BM Shiftplus Install With Pictures #70380 - Transmission Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
BM Shiftplus Install With Pictures #70380
Tuesday, September 30, 2003 4:13 PM
Well people seem to still have alot of problems with installing the ShiftPlus.... why i don't know so i went outside and i took pictures, the directions are below and pictures, u don't really even need the install directions if u look at the pictures, also if u can 't install it after this post then u really need to take your car to a professional,also the connectors used below did not come with the shift kit, these are called tap splices, which i got from home depot. so u now have everything lets hope its all u need.

TO INSTALL SHIFT KIT #70380 AT TRANNY... 2 MINUTE INSTALL: this install was done on a 98 2.2l 4 speed auto, this connector is found in the front of the transmission to the left of the battery, and to the right of the header, it is gray and circular, it is about 6 inches down from the red tranny vent plug, thats says trans, it is 2 inches in diameter, the wires u are connecting is the black wire to the lt blue with white stripe, now the other red wire you want to install to is the red wire with black stripe this wire is directly underneath the light blue one, not the one to the right of it, which is another red with black stripe wire, which has a dark blue wire underneath, look at the connector with the white arrow at 180 degrees, any problems let me know, i get no engine lights, and my ets off light doesn't come on like some people have had problems with stage II.








Edited 2 time(s). Last edited Thursday, December 17, 2009 2:06 PM

Its not how fast your car goes....its how much nerve the driver has to push it that fast.

Post Edited (03-06-06 5:08 AM)

Re: BM Shiftplus Install With Pictures #70380
Wednesday, October 08, 2003 9:55 PM
now go back and cut those connectors out get some heat shrink tubing a soldering iron and do it right. Exposure to moisture is a problem in your future.
Re: BM Shiftplus Install With Pictures #70380
Friday, October 17, 2003 8:14 AM
OH so now you do it this way :p I guess I wasnt the only retard hooking it up wrong... I still feel like a tard though :p <br>

12.770 @ 111.99 Intercooled Eaton M62


Re: BM Shiftplus Install With Pictures #70380
Friday, October 17, 2003 11:59 AM
i used heat shrink style butt connectors that GM uses for electrical repairs , on mine


and my ETS light will come one at stage 1

<br>



Re: BM Shiftplus Install With Pictures #70380
Wednesday, January 21, 2004 11:11 AM
Thank you so much! I was looking for this post for a while. I've got the Shift Plus as well and I used the connectors that came with the kit and put in the same exact spot you did, with no luck. I guess I didn't make contact well enough. I even went out and bought the connectors from Home Depot! Hopefully tonight I can get it put in.

I have a question for you now: where did you mount your switch inside? Did you use the factory velcro that came with it or something else?

Thanks!

Looz

<br>

"Procrastination is like masturbation; it seems like a good idea at the time, but in the end, you're only screwing yourself."
Re: BM Shiftplus Install With Pictures #70380
Wednesday, January 21, 2004 3:20 PM
mine is inside my ash try which my 97 has , not sure where im going to put it on my 00

<br>



Re: BM Shiftplus Install With Pictures #70380
Wednesday, January 21, 2004 7:30 PM
wow this post was brought back from the dead, lol i was hoping someone was going to look at it seemed like nobody did, here are the pictures of my switches, sorry kinda of dark late and cold and im tired so nobody yell about quality, oh yes to the guy who hatese my tap splices, lol they been on the car over 2 years now, when exactly are they suppose to fail? never once gotten a bad connection from them but oh well to each his own.
<img src="http://www.personal.psu.edu/users/w/z/wzb100/shift/IM000483.JPG">
<img src="http://www.personal.psu.edu/users/w/z/wzb100/shift/IM000484.JPG">

<br>

Its not how fast your car goes....its how much nerve the driver has to push it that fast.
Re: BM Shiftplus Install With Pictures #70380
Friday, January 23, 2004 2:02 PM
WAit a minute, are those christmas lights??

Pat <br>

<img src="http://mywebpages.comcast.net/pahtcub/sample.jpg">
Non-member of Team Unofficial
"No club, no rules, no leaders,no sponsors, NO Bull$hit"
Re: BM Shiftplus Install With Pictures #70380
Friday, January 23, 2004 3:41 PM
LOL ignore the christmas lights!!! look at the switches, lol but yes it is christmas lights , 100 strand <br>

Its not how fast your car goes....its how much nerve the driver has to push it that fast.
Re: BM Shiftplus Install With Pictures #70380
Friday, January 23, 2004 3:52 PM
LittleBill,

I have that same set from Home Depot. What gauge is that? Thanks!

Looz


<br>

"Procrastination is like masturbation; it seems like a good idea at the time, but in the end, you're only screwing yourself."
Re: BM Shiftplus Install With Pictures #70380
Friday, January 23, 2004 5:22 PM
what u talking about looz?? the christmas lights? i got those from rite aid for a buck 99, guage? guess i would say 18

<br>

Its not how fast your car goes....its how much nerve the driver has to push it that fast.

Re: BM Shiftplus Install With Pictures #70380
Friday, January 23, 2004 5:28 PM
I was referring to what gauge of wire is it for the wiring for the clamps! LOL I saw you used red, but in the kit I bought there's like three red clamps in there! What gauge?

Thanks!


Looz

<br>

"Procrastination is like masturbation; it seems like a good idea at the time, but in the end, you're only screwing yourself."
Re: BM Shiftplus Install With Pictures #70380
Friday, January 23, 2004 5:53 PM
oh lol u have to be more specfic, im not sure on the guage of the bmshiftplus wire itself, but i used the red tap splice, which is good between 18-22 guage, any more questions let me know <br>

Its not how fast your car goes....its how much nerve the driver has to push it that fast.
Re: BM Shiftplus Install With Pictures #70380
Saturday, January 24, 2004 7:19 AM
No little bill I think we need to talk about these lights here for a minute, they need some explination.

Pat <br>

<img src="http://mywebpages.comcast.net/pahtcub/sample.jpg">
Non-member of Team Unofficial
"No club, no rules, no leaders,no sponsors, NO Bull$hit"
Re: BM Shiftplus Install With Pictures #70380
Saturday, January 24, 2004 12:51 PM
they make me happy thats all you need to know good sir...


<br>

Its not how fast your car goes....its how much nerve the driver has to push it that fast.
Re: BM Shiftplus Install With Pictures #70380
Friday, February 13, 2004 4:35 PM
back from the dead again

needed the pics to do my 00 cav

<br>



Re: BM Shiftplus Install With Pictures #70380
Thursday, February 19, 2004 9:57 PM
This forum rocks....this is beautiful....detailed instructions with photos...i've had my shiftplus for more than 3 months now and everytime i try to get some help from my friends they're like "well it looks a little complicated....maybe someother time".
The performance forum helps you by redirecting you to Search so why bother to ask?.
Well now I feel like i"ve grown a pair and I'm gonna do this mod alone this sat.
How much is a good used eco trans anyway?
Thanks a lot LittleBill and company
Ruben <br>

SOUTH FLORIDA SUNFIRE
ECOTEC 2.2L
Re: BM Shiftplus Install With Pictures #70380
Monday, February 23, 2004 8:32 AM
Word! I STILL have yet to get off my arse and install these! Now that I think about it, I think I MAY have it on the WRONG red/black wire! I'll have to double check. Thanks again Little Bill!

Back from the dead again!

Looz

<br>

"Procrastination is like masturbation; it seems like a good idea at the time, but in the end, you're only screwing yourself."
Re: BM Shiftplus Install With Pictures #70380
Monday, February 23, 2004 9:01 PM
haha not a problem gentlemen, check out my sway bar install when ur ready to get a front bar installed <br>

Its not how fast your car goes....its how much nerve the driver has to push it that fast.
Re: BM Shiftplus Install With Pictures #70380
Tuesday, February 24, 2004 5:14 PM
NOTE: Do not use the connectors that come with it. They dont work. I tried it and had to start all over again with different ones, the other ones didnt even break through the plastic. Anyway, it works great on my '04. Thanx, LittleBill
Re: BM Shiftplus Install With Pictures #70380
Wednesday, February 25, 2004 10:06 AM
yeah i used the heat shrink style but connectors i got when i worked for chevy as a tech


<br>




Re: BM Shiftplus Install With Pictures #70380
Wednesday, February 25, 2004 2:12 PM
I want to get one of these for my automatic 2002 ecotec but I can't find out where to buy one. Got any sites/stores I could use? Do you know if this will void my factory warranty? <br>


2002 Sunfire GT
2.2 L. Ecotec
Re: BM Shiftplus Install With Pictures #70380
Wednesday, February 25, 2004 7:49 PM
You can get it from Summitracing.com. About the warrenty, reallistically if you want the warrenty dont mod your car. GM will do anything they can to get out of the warrenty with any mod you do. My dad had a friend that put a bug deflector on his Silverado and 6 months later one of his side mirrors started shaking and was really loose, then when he took it into the shop for warrenty work they told him that they wouldnt warrent his car cuz the bug deflector changed the aerodynamics of the car. Technically this would probably just void the warrenty on the tranny but who knows what they'd say or do if anything else drivetrain related happened So you run the risk by doing any mod.
Re: BM Shiftplus Install With Pictures #70380
Wednesday, February 25, 2004 9:32 PM
its been documented that shift kits increase life of the clutch bands, someone on here has 40,000+ and had the tranny inspected and they said it looked great, and he allways left the shiftplus on, i have over 15,000 mine and i miss it every time i turn it off for my mother, she thinks my tranny is breaking when i leave it on
<br>

Its not how fast your car goes....its how much nerve the driver has to push it that fast.
Re: BM Shiftplus Install With Pictures #70380
Thursday, February 26, 2004 5:41 PM
As far as warranty goes, they have to prove that whatever mod you did directly caused the malfunction. For instance, say you install an aftermarket muffler, it backs up and causes your engine to heat up and fry something. They have to prove that your mod caused it, otherwise, they'll cover it. Look it up on SEMA.



Looz

<br>

"Procrastination is like masturbation; it seems like a good idea at the time, but in the end, you're only screwing yourself."
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search