ok my Spec clutch kit came with the slave cylinder and i remeber reading or hearing that the Spec slave cylinder was garbage because they dont last and they leak or something like that.
well i dont know how true that is or if naybe that person installed the slave wrong or had a defective one or whatever.
so my question is should i use the new one from Spec that came with with the clutch or should i buy a brand new GM slave or can i re-use my original? my car only has about 18,000 miles on it.
thanks in advance
laters
My car was made with wrenches, Not chopsticks.
please can someone answer this or give me a lil insight on this? i would like to know before sunday when i replace the clutch
thanks again everyone
laters
My car was made with wrenches, Not chopsticks.
? anyone...
My car was made with wrenches, Not chopsticks.
I dont know how junk they are, but I used the one they gave me and its been fine for me. I dont know how the GM one would be any better.
Jeff R
Red96GT
i have the spec on mine and no problems.....
but my understanding is that its an acdeclo unit..i think......which is a subsidarary oof gm
<img src="http://registry.gmenthusiast.com/images/snowman/thumbnail_sunfire.gif">
<img src="http://registry.gmenthusiast.com/images/snowman/thumbnail_personal_pic.jpg">
The spec one is a GM one...acdelco is a certified GM parts distributor.
soooooo.....
hmmm. NO problems with mine except that it is a little noisy when it is cold outside.
-da chinchilla
<img src="http://registry.gmenthusiast.com/images/jiggamon/avatar15569_2.gif">
2.4 CavaWeir (a.k.a. jiggamon) wrote:The spec one is a GM one...acdelco is a certified GM parts distributor.
soooooo.....
hmmm. NO problems with mine except that it is a little noisy when it is cold outside.
Yup. I talked to spec too, they use and reccommend stock gm slave cyls.
Nate
Evolution of Cavyboy-->C22t--> C24na--->c24s/c
1995 Cavalier W/2k1 Engine
GM S/C 13.940@99.78pmh w/2.068 60ft
lol.... the one in my kit had a g.m. part #
durrr i should have looked at it first
thanks everyone
btw clutch is in and i love it! a lil noisy but no biggie
My car was made with wrenches, Not chopsticks.
If you look at the slave cylinder you should see that it is the exact gm part....it says gm on it. I've had mine in for 25,000 miles now with no problem.
03 Ecotec
My car was made with wrenches, Not chopsticks.
