HELP!! B&M shift plus car won't shift out of first - Transmission Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
HELP!! B&M shift plus car won't shift out of first
Thursday, February 24, 2005 5:06 PM
I just finished installing a B&M shift plus on my 2004 2.2l ecotec cavalier with an automatic trans. The install was easy following little bills instructions. Finished up install. Went for test drive around the block and discovered that my car will not shift out of first gear. The check engine light is on also. Please give any help you can I need to fix this as soon as possible because this is my only means of transportation.

Re: HELP!! B&M shift plus car won't shift out of first
Thursday, February 24, 2005 6:14 PM
Make sure you have the right wires hooked up. There are 2 differnet blue wires with white stripes... dark and light. Same for the red. Also make sure your connections are good. The connectors in the kit are crap. Just get a $5 soldering iron and fix it up good.
Re: HELP!! B&M shift plus car won't shift out of f
Thursday, February 24, 2005 6:15 PM
Is it possible for a bad connection to cause this?
Re: HELP!! B&M shift plus car won't shift out of f
Thursday, February 24, 2005 6:20 PM
no he was suggesting it to see if you would run out an look

and like said it most likely a wrong wire or bad connection. unhook it and see if it still does it man.

...and double posting is a bad thing too



Re: HELP!! B&M shift plus car won't shift out of f
Thursday, February 24, 2005 6:24 PM



It could be the problem... but id double check the wires. See how there are 2 red wires with black stripes in the picture. Make sure they sent you the right one, #70380.
Re: HELP!! B&M shift plus car won't shift out of f
Thursday, February 24, 2005 7:23 PM
You have it hooked to the wrong wires.


Thats Him Officer The WICKED One.

Re: HELP!! B&M shift plus car won't shift out of f
Friday, February 25, 2005 8:15 AM
I checked it out for him last night, and it looks like he got the right wires (he was given pretty good directions from the guy that sold it to him) but one of the connections was loose, actually snapped clean off, so pin C, pressure control solenoid high, was not making contact - that is, not from the harness to the shiftplus, but the harness to the transmission.

Josh, let me know if you were able to fix it ok in the daylight today. If its not pretty or you are worried about it, if you are going to be around this weekend we can get it fixed up nicely for you.




"Only two things are infinite, the universe and human stupidity, and I'm not sure about
the former." - Albert Einstein

Re: HELP!! B&M shift plus car won't shift out of f
Friday, February 25, 2005 12:54 PM
thank you for helping him out dave , if need let me know i can bring a few more connectors with me this weekend








Re: HELP!! B&M shift plus car won't shift out of f
Friday, February 25, 2005 4:50 PM
Hey guys I already im'd you but just wanted to be sure we were cool. I need help as soon as possible this weekend but at your convenience. Give me a call or email me when you know for sure what is going on.
(626) 806-5468
jc41224@yahoo.com
Thanx for everything.
Re: HELP!! B&M shift plus car won't shift out of f
Monday, March 14, 2005 12:11 PM
Hey man - was this ever fixed? My buddy with an alero (2.2 eco with the 4t40e) is having the exact problem you describe...


_______________________
Project L61 - Slowly but Surely
16.2@82.54 Auto w/ Intake and Exhaust
14.9@89.79 w/ a Blower





Re: HELP!! B&M shift plus car won't shift out of f
Monday, March 14, 2005 1:07 PM
Hey guys, I was the one mentioned in the post above that was havin problems. Turns out the harness/plug wasnt in as far as it could have, which had led to some issues. LOVIN THE RESULTS.

Re: HELP!! B&M shift plus car won't shift out of f
Monday, March 14, 2005 1:33 PM
04silvercavy , his cav was fixed

i guess he managed to cut a wire to short and tried to solder the wires and melted something in the plug

so all is good , although he is stock right now


ill be out to install it for him soon , i hope








Re: HELP!! B&M shift plus car won't shift out of f
Monday, March 14, 2005 2:49 PM
[quote=97cavie24ls(JDM cav sedan™)]04silvercavy , his cav was fixed

i guess he managed to cut a wire to short and tried to solder the wires and melted something in the plug

so all is good , although he is stock right now


ill be out to install it for him soon , i hope

You do house calls now. Sweeet!

j/k



^^Home made sig^^ ghetto, I know. http://members.cardomain.com/blackoutfire
Re: HELP!! B&M shift plus car won't shift out of f
Monday, March 14, 2005 6:08 PM
in certain cases , i do







Re: HELP!! B&M shift plus car won't shift out of f
Monday, March 14, 2005 10:26 PM
Yeah we got it fixed as well - as Landon said, it just wasn't in correctly. I went for a ride.... I CAN NOT WAIT to get mine installed!!!


_______________________
Project L61 - Slowly but Surely
16.2@82.54 Auto w/ Intake and Exhaust
14.9@89.79 w/ a Blower





Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search