its one those new hybrid manni's 1/2 us 1/2 china made
Lucy, you got some explaining to do... Lol
They never claimed that the turbo manifold was US stuff. Just the intake.
Blackbird not true.... Directly from their site..
High Quality T3 Turbo Exhaust Manifold.
Available for the:
2002-2005 Chevrolet Cavalier/Pontiac Sunfire 2.2L Ecotec
2005-2010 Chevrolet Cobalt/Pontiac G5 2.2/2.4L Ecotec
2005-2007 Chevrolet Cobalt 2.0L (LSJ) Ecotec
Features:
Stainless Steel Primaries (1.5" Schedule 10) Actual ID is 1.68"
1/2" Thick Exhaust Flange
Exhaust flange is stress cut after welding
Exhaust flange is CNC fly cut after welding for a perfect seal
Innovative CNC T3 Flange for the highest flow possible
T3 Flange is pre tapped for a quick install of 3/8" X 16 bolts
T3 Flange faces downward at a 45 degree angle
Professionally TIG Welded
CNC machined sub components
Made in the USA!
Like i said before, despite the discrepancies over the origin, the manifold still looks amazing, and once I have it port matched and wastegate flange welded on, it's gonna look great on my car!
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
If you wanna get picky about it, it does say made in the USA but does not dictate that the raw parts are made in the USA.
Turbo Tech Racing wrote:OverKill All The Way!!!!! wrote:I love that its made in the USA. Awesome work Aaron.
Mark
Thanks! This is the best thing! USA made (ALL materials are also), supports our economy!
:p. But like I said, still an amazing piece! I will post pics when I get it back from my machinist this weekend. Just dropped it off tonite. It will be port matched and the transitions from the runners to flange are going to be smoothed out and blended, along with adding the external wastegate flange.
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
Roofy wrote:Turbo Tech Racing wrote:OverKill All The Way!!!!! wrote:I love that its made in the USA. Awesome work Aaron.
Mark
Thanks! This is the best thing! USA made (ALL materials are also), supports our economy!
:p. But like I said, still an amazing piece! I will post pics when I get it back from my machinist this weekend. Just dropped it off tonite. It will be port matched and the transitions from the runners to flange are going to be smoothed out and blended, along with adding the external wastegate flange.
Ouch..nevermind.....
It does look like a quality piece though. Just because parts are made in china doesnt mean its crap. China can make great parts and crappy parts. Its all up to the buyer.
Guys we
MAKE these in the USA, the only purchsed parts are those 90* elbows and T's. We dont cast/forge here... No USA made company makes these (that we know of). Anywhere you look these will be made over seas. Every manifold that uses these (which most do) can state this too...
Flanges, machining, cutting, TIG welding is ALL USA done, here at TTR.
-Aaron
www.TurboTechRacing.com
Performance Parts For Cavalier, Sunfire, Cobalts and More!!!
Chinese steel = American steel bought at a HUGE discount, and then sold back to us........ with CHINA printed on it.
Nice looking pieces Aaron!
SPD RCR Z -
'02 Z24 420whp
SLO GOAT -
'04 GTO 305whp
W41 BOI -
'78 Buick Opel Isuzu W41 Swap