Event,
When Chessapeek Trans did your valve body work on your 125C, did they use the TransGo shift kit or did they use the Superior kit? If they used the TransGo, do you know if they had a problem with shifting in to 2nd gear? Was there a problem with the shims used on the 2nd gear band?
The shop that is doing my tranny is having problems with the tranny shifting from 1st straight to 3rd. They are looking to remove the .030"shim that tightens the 2nd gear band, too tight? The kit comes with a .030" and .050"shims to space the band .030", .050" or .080" tighter. The .050" shim did not fit at all, so they installed the .030" shim.

Any help here would be appriciated, MadJack

BTW, anyone interested in following this thread, ref:: http://www.j-body.org/forums/read.php?f=41&i=1893&t=1893&arch=1#1893

i can check and get back to ya tommorow sometime.

as for shifting, nearing 30k now and no problems.