Need power source for Safc II plz help - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Need power source for Safc II plz help
Sunday, March 27, 2005 7:28 PM
hey sup im installing my safc II in my car i have everything all hooked up besides the power wire, everything is done at the pcm so i need some help as to what wire on what connector would be good to get power from, also i was told to get power from the abs fuse but thats on the other side of the car and my abs doesn't work right now anyways so i need some other means to power this unit

any help would be great

Thanks





Re: Need power source for Safc II plz help
Sunday, March 27, 2005 7:37 PM
any of the red or orange wires going into the fuse panel are power wires. red is constant hot orange is ignition hot. you only have 50 wires to choose from so choose carefully



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Re: Need power source for Safc II plz help
Sunday, March 27, 2005 7:39 PM
Get your power source from the pcm .Thats how i hooked up my s-afc.I think its the orange wire on the blue connector.


Peter
'06 Cobalt ss/sc W/G85 Package
Gm Stage II W/2.79" Pulley
K&N Drop In Filter
Custom Magnaflow Dual Exhaust

Re: Need power source for Safc II plz help
Sunday, March 27, 2005 7:44 PM
does anyone know the number of the wire on the connector?

i dont wanna hook into the wrong one know sense i think there a few orange wires




Re: Need power source for Safc II plz help
Sunday, March 27, 2005 7:46 PM
Connector 1 (Blue)
Pin 19
Or Pin 20





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: Need power source for Safc II plz help
Sunday, March 27, 2005 7:47 PM
BTW, those wires are pink and orange, respectively.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: Need power source for Safc II plz help
Sunday, March 27, 2005 7:55 PM
im not sure if thats right for my pcm as i have a 98 and your 00 they are completely diff

put if you looked at the 97-98 pcm diagram and came to that conclusion please let me know

thanks




Re: Need power source for Safc II plz help
Sunday, March 27, 2005 7:56 PM
ahh just looked your right

thanks a bunch




Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search