sheet metal manifold with reflash... - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
sheet metal manifold with reflash...
Thursday, March 14, 2013 10:17 AM
So im trying to lean things out using supporting mods for the reflash. I was considering using a saab aluminum manifold with a ls1 tb. Now i have a chance to get a sheet metal intake mani on the cheap so im just wondering if anyone has tried a sheet metal intake with the reflash and what did it do for you

Re: sheet metal manifold with reflash...
Thursday, March 14, 2013 11:18 AM
Turn the boost up that leans it out quick



Re: sheet metal manifold with reflash...
Thursday, March 14, 2013 3:00 PM
BuiltNBoosted wrote:Turn the boost up that leans it out quick


exactly what I did, never had a problem when i was running the reflash
Re: sheet metal manifold with reflash...
Thursday, March 14, 2013 3:14 PM
I did that, im running 14psi and still seeing low 11s... like 11.2-11.4 max. I wouldnt mind something more in the area of 11.8-12 max at a lower boost setting... say 10psi.
Re: sheet metal manifold with reflash...
Thursday, March 14, 2013 7:29 PM
What are you running for a turbo? I did a upgraded my high pressure saab turbo and around 10psi it put everything inline
Re: sheet metal manifold with reflash...
Thursday, March 14, 2013 7:48 PM
i just changed my name wrote:I did that, im running 14psi and still seeing low 11s... like 11.2-11.4 max. I wouldnt mind something more in the area of 11.8-12 max at a lower boost setting... say 10psi.


I would stick with where you are at... Thats pretty safe AFR for sure. I mean 11.7 would be really nice but 11.2 is quite safe.



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search