M45 Kit Idler pulley - Page 2 - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: M45 Kit Idler pulley
Friday, March 05, 2010 12:13 PM
ok..

I guess when I was running 13.7's it was not working then right?

or for the 100K I had it on...


Done. No more input from me for anything.

Chris




'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08


Re: M45 Kit Idler pulley
Tuesday, March 16, 2010 12:32 PM
Just an update. The Duralast pulley has given me no issues after 4k miles.


Heavy ass N-body
Re: M45 Kit Idler pulley
Tuesday, March 16, 2010 2:49 PM
does it fit just fine on the bracket?



http://www.cardomain.com/ride/2623318



Re: M45 Kit Idler pulley
Tuesday, March 16, 2010 2:51 PM
because my idler is off at the moment and i should just put a new bearing and pulley on now if this is an exact fit.



http://www.cardomain.com/ride/2623318



Re: M45 Kit Idler pulley
Wednesday, March 17, 2010 7:02 AM
Bolts right up into the proper location. It is exactly the same width of the belt so a lot thinner than the factory pulley. I wouldn't replace it unless you need to.


Heavy ass N-body
Re: M45 Kit Idler pulley
Wednesday, March 17, 2010 9:12 AM
Well i bought one to see how close it is for fitment. If it fits good i might as well change it now.



http://www.cardomain.com/ride/2623318



Re: M45 Kit Idler pulley
Friday, March 19, 2010 1:16 PM
My pulley is definitely gone to hell. I might go buy this and try it out....



-----------------------------------------------------------------------

-----------------------------------------------------------------------
- Sold my beloved J in April 2010 -
Re: M45 Kit Idler pulley
Saturday, March 20, 2010 2:31 PM
Well I went ahead and bought it and put it on today. I searched through all of dayco's idler pulleys and could not find the stocker for sale to the public.

The new pulley bearing ID is a standard dimension that fits perfectly on the shaft (17mm). The stock pulley is 55mm in diameter, whereas the new one is 63mm. This concerned me at first since a small diamater change in a pulley can make or break your belt length, but it caused no issues. The new duralast (made by dayco) pulley is also the width (if not a hair smaller) of the belt. Due to the thinner bearing thickness, to properly bolt down the pulley (so it's not loose on the shaft) and to properly line it up with the belt, you will need to put a 2mm (est.) washer/shim behind the pulley. Besides that, it seems to be working just fine after a trip around the block.

It seems that the stock pulley bearing is held in the pulley by a circlip, and over time the ID of the pulley and depth of the circlip groove has caused it to be loose. I don't think the bearing was originally pressed into the pulley when it should have been, and the circlip groove should have been a tighter tolerance.



-----------------------------------------------------------------------

-----------------------------------------------------------------------
- Sold my beloved J in April 2010 -
Re: M45 Kit Idler pulley
Saturday, March 20, 2010 5:48 PM
I kinda figured alignment would vary from car to car with how narrow that pulley is. I got lucky and mine lined up perfecting with no spacers.


Heavy ass N-body
Re: M45 Kit Idler pulley
Monday, April 08, 2013 1:18 PM
Taetsch Z-24 wrote:
Quote:

THIS is a bearing only, it replaces the whole idler pulley, and its alittle biger, works GREAT..

NSK
6403-2RS1/C3


Chris



IF I HAVE TO DIG THIS OUT ONE MORE TIME................

Chris


I have a 100% BAD Idler Pulley Bearing.

This seems like what you are refering to, but they don't list the "/C3". Could you please tell me if you think this is the correct one?

6403-2RS Sealed Bearing 17x62x17 Ball Bearings





Supercharged 2002 Chevrolet Cavalier Z24
Re: M45 Kit Idler pulley
Monday, April 08, 2013 1:19 PM






Supercharged 2002 Chevrolet Cavalier Z24

Re: M45 Kit Idler pulley
Tuesday, April 09, 2013 6:06 AM
That is the same bearing that was on my SC kit when I bought it from Taetsch Z-24




Jason
99 Z24

LG0/LD9 for Life
10 Year Bash Veteren
Re: M45 Kit Idler pulley
Tuesday, April 09, 2013 12:34 PM
wait what?! i thought i had chris' kit?

so glad i got a NOS pulley/bracket with my kit. how long do they usually last?



It's nice to be injected but I love being blown.
Re: M45 Kit Idler pulley
Tuesday, April 09, 2013 12:41 PM
-Z Yaaaa- wrote:wait what?! i thought i had chris' kit?

so glad i got a NOS pulley/bracket with my kit. how long do they usually last?


I am pretty sure Chris had more than 1 supercharger kit




Jason
99 Z24

LG0/LD9 for Life
10 Year Bash Veteren
Re: M45 Kit Idler pulley
Tuesday, April 09, 2013 7:16 PM
-Z Yaaaa- wrote:wait what?! i thought i had chris' kit?

so glad i got a NOS pulley/bracket with my kit. how long do they usually last?


My blower was installed at about 53,000 miles.

Car has 126,xxx now, so I'm going to say about 70,000 miles?

Luckily I have a BRAND NEW Supercharger Kit in my basement, so I swiped the idler pulley from it,

but would like to have a couple extra ones on the shelf here...





Supercharged 2002 Chevrolet Cavalier Z24
Re: M45 Kit Idler pulley
Wednesday, April 10, 2013 8:45 AM
Darren and a friend and I installed a bearing into a GMSC idler pulley this weekend for a member who got his bearing from a local bearing shop. Fit right in, sat under the circlip properly and functioned great.

I told him that he should post up the part # and company so that others may share in this joy.

-Chris-



-Sweetness-
-Turbocharged-
Slowly but surely may some day win this race...
Re: M45 Kit Idler pulley
Wednesday, April 10, 2013 10:22 AM
hmm i should be good then. although, i did put around 8000 miles on my m45 in about 3 months last year LOL

what really sucks is down the road when you gotta rebuild the BLOWER itself. thats what im doing right now. after i finally got the right case bearings bought and got the old ones out (what a job that was) its been smooth sailing. already got the snout completely rebuilt, that was easy as pie. just in the process of polishing it back out now. good lord it got nasty... lol



It's nice to be injected but I love being blown.
Re: M45 Kit Idler pulley
Wednesday, April 10, 2013 10:48 AM
Re: M45 Kit Idler pulley
Sunday, May 12, 2013 8:14 PM
hmm im gonna look into that dsm pulley, mine needs one too.
Re: M45 Kit Idler pulley
Wednesday, May 28, 2014 3:24 PM
My buddy at Napa ordered me one using the number off the pulley. I will have it Saturday.



FU Tuning



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search