Big HP=Stock flywheel bolts no good. (pics inside) - Transmission Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Big HP=Stock flywheel bolts no good. (pics inside)
Saturday, April 17, 2010 1:59 PM
Hey everyone this is just a heads up about the stock flywheel bolts. They are a torque to yeild bolt which should not be reused. But anyways I did a little research and found the ARP makes a flywheel bolt for the Saab 2.0. Exact same as ours. The package comes with eight of them. Obviously the L61 will only use 6 and the LSJ I believe uses all 8. I called Karo at allecotec.com or carcustoms.net and he hooked me up. They were cheap for one set so im sure if you email him (sales@allecotec.com) he can hook you up with some. A cheap way to make it a little safer. Here are the pics.





Edited 1 time(s). Last edited Wednesday, April 21, 2010 2:49 PM

My Sig Was To Big

Re: Big HP=Stock flywheel bolts no good. (pics inside)
Saturday, April 17, 2010 3:35 PM
Good info, but i was expecting to see some destruction.





Re: Big HP=Stock flywheel bolts no good. (pics inside)
Saturday, April 17, 2010 6:52 PM
me too....lil upset bouth that...but i will be emailing Karo shortly about these....lol




BOOSTED FOR MY OWN PLEASURE
Re: Big HP=Stock flywheel bolts no good. (pics inside)
Sunday, April 18, 2010 8:15 PM
i wonder if its the same thread as 2.4s.....




R.I.P. Brian Klocke, you will never be forgotten
Re: Big HP=Stock flywheel bolts no good. (pics inside)
Monday, April 19, 2010 10:01 AM
I do have some destruction pics ill try to post them up later


My Sig Was To Big
Re: Big HP=Stock flywheel bolts no good. (pics inside)
Wednesday, April 21, 2010 6:31 AM
Was wondering the same thing Brandon...

Pics?










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Big HP=Stock flywheel bolts no good. (pics inside)
Wednesday, April 21, 2010 6:20 PM
I have a good amount coming in for the Eco guys... I'll check and see if it will work on the LD9 or not since I have a few spare LD9 cranks sitting out back

-Karo




Re: Big HP=Stock flywheel bolts no good. (pics inside)
Thursday, April 22, 2010 10:35 AM
Karo (Car Customs) wrote:

I have a good amount coming in for the Eco guys... I'll check and see if it will work on the LD9 or not since I have a few spare LD9 cranks sitting out back

-Karo



LEMME KNOW! & SEND ME A BILL FOR A SET.


-Trailblazer SS - not so custom 6.0L - custom intake - custom tune
- (1) 2.4L on an engine stand (1) blown trans (2) good quad trans (1) eco trans = party

Re: Big HP=Stock flywheel bolts no good. (pics inside)
Friday, April 23, 2010 3:11 PM
Boosted2point4 wrote:

i wonder if its the same thread as 2.4s.....


Brandon,

I am using ARP # 254-2801 for my flywheel bolts and they work just fine. They are for a Ford Modular 4.6 & 5.4

I have to find the part numbers for the pressure plate bolts.








Jason
99 Z24 Supercharged
157hp/171tq - NA
190hp/170tq @ 6psi

LG0/LD9 for Life
Re: Big HP=Stock flywheel bolts no good. (pics inside)
Sunday, April 25, 2010 6:58 PM
awesome jason, but i dont need presure plate bolts mine came with the twin disc



R.I.P. Brian Klocke, you will never be forgotten
Re: Big HP=Stock flywheel bolts no good. (pics inside)
Sunday, April 25, 2010 7:02 PM
well @!#$... i gots to get me a set now...

hook me up boys.



All I want... is a little of the good life

Re: Big HP=Stock flywheel bolts no good. (pics inside)
Sunday, April 25, 2010 7:12 PM
Blwn LD9 wrote:

I am using ARP # 254-2801 for my flywheel bolts and they work just fine.


just ordered a set for myself



Re: Big HP=Stock flywheel bolts no good. (pics inside)
Sunday, April 25, 2010 8:02 PM
Blwn LD9 wrote:

Boosted2point4 wrote:

i wonder if its the same thread as 2.4s.....


Brandon,

I am using ARP # 254-2801 for my flywheel bolts and they work just fine. They are for a Ford Modular 4.6 & 5.4

I have to find the part numbers for the pressure plate bolts.

These are the same for the LN2 also... If you have an auto you can use the 254-2901's. I sheared all of mine while doing a highway pull. Nothing like sitting on the side of the highway for a few hours waiting on a flatbed....







P&P Tuning
420.5whp / 359.8wtq

Re: Big HP=Stock flywheel bolts no good. (pics inside)
Monday, April 26, 2010 9:07 AM
Boosted2point4 wrote:

awesome jason, but i dont need presure plate bolts mine came with the twin disc


Opps, how did I forget about that clutch you have

For everyone else Pressure plate bolts: 108-2201( sorry guys.....they are for a Honda). I don't have the pressure plate bolts on yet, but they will be on the new motor






Jason
99 Z24 Supercharged
157hp/171tq - NA
190hp/170tq @ 6psi

LG0/LD9 for Life
Re: Big HP=Stock flywheel bolts no good. (pics inside)
Tuesday, August 31, 2010 5:31 AM
Did anyone get information if these flywheel bolts are interchangable between ecotec's? I need a set ASAP!


ECOtec DOHC

Re: Big HP=Stock flywheel bolts no good. (pics inside)
Tuesday, August 31, 2010 2:57 PM
what is considered big hp? before these start sheering off? I should get some probably anyway.



Re: Big HP=Stock flywheel bolts no good. (pics inside)
Tuesday, August 31, 2010 4:56 PM
Blwn LD9 wrote:

Boosted2point4 wrote:

i wonder if its the same thread as 2.4s.....


Brandon,

I am using ARP # 254-2801 for my flywheel bolts and they work just fine. They are for a Ford Modular 4.6 & 5.4

I have to find the part numbers for the pressure plate bolts.


Those are what we have!





Re: Big HP=Stock flywheel bolts no good. (pics inside)
Tuesday, August 31, 2010 5:08 PM
^^ are ECO's the same??!!


ECOtec DOHC

Re: Big HP=Stock flywheel bolts no good. (pics inside)
Friday, June 01, 2012 4:20 PM
i know this is an old thread but pretty sure this has happen to me... any pics of the damage? more info? mine has about 1inch of play in the flywheel via crank and it makes a dont rod bearing noise.started pulling the tranny but just trying to find info and pn if i need new bolts (ARP) any help would be sweet.


13.22 @ 105.2
Re: Big HP=Stock flywheel bolts no good. (pics inside)
Sunday, June 03, 2012 12:15 PM
you did good to start tearing it down. mine also sounded like a rod knock right before it blew. i was stupid and went out and beat the ever living piss out of it instead of tearing it apart tho LOL

when mine happened it only had 151.4whp and 149.9wtq so "big HP" really isnt needed to sheer them



Come join us over on the Olds Quad 4 and Twin Cam Facebook group!
Re: Big HP=Stock flywheel bolts no good. (pics inside)
Sunday, June 03, 2012 3:40 PM
well it happen at the end of last summer... thought it was a rod knock so i shut it off pulled over then called my folks and got it towed to storage and figured id deal with it this summer, got it home took the oil pan off everything is perfect then i just randomly tried to move my flywheel and it did move without the crank, looked and my dad and he's like well lets start pulling the trans, but rain has been holding us back (no garage and its suppose to rain the whole week/weekend comming....FML).


13.22 @ 105.2

Re: Big HP=Stock flywheel bolts no good. (pics inside)
Sunday, June 03, 2012 3:49 PM
Jean if your looking for a set of ARP flywheel bolts. i got some just message me.






Re: Big HP=Stock flywheel bolts no good. (pics inside)
Monday, June 04, 2012 6:42 AM
I got a set of ford pinto flywheel bolts. comes with all 6, exactly what is needed and the exact same lenght. Just gotta do your research.


http://www.overkillengineeringmotorsports.com/
Re: Big HP=Stock flywheel bolts no good. (pics inside)
Monday, June 04, 2012 8:36 AM
Post part numbers maybe^



Re: Big HP=Stock flywheel bolts no good. (pics inside)
Monday, June 04, 2012 7:07 PM
well got the trans out! not as bad as i thought, nothing was broken but all 6 bolts were backed off, not to sure what happen here, i followed the torque specs and sequence and yes i put lock tight, maybe just to many hard hits from the clutch who knows....getting some arp ones and re installing.


13.22 @ 105.2
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search