BM Shiftplus Install With Pictures #70380 - Page 11 - Transmission Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: BM Shiftplus Install With Pictures #70380
Monday, November 03, 2008 12:12 PM
ecotecpower wrote:The instructions show tapping into the wire right next to the blue one. I did this but not noticing any difference on either setting



yeah same here


ShowOff Customz
03 Cavalier
73 Beetle
68 Fairlane 500



Re: BM Shiftplus Install With Pictures #70380
Monday, November 03, 2008 2:01 PM
I think I found my problem, havent had a problem to drive the car. I pulled the blue clips back off the wires and they hadnt even cut threw the outer part of the wire. I had a feeling that may be a problem, the wires are the right size for red clips not blue.



Re: BM Shiftplus Install With Pictures #70380
Monday, November 03, 2008 2:42 PM
i figured that was it but just never went out and got any of the red ones


ShowOff Customz
03 Cavalier
73 Beetle
68 Fairlane 500


Re: BM Shiftplus Install With Pictures #70380
Wednesday, February 04, 2009 6:21 PM
Sorry for bringing this up again.
Ok onto my question.
2004 sunfire 2.2eco 4spd auto.
Will this throw any codes? CELs? etc?
I was thinking of buying one.
Any of you eco guys notice a diff? Any problems?
Thanks guys,
~Spy
Re: BM Shiftplus Install With Pictures #70380
Thursday, February 05, 2009 5:38 AM
Gary Brown wrote:Sorry for bringing this up again.
Ok onto my question.
2004 sunfire 2.2eco 4spd auto.
Will this throw any codes? CELs? etc?
I was thinking of buying one.
Any of you eco guys notice a diff? Any problems?
Thanks guys,
~Spy


It wires in exactly the same and all and does work well. Though Ecotecs seem to be less forgiving about it. If left on constantly or too long the computer may get a little funky on you when shifting (some say their transmission still shifts as if the Shiftplus were on when it was off, my computer seems to have adjusted to the pressure and weakened it, etc), but fortunately as I just found out, if you reset your computer everything returns to normal. Its never given me a CEL or code. I haven't heard of an major problems nor have I had any, just little quirks here and there that a reset seems to fix.



Re: BM Shiftplus Install With Pictures #70380
Sunday, February 08, 2009 5:59 PM
Is there any interest in me retaking the photo's of the bmshiftplus installed? the originals are long gone, but if people would really like them again i can retake them....


Its not how fast your car goes....its how much nerve the driver has to push it that fast.
Re: BM Shiftplus Install With Pictures #70380
Sunday, February 08, 2009 6:39 PM
Re: BM Shiftplus Install With Pictures #70380
Monday, February 09, 2009 3:52 PM
Zenith wrote:http://www.j-body.org/forums/read.php?f=41&i=4376&t=4376&p=9


ok


Its not how fast your car goes....its how much nerve the driver has to push it that fast.
Re: BM Shiftplus Install With Pictures #70380
Thursday, February 12, 2009 7:24 PM
OK so Ive had the shiftplus for awhile now and i don't think my car likes it.
I know i have it installed right cause i triple checked. When i first start my car its really bogged down until it shifts once or twice
and by bogged down i mean there is no power. I also have a CEL on any stage it for a ISS sensor voltage signal low.
Does anyone else have these kinds of problems. Oh and its installed on a 2005 Eco cavalier.


The revolution is coming.
http://www.azjbo.org/forum/
Re: BM Shiftplus Install With Pictures #70380
Wednesday, April 08, 2009 10:28 PM
can anyone send me the pics or repost they don't appear to be on anymore
Re: BM Shiftplus Install With Pictures #70380
Thursday, April 09, 2009 12:38 PM
Ray Emmart wrote:can anyone send me the pics or repost they don't appear to be on anymore


Dude re-read this page, you'll find a LINK to the pictures.






Re: BM Shiftplus Install With Pictures #70380
Wednesday, April 22, 2009 7:56 PM
i have a 1997 chevy cavalier 2.4 with all the bolt ons and connecting rods, forged pistons, and cams. now my question is i just tunned my car with hp tuners do i have to re-tune after i install the shift plus???? will it affect it if i don't tunned it????
Re: BM Shiftplus Install With Pictures #70380
Wednesday, April 22, 2009 8:01 PM
You will not have to retune



Re: BM Shiftplus Install With Pictures #70380
Wednesday, April 22, 2009 8:10 PM
nut will it affect the car????
Re: BM Shiftplus Install With Pictures #70380
Wednesday, April 22, 2009 8:13 PM
The shift plus just boosts the pressure in the transmission electronically.

If your transmission is working normally now, you can add the shiftplus and everything will be fine.
If your tune has messed with the transmission, the shift+ will probably just make it worse (it would be hard to predict)



Re: BM Shiftplus Install With Pictures #70380
Friday, May 01, 2009 4:30 AM
i installed mine last weekend i like it so far have only turned it on 3-4 times



Re: BM Shiftplus Install With Pictures #70380
Thursday, May 14, 2009 3:26 AM
This picture posted a few pages back is WRONG.....
Shouldn't it be the red/black wire DIRECTLY under the blue wire.






PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: BM Shiftplus Install With Pictures #70380
Tuesday, June 23, 2009 3:36 PM
-MD- Enforcer wrote:This picture posted a few pages back is WRONG.....
Shouldn't it be the red/black wire DIRECTLY under the blue wire.



This is wrong. I have posted the correct ones now. Hopefully a moderator will move my pictures back to my first post. Who is the mod anyway?


Its not how fast your car goes....its how much nerve the driver has to push it that fast.
Re: BM Shiftplus Install With Pictures #70380
Tuesday, June 23, 2009 3:39 PM
I hope this will stop the ton of email i get on this subject once and for all. The pictures below show the correct wires, hopefully there can be no more possible confusion anymore. MOD's please edit my first post on this, so people find the pictures easier










Its not how fast your car goes....its how much nerve the driver has to push it that fast.
Re: BM Shiftplus Install With Pictures #70380
Tuesday, June 23, 2009 3:48 PM
Excellent pics, very helpful!





* * BIG FOR SALE POST * *
Re: BM Shiftplus Install With Pictures #70380
Thursday, June 25, 2009 1:35 AM
I loved mine before I did my ecotec swap (2200 to eco), just gotta reinstall it...


had a blown ecotec swapped 2000 cavy, now just an 02 Grand Am, and a 74 BMW 2002...

Re: BM Shiftplus Install With Pictures #70380
Thursday, July 09, 2009 6:20 PM
ok so what are the shifts supposed to feel like?i just installed this and cannot tell if it's workin on 1 or 2....some shifts feel smoother than normal one felt rougher....i'm not sure if i hooked it up right but i did follow instructions and i'm pretty sure i've got the right wires on the right wires.....


Re: BM Shiftplus Install With Pictures #70380
Thursday, July 09, 2009 6:26 PM
Put it in setting two
start the car
Put the car in neutral then put it into drive
If it feels like your engine just hit the firewall then it's working right
if not, double check.



Re: BM Shiftplus Install With Pictures #70380
Thursday, July 09, 2009 6:36 PM
def works.... .....need more time behind the wheel to adjust to it though.....can't wait for the weekend!!!!!!!!!!!


Re: BM Shiftplus Install With Pictures #70380
Thursday, July 09, 2009 7:27 PM
If any one needs one we have them in stock, for a quick ship, at www.TurboTechRacing.com


-Aaron
www.TurboTechRacing.com

Performance Parts For Cavalier, Sunfire, Cobalts and More!!!
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search