m45 idler bracket - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
m45 idler bracket
Tuesday, November 05, 2013 12:22 AM
Does anyone have one for sale? I have a 2001 z24 and have everything but this bracket. Has anyone made one. I am considering that too since thats all thats holding me back. Maybe even some dimensions, pulley size...etc...thanks

Re: m45 idler bracket
Tuesday, December 10, 2013 12:15 AM
Anyone
Re: m45 idler bracket
Monday, December 16, 2013 8:28 AM
I do not think anyone makes them. I was thinking about coping it, and reselling some, but I never got around to it.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: m45 idler bracket
Monday, December 16, 2013 2:14 PM
mike ill send you mine if you would like to copy it. hell ill send the pcv baffle, too.... all id ask is a discount on them for future purchase!!!!



RIP silver car. You will be missed.
Re: m45 idler bracket
Monday, February 03, 2014 7:17 PM
i would like the original sc pcv baffle!



Re: m45 idler bracket
Tuesday, February 04, 2014 1:45 AM
Make reproductions of them both Mike!



Re: m45 idler bracket
Tuesday, February 04, 2014 7:02 AM
Brad, I can copy both if you want to ship them out to me.

Not sure why my subscription to this thread never emailed me...





Edited 1 time(s). Last edited Tuesday, February 04, 2014 7:03 AM

PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: m45 idler bracket
Friday, February 07, 2014 5:40 PM
please Brad!!!!!



Re: m45 idler bracket
Saturday, February 22, 2014 5:18 PM
i probably could if brad isnt going to, my kit is not in use.
Re: m45 idler bracket
Thursday, March 13, 2014 12:32 PM
I've got one for sale if you really need it badly.

It's $6k.

I'll leave it to you to strip off the other bits that are attached to it.




Re: m45 idler bracket
Thursday, March 13, 2014 1:06 PM
I hope to have Brads in my hand soon to copy.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

Re: m45 idler bracket
Friday, March 14, 2014 3:40 PM
please design it differently than OEM did. straight an fittings are a bitch.



RIP silver car. You will be missed.
Re: m45 idler bracket
Monday, March 17, 2014 3:42 AM
They do make 90 degree an fittings....wouldn't that clear the charger?



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: m45 idler bracket
Tuesday, March 18, 2014 8:39 PM
Yes, as long as it does not stick out more then two/one and a half inches.


'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08

Re: m45 idler bracket
Wednesday, March 19, 2014 7:26 AM
Taetsch Z-24 wrote:Yes, as long as it does not stick out more then two/one and a half inches.

shouldn't be an issue at all.



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: m45 idler bracket
Wednesday, March 19, 2014 10:16 AM
The issue with the plate on mine now is it only has the barbs on it, but it works.

In three-four months when I am putting my 2.4 in I could get pictures for you if you wanted.




'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08

Re: m45 idler bracket
Wednesday, March 19, 2014 11:50 AM
Something like this....
http://www.summitracing.com/parts/sum-220712-b

This into the plate.
http://www.summitracing.com/parts/sum-220165b/overview/





PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: m45 idler bracket
Wednesday, March 19, 2014 5:03 PM
no way those would fit... i have a picture of how close it is somewhere....



RIP silver car. You will be missed.
Re: m45 idler bracket
Wednesday, March 19, 2014 5:08 PM
more something like this maybe?




Re: m45 idler bracket
Wednesday, March 19, 2014 5:10 PM
this is not the pic i wanted to show but i cannot seem to locate the damn thing... anyways, the blower squeezed the two hoses nearly shut right there where they came off the fitting.






RIP silver car. You will be missed.
Re: m45 idler bracket
Thursday, March 20, 2014 3:28 AM
Magik1109 wrote:more something like this maybe?

NPT to AN should work, but would require a thicker plate for mounting.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

Re: m45 idler bracket
Thursday, March 20, 2014 10:44 AM
....damn twin cams. Quad4 Is what I should have stuck with. junk fwd cars.


/rant


'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08

Re: m45 idler bracket
Monday, November 17, 2014 1:31 PM
Did anyone make a copy as I am in need of one right now?
Re: m45 idler bracket
Monday, November 17, 2014 2:13 PM
I drew one up. Ended up being not worth my time to get any made. Everyone I talked to about manufacturing it wanted $300-400. I did't go any further than that.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search