Turbos that will fit - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Turbos that will fit
Sunday, February 13, 2005 7:55 PM
I'm getting a turbo manifold that had a garrett m24 turbo on it. I was wondering if you guys know which garrett turbo flanges will also fit? I think the T25 will also fit but i'm not sure. Any of you guys happen to know?

Re: Turbos that will fit
Sunday, February 13, 2005 11:33 PM
If i'm not mistaken, "m24" is a casting number. It doesn't imply any information as to trim or style of the turbo. I'd check with a reputable turbo shop/dealer.


<br>
<img src="http://home.nycap.rr.com/xenox/jbody/jbody_shocker.jpg">
Re: Turbos that will fit
Monday, February 14, 2005 3:33 AM
My friedn, who has owned an Eagle Talon for years said the "m24" looks like the stock T25 that was on his talon. So i'll just go with the T25 I think. IT looks like all of the garrett turbos have the same flange style.
Re: Turbos that will fit
Monday, February 14, 2005 8:47 AM
Easier solution than guessing: Measure the flange and report back and we can tell you what flange it is.


<br>
<img src="http://home.nycap.rr.com/xenox/jbody/jbody_shocker.jpg">
Re: Turbos that will fit
Wednesday, March 16, 2005 7:01 PM
ok my flange on the turbo measures (from edge to edge) 3 5/8" long x 2.5" wide. It looks like a T3 flange but i'm not sure. If u need other measurements let me know.
Re: Turbos that will fit
Wednesday, March 16, 2005 7:40 PM
^^CORRECTION^^ those r the measurements on my manifold, not the turbo.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search