Product Review: O.E.M. phenolic m62 spacer - Page 2 - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Product Review: O.E.M. phenolic m62 spacer
Wednesday, March 03, 2010 10:35 AM
Haven't been a big fan of Marks for a while now, but it looks like he is starting to come back around!

Mark do you have the ability to make this any thicker?




Re: Product Review: O.E.M. phenolic m62 spacer
Wednesday, March 03, 2010 10:42 AM
The one Jeff tested was 1/8in thick. If i remember form his other post he can get them made 3/16-1/4in.


Save your money. It might be worth something someday.

Re: Product Review: O.E.M. phenolic m62 spacer
Wednesday, March 03, 2010 10:48 AM
97cavie24ls() wrote:


for me , only fix to clear would be to completely cut down the map area , weld the hole in and blend it like it was never there , in order to use anything that lifts the s/c up

and living in hellizona , it would be nice in the summer time to drop the temp a few degrees


Well I gotta agree wiht this old man that living in AZ a spacer will make a lot of difference



Re: Product Review: O.E.M. phenolic m62 spacer
Friday, March 05, 2010 9:51 AM
jucsbst- the venom its made out of aluninum. and like i said, it does get so hot you cant touch it.

i wish wade could have tried this on the vulcan setup, it could have helped that much more. although... the intercooler set-up did maintain a very nice IAT. but still, after awhile it would get warmed up.



Re: Product Review: O.E.M. phenolic m62 spacer
Friday, March 05, 2010 11:33 AM
well i will be trying it brad i got tracking today for my intercooler setup from brian finally and if i have any room i am gonna get a head to manifold flange to.....



http://www.cardomain.com/ride/2623318



Re: Product Review: O.E.M. phenolic m62 spacer
Friday, March 05, 2010 11:54 AM
Jared keep us posted, I'm not too far behind you!



Re: Product Review: O.E.M. phenolic m62 spacer
Friday, March 05, 2010 12:12 PM
Going to be making a spacer for the head in a week or two. Keep u guys posted.

Mark


http://www.overkillengineeringmotorsports.com/
Re: Product Review: O.E.M. phenolic m62 spacer
Friday, March 05, 2010 12:44 PM
dcampbellz24 wrote:

Jared keep us posted, I'm not too far behind you!

why we have the same build huh?



http://www.cardomain.com/ride/2623318



Re: Product Review: O.E.M. phenolic m62 spacer
Friday, March 05, 2010 3:12 PM
jerrod- from what i remember its going to be close but i think a 1/4" spacer should fit.

im glad you are actually getting the parts. the setup is too nice for only one car to have.



Re: Product Review: O.E.M. phenolic m62 spacer
Friday, March 05, 2010 3:35 PM
from what i just heard from brian is that dan campbell just ordered one last week also



http://www.cardomain.com/ride/2623318



Re: Product Review: O.E.M. phenolic m62 spacer
Saturday, March 06, 2010 10:20 AM
actually two weeks ago Our builds look pretty similar though. I was suprised that I'm only number 4 on the manifold.




Re: Product Review: O.E.M. phenolic m62 spacer
Saturday, March 06, 2010 9:57 PM
yeah just be prepared to twst your patients i paid in july and am getting everything this week



http://www.cardomain.com/ride/2623318



Re: Product Review: O.E.M. phenolic m62 spacer
Tuesday, March 09, 2010 12:07 PM
looks good, but they have to make the spacer the same as the actual GM gasket...that's whats they are missing, i brought this up in the other thread...once they do that, i dont see a reason why this wouldnt be a good buy, hell i would get one once they manage to set that up...also ZZP already makes a phenolic for the head to intake manifold, its the same as the LSJ intake manifold gasket, which is what we run right now anyway...cost 99.99...



Re: Product Review: O.E.M. phenolic m62 spacer
Tuesday, March 09, 2010 12:09 PM
ps. OEM if you need a stock GM gasket for the m62 to make a identical phenolic, let me know i have a spare i can send you if you cover shipping...



Re: Product Review: O.E.M. phenolic m62 spacer
Tuesday, March 09, 2010 1:17 PM
Jn2 wrote:

looks good, but they have to make the spacer the same as the actual GM gasket...that's whats they are missing, i brought this up in the other thread...once they do that, i dont see a reason why this wouldnt be a good buy, hell i would get one once they manage to set that ...



I've had not a single problem with the way the spacer is made now, I'm making the same boost before and after the install of the spacer. I also already have a zzp spacer that I'm going to get to testing if I have time this weekend.






Re: Product Review: O.E.M. phenolic m62 spacer
Tuesday, March 09, 2010 6:25 PM
The new spacer is the same specs as the blower. We enlarged it.


http://www.overkillengineeringmotorsports.com/
Re: Product Review: O.E.M. phenolic m62 spacer
Tuesday, March 09, 2010 7:14 PM
i want a blower


Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla

Re: Product Review: O.E.M. phenolic m62 spacer
Wednesday, March 10, 2010 10:18 AM
We will have our head spacer done in about 1 week or so.


http://www.overkillengineeringmotorsports.com/
Re: Product Review: O.E.M. phenolic m62 spacer
Wednesday, March 10, 2010 2:15 PM
When you make them I would suggest that you make the revision for the egr on the spacer. That can save some people trouble when doing the install. Heres some pictures of what i am talking about.

Stock gasket.



Stock gasket modified.



Modified gasket on the head, im not sure if the rtv will be nessessary if you will be supplying two paper gaskets.



Will you include longer bolts with these?

Sorry for the huge pictures.





Save your money. It might be worth something someday.

Re: Product Review: O.E.M. phenolic m62 spacer
Thursday, March 11, 2010 4:46 AM
Thanks for posting that pic up Bryan, I can't find my install cd that came with the gmpp kit to send the pdf to oem






Re: Product Review: O.E.M. phenolic m62 spacer
Thursday, March 11, 2010 7:07 AM
They will be 1/8" thick as well. For the gasket. the modified EGR port is just for the 2.2?

Mark-OEm


http://www.overkillengineeringmotorsports.com/

Re: Product Review: O.E.M. phenolic m62 spacer
Thursday, March 11, 2010 7:12 AM
Can either one of you guys scan and e-mail me the gasket. My local store does not carry it so I would have to buy it from the dealer.

Mark


http://www.overkillengineeringmotorsports.com/
Re: Product Review: O.E.M. phenolic m62 spacer
Thursday, March 11, 2010 4:20 PM
The gasket is like 11 bucks from the dealer Mark. I like where this is going. I might need to add it to my blower build.



Re: Product Review: O.E.M. phenolic m62 spacer
Thursday, March 11, 2010 4:43 PM
OEM wrote:

They will be 1/8" thick as well. For the gasket. the modified EGR port is just for the 2.2?

Mark-OEm


This is for the 02-05 eco s/c kits only I believe.




Save your money. It might be worth something someday.

Re: Product Review: O.E.M. phenolic m62 spacer
Monday, March 15, 2010 12:14 PM
this could be used on the 2.0s as well?

im game this sounds intresting



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search