Hey guys, i just got my short shifter installed tonight and i no loner have 1st and 2nd gear. I marked where the cables were at before i disconnected them, now when i connected them at the lines i dont have 1st or 2nd. any ideas as to what i could do? tia
when i got mine for my 05 cavi, i had the same problem. i went for a drive and had to force it to go into 1st and 2nd. i went home, dsconnected the cables again then put the shifter into 1st then hooked the cables back up, and it was fine. ive had it in there for about a month and i havnt had a problem besides that.
thanks for the tip, I actually did the same thing before checking your post and it worked. thanks for the response.
