lol, well dave, i was talking with the welder friend, i can just get some straight tubing and have a 1/4 npt bushing/collar welded in so that would work just fine imo
Damn, oh well. Looks like I'll have to come up with something.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Sorry for the delay guys,I'm totally swamped with work and don't have much time for the hobby stuff right now. I'm pretty sure the heater hoses are 3/4". I could make up a few Tee's if your not in to much of a hurry for them. Probably next weekend before I could get to them. I'll just turn them on the lathe and drill and tap for 1/4" pipe thread so you can use a barbed or pipe to AN fitting,depending on what you want to use for hose to the turbo.
Haven't had time to get under the car yet but here's a couple more pic's.
"The FACTS are always subject to CHANGE once the TRUTH is applied"
"In the entire history of man the only stupid questions are the ones that don't get asked"
Thanks A LOT Gary. Yea If I could get two Tee's from ya. Ill pay you for your troubles
Im sure Scott is interested as well.
No hurry though, whenever you get to them.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
i gotta figure something out lol
Bump
Gary, get a chance to make any T's yet?
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Thanks Gary for the T's!!
Question, out of these two hoses, which line is for the feed and which one is used for the return? Is the hose coming from the head the feed, and the one coming from the thermostat housing the return?
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
Nice Dave! Didnt know your turbo was water cooled as well.
Mike, that pic is Gary's. Mine isn't water cooled yet. Doing that once I take all my turbo stuff off soon. Still collecting parts.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
I have a question, I bought the heater tee off Jason but I cant figure out which heater line I use to install tee. The one on the firewall close to driver side or passenger side??
The other tee is connected in front of the motor on big radiator hose.
instagram: peru_stylez
How do I go about purchasing some of those cool heater core T's for my turbo? PM me! Thanks!