Karo, I have an autotrans and a B&M. I just need the damn part numbers for the plug ends. They are Delphi "Micro-Pack 100W Sealed Male Connector Assembly, Max Current 7.5 amps", but can not find the correct ones. The electronics and everything is the easy part.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
I know whats on the inside of the B&M unit if you are interested.... at one point or another I used to know the guy who made it for B&M....
Any info would be great.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Is there any part numbers on the OEM plugs on the car to reference by. I would think when they casted those in plastic they would have marked them somehow...
-Aaron
www.TurboTechRacing.com
Performance Parts For Cavalier, Sunfire, Cobalts and More!!!
i have an extra male plug if you want it mike. let me know.
Aaron. No there are no part numbers in the molded into the plugs. I would have had plugs already if that were true. I know the family they come from, but CAN NOT find the correct plugs. There are tons of similar plugs, but not the correct ones.
Brad, that really wouldn't help at this time, but thanks.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
I dont have a GM manual infront of me now, but maybe in those orange books? Anything listed in there?
-Aaron
www.TurboTechRacing.com
Performance Parts For Cavalier, Sunfire, Cobalts and More!!!
I wouldn't let the plugs keep you guys from venturing into this... so what if you have to cut and splice a little bit? Just get some connection blocks from Phoenix Contact, mount them on the PCB, and have the customer screw the cut wires on to clearly labeled connector.
I think you guys are focusing on the plugs too much, get the details worked out, how to hook it up is a minor issue.
4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!
Ron this is true. The electrical is the easy part. You could figure it out in less than 10 minutes.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
sorry i have been busy this week and haven't been able to measure the resistance of the b&m unit. i have vacation next week would ya'll still like me to do it? also people are willing to splice for the b&m i would imagine a few more wires wouldn't hurt. long as the instructions are clear. just let me know.
sorry i never got back to this, been very busy... but a friendly bump to the top and is there any more info guys?
i found some stuff i printed off of the internet a little while ago when this little baby was a project of mine. dont think i will be able to scan them in, so i might just take some phots of them. i should have them up later today, as long as i dont forget lol.
1997 RedR - ZedR
Crank pulleys & M61 to L61 TB adapter plates has been eating up all my free time. Any more info would be great though.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Kardain, Thanks!
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO