Putting out a feeler for custom braided clutch lines. Last company fell through and said they were no longer interested in making them so I am going to make them myself.
These will use custom an fittings so if for some reason you damage the line or anything happens you can replace it yourself with regular braided line and not have to order a complete replacement.
Price will be around $130 shipped. I know it's a little high but the fittings are not cheap at all. I can make them any length you want with any type of bend. I may also do custom colors if there is enough interested but to start out will be black or stainless.
If I get enough people interested I may be able to lower the price.
On the inside my car looks like a fighter jet.
I will create a group buy in january if enough people are interested.
On the inside my car looks like a fighter jet.
Is this the line that rubs on a fender seam and blows every30000 miles.
I bought a bmw m3 line but it has blue fittings. Blue doesn't go with orange unless someone is a Denver Broncos fan,
So yes I'd be interested especially at a lower price.
Yes this is that line.
On the inside my car looks like a fighter jet.
I'll start making these next week and make a group buy if there is interest.
On the inside my car looks like a fighter jet.
Can we get at least 10 people interested on here?
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
On the inside my car looks like a fighter jet.
These are almost the same price as factory replacements and will out last the plastic ones.
On the inside my car looks like a fighter jet.
Rob, please put me down for one.
I can't copy and paste. Thank you
1. Carl Calvin
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
On the inside my car looks like a fighter jet.
I started making these again if anyone's interested. I had a lot of people asking and have a group buy on facebook again. F23 is $120 and isuzu will be $155 if everything works after I test it. PM if you want in on it. I will be trying to set a group buy up on here.
On the inside my car looks like a fighter jet.
If I still had a F23 HHR I would buy this in a heart beat.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
I'm interested in buying one ASAP. I'm about 30 mins away from you. Check your inbox and let me know. Thanks!
I'm also intrested. I have a 2003 Sunfire and love everything about the car EXCEPT the clutch line, slave cylinder, and master cylinder. All very poor designs so I'm intrested in upgrading them. Also if like to ask if anyone would possibly know of a problem I am having. I've replaced my whole clutch system. New clutch new aluminum flywheel new clutch lines new master cylinder and yet I still have an issue with air in the line. Tried bleed myself. Didn't work. Brought it to fm to bleed it... Didn't work. What happens is I get in my car and at first clutch feels great.... After an hour of driving or so I start lossing pressure. I don't get it. Pedal will start only depressing clutch half way down pressing the pedal and eventually gets stuck and won't come back so I have to pull it up with my foot. But I can still manage to depress the clutch.... CRAZY thing is if I leave the car sit until the next day... It's perfect again only to have the same thing happen within the hour. Any suggestions ? I think my new master cylinder was bad when I got it but I can't confirm that so Mabey someone has some advice for me ? Anyways define fly intrested in clutch line.
Also Interested - in the middle of a clutch/flywheel upgrade. Would be nice to have this braided line when I go to install next month.
"FRIENDS DON'T LET FRIENDS DRIVE STOCK"
I tried doing this about 2-3 years ago.
It flopped.
Good luck, I have been running mine ever since.
I'm interested in one for the F23.
