Suggestion on injectors - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Suggestion on injectors
Wednesday, March 06, 2013 11:36 AM
I am running a Garrett GT3071R and will be pushing close to 20psi. Was curious as to what you guys suggested for injectors (brand/size)





Re: Suggestion on injectors
Wednesday, March 06, 2013 12:25 PM
Injectors aren't sized by the turbo used or the expected boost pressure, unfortunately.

They are sized based on horsepower output at the crank / amount of injectors used... x amount of horsepower will require y amount of fuel flow divided by z amount of injectors.

With that said - what is your horsepower goal? Will you be running an upgraded pump and harness? Stock sized fuel lines?

-Chris-


-Sweetness-
-Turbocharged-
Slowly but surely may some day win this race...
Re: Suggestion on injectors
Wednesday, March 06, 2013 1:25 PM
Whp goal would be 300-350 I am guessing. I put down 215 with 8psi. My current injectors are currently 36# The car has a Racetronix 255 pump with stock lines



Re: Suggestion on injectors
Wednesday, March 06, 2013 2:39 PM
Grab a set of ID750 they will be more then plenty for you and give you room to grow


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: Suggestion on injectors
Wednesday, March 06, 2013 2:44 PM
MillerBilt Racing wrote:

Grab a set of ID750 they will be more then plenty for you and give you room to grow


Something like these?



Re: Suggestion on injectors
Wednesday, March 06, 2013 2:47 PM
Go thru t1racedevelopment they are cheaper


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: Suggestion on injectors
Wednesday, March 06, 2013 2:55 PM
Thanks, injectors are kind of foreign to me, but hopefully I can get the right ones.



Re: Suggestion on injectors
Wednesday, March 06, 2013 3:01 PM
With the id725 at wot they would be roughly be 850cc and if you are running 20psi then they would be roughly 950cc more then enough for now and a lot of room to grow I have the ID1000 and will have them up to about 1500cc at 90psi 60 base with 30psi boost = 90psi boost referenced setup


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: Suggestion on injectors
Wednesday, March 06, 2013 3:04 PM
Right on...been reading a lot, and real life examples are always best! Thanks!




Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search