i heard a rumor...

hope its true.



lol, i really think this manifold coupled with a external water/air intercooler will be the best thing any m62 owner can do to get lower IAT's...use the right water/air ic and you can get very short tubing, prob no more than a foot of it, and good intercooling...also the route of going air/air for those who preffer it or who dont want to spent the additional money to go water/air



Re: Vulcan Turbo's M62 manifold for the 2.4
Monday, September 14, 2009 6:22 PM
shhh, its a few steps closer tonight but unfortunately not done.
Re: Vulcan Turbo's M62 manifold for the 2.4
Thursday, September 17, 2009 8:29 PM
so anything going on? kinda getting a lil impatient



http://www.cardomain.com/ride/2623318



Re: Vulcan Turbo's M62 manifold for the 2.4
Friday, September 18, 2009 10:55 AM
jared methe wrote:

so anything going on? kinda getting a lil impatient


arent we all :p



Re: Vulcan Turbo's M62 manifold for the 2.4
Friday, September 18, 2009 2:06 PM
well i had a buyer for my m45 kit and since i only have my cav as my daily driver i couldnt take it off until i get the new one. and now he might want his money back since this is taking so long. so kinda have some reason to be inpatient



http://www.cardomain.com/ride/2623318



Re: Vulcan Turbo's M62 manifold for the 2.4
Friday, September 18, 2009 2:15 PM
jared methe wrote:

well i had a buyer for my m45 kit and since i only have my cav as my daily driver i couldnt take it off until i get the new one. and now he might want his money back since this is taking so long. so kinda have some reason to be inpatient


YOu cant put a stock intake back on and keep driving?? If I had a sale and this was delaying it I would rather go back to stock than loose the sale.



Re: Vulcan Turbo's M62 manifold for the 2.4
Friday, September 18, 2009 2:17 PM
well i kept hearing oh another week or two from this thread which i kept telling that guy but i heard that over a month ago and now its starting to get to me.



http://www.cardomain.com/ride/2623318



Re: Vulcan Turbo's M62 manifold for the 2.4
Friday, September 18, 2009 5:11 PM
id go back stock for a month if thats what it takes to keep the sale..



12.33 @ 111.67 mph [Oct 2009]
Dyno'd on 08/02/09 - Mustang Dyno:
327.6 WHP 333.6 WTQ [10.1 AFR]
Re: Vulcan Turbo's M62 manifold for the 2.4
Friday, September 18, 2009 6:03 PM
evilmonkitar wrote:

id go back stock for a month if thats what it takes to keep the sale..


ya. ive been runnin n/a for over a month now. it's slow....


my carDomain updated 8/10/09 Forged and no boost


Re: Vulcan Turbo's M62 manifold for the 2.4
Friday, September 18, 2009 7:08 PM
ha yea i would go nuts if i went back stock..



12.33 @ 111.67 mph [Oct 2009]
Dyno'd on 08/02/09 - Mustang Dyno:
327.6 WHP 333.6 WTQ [10.1 AFR]

Re: Vulcan Turbo's M62 manifold for the 2.4
Friday, September 18, 2009 7:14 PM
New thread started to bring us back to Page 1, check posting "continued: vulcan turbos MP62 intake manifold LD9"
Re: Vulcan Turbo's M62 manifold for the 2.4
Monday, April 20, 2015 5:22 AM
does anyone have one of these they are not using
Re: Vulcan Turbo's M62 manifold for the 2.4
Monday, June 15, 2015 5:42 PM
I have this original one.



FU Tuning



Re: Vulcan Turbo's M62 manifold for the 2.4
Thursday, July 02, 2015 8:18 PM
would you be willing to sell this


<img src="http://img46.imageshack.us/img46/227/cave10wf.gif" />
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search