Will brown tops fit perfectly in a 01 z with a rk sport fuel rail? I know ill have to wire up new plugs. The reason i asked is because earlier today I installed these and after I fired it up i think fuel was comming out of the intake holes where they sit. Are the brown tops shorter than the stock z24's? I dont yet have my fmu so im running off my stock fpr could it be that they are flooding the motor so bad its pushing fuel out. Someone help me out. Thanks.

They're the same size. Make sure they're properly installed, and make doubly sure you've got o-rings on the feed and return lines going into your fuel rail. I'd also check the o-rings on the injectors themselves, to make sure nothing has gone awry there.



- Interior FAQ -
J-Body of Michigan -

Just buy new O-Rings, $5 for all 8 and takes not but 5 minutes to replace before installing the injectors.

You shouldn't be pushing fuel out at any PSI that the pump can push out, I'd say your o-rings are bad.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Whats the part #

Just go to autozone and ask for O-Rings for the 87-88 2.3L Ford Turbo Coupe.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Thanks. I dont think there is a o ring where the return line goes into the bottom of the fpr should there be, hate to sound like a noob but he boy that owned this car was GHETTO!!!! Dont know if he forgot it or not.

i sent you an email adam


this is my last post for the next 4 months ugg