2.4 Intake Mnaifold question - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
2.4 Intake Mnaifold question
Wednesday, March 16, 2005 2:29 PM
A t how many lbs of boost will the 2.4 mani crack since it is plastic i believe?





Re: 2.4 Intake Mnaifold question
Wednesday, March 16, 2005 2:31 PM
A LOT, I don't think you have to worry about that, it would probably take a good 100 PSI to make that thing burst.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: 2.4 Intake Mnaifold question
Wednesday, March 16, 2005 2:36 PM
BTW, that's 100 PSI plugging the intake holes and just pressurizing the manifold. I'm sure it could stand more than that, its pretty thick plastic.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: 2.4 Intake Mnaifold question
Saturday, March 19, 2005 5:03 PM
THANKS you known people who have boosted on there 24 mani




Re: 2.4 Intake Mnaifold question
Saturday, March 19, 2005 5:20 PM
Z242QUICK wrote:THANKS you known people who have boosted on there 24 mani


Lots of people have used the stock IM for boosting 2.4's, and I've never heard of anyone cracking it. It's not really an issue.


15.3 @ 89.97mph, 14's on the way?

For Sale:
'01 SFGT springs $50CAN
Getrag '00-'02 2.4 8000kms $800
Re: 2.4 Intake Mnaifold question
Saturday, March 19, 2005 9:22 PM
I boost on my 2000 z24, at 6-9psi depending how I set up for winter or summer, Manifold has had no problems yet


HP Tuners | Garrett T3/T04B | 2.5" Charge Pipes | 2.5" Downpipe | 650 Injectors | HO Manifold | Addco front/rear | Motor Mounts | HKS SSQV | Spec stage 3 | AEM UEGO Wideband | Team Green LSD | FMIC | 2.3 cams | 2.3 oil pump swap | 280WHP | Now ECOTECED

Re: 2.4 Intake Mnaifold question
Sunday, March 20, 2005 9:44 AM
i had told me some horror stories but thatnks guys




Re: 2.4 Intake Mnaifold question
Sunday, March 20, 2005 1:10 PM
Whoever told you those horror stories lied.



- Interior FAQ -
J-Body of Michigan -
Re: 2.4 Intake Mnaifold question
Sunday, March 20, 2005 1:22 PM
It's those metal ones and the nawwss you got to worry about. You will blow the welds on your mani.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search