I mean seriously, almost 300 bucks just for that?? They had to go and make it part of the slave cylinder didn't they! Anyone sell aftermarkets that are any good?
napa has them for like 150 and you can get them direct for spec for about 75 . i got mine from spec and it was fine just email or call them
I have an new GM one that i didn't use from my clutch kit. I lubed up the inside but never installed it. Was planning on selling it for 100US. +Shipping.
Nate c22_t@hotmail.com
Evolution of Cavyboy-->C22t--> C24na--->c24s/c
1995 Cavalier W/2k1 Engine
GM S/C 13.940@99.78pmh w/2.068 60ft
c24na, if you still have it when I plan on doing this, I'll be sending you an email.
Jonathan French (minitransam) wrote:c24na, if you still have it when I plan on doing this, I'll be sending you an email.
Cool. When do u plan to do this? i plan on putting it on ebay shortly with starting bid at 100US.
Nate c24na
Evolution of Cavyboy-->C22t--> C24na--->c24s/c
1995 Cavalier W/2k1 Engine
GM S/C 13.940@99.78pmh w/2.068 60ft
My spec clutch came with e Throw out bearing when i bought it. Centerforce doesn't come with one and it is a really great clutch.
2004 Grand Prix GTP (Competition Group)
SOLD-->1999 Z24 5M-#30 to register on JBO
"You can please some of the people some of the time but you can't please all the people'
all the time
I'm not sure. I'm starting to think that i'm being paranoid and the clutch isn't slipping at all. I can floor it in 5th gear at 40 and the car bogs down. Doesn't seem to be slipping at all.
my spec stage 1 came with one its the GM one and that was barely 300, for the cost you might want to consider the clutch upgrade especially if you plan on continuing to have fun at Maple Grove
1989 Turbo Trans Am #82, 2007 Cobalt SS G85
Even AutoZone has the stock replacement for $75. Just ordered one.
hey guys are your refering to the getrag throwout bearing? or the izuzu?
cause i am in need of one and i am wonderign if the ones yuo can get from autozone for 75 are the same....or if i shoudl go threw spec
thanks
Jeebus, back from the dead. Never did replace the clutch. It's doing fine. Car continues to suprise me. 91K, and still no major repairs.
Jonathan French (minitransam) wrote:I mean seriously, almost 300 bucks just for that?? They had to go and make it part of the slave cylinder didn't they! Anyone sell aftermarkets that are any good?
Jesus 300 dollars
I got one with my SPEC with a pressure plate and clutch disc for 350.
____________________________________________________________________
Madjack wrote:Like I said before, building an engine like ours (2.2 or 2200) is a painstaking chore , since there is so few custom made parts. It's frustrating to me too, but that's what I like about doing this engine, it's the challenge.
i called spec and got it for 125 + shipping
I just ordered an OEM replacement clutch from NOPI w/slave -n- throw out , for about 180 inc. shipping.
