Motegi Traklite - Wheel and Tire Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Motegi Traklite
Wednesday, March 28, 2012 7:57 AM
Hey guys. I wanted some feedback in regards to the Motegi Tracklites.
I am looking forward to change/upgrade my 16' ls sport chrome wheels for something stronger and lighter and I was thinking of Motegi Tracklites, any thoughts?
I found a really good deal(I think it is a really good deal) of Traklites 16 x 7/5 x 100/ +40 offset for $650, what do you guys think, is it worth it?

Re: Motegi Traklite
Wednesday, March 28, 2012 8:35 AM
Which version traklites?





I think there are like 5-6 different versions out now. Most are 5 spoke. Some are 6 spoke. Most are forged, and some are two piece forged.

ALSO...what is the Hub Bore?

40-45 offset is fine.

I know they "used" to be sold in 40, 42, and 45 offset.






Edited 1 time(s). Last edited Wednesday, March 28, 2012 8:42 AM

PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: Motegi Traklite
Wednesday, March 28, 2012 9:33 AM
Hi, thank you for responding.
bolt patter is 5x100
Hub bore is 70.64
Manufacturer Part Number: MR2388678040
It is 1 piece forged
Material alloy
Width 7 / Diameter 16 / Offset 40
Its the second picture I believe.
What do you think, for $650 is it worth it?
Re: Motegi Traklite
Wednesday, March 28, 2012 10:05 AM
$650 for a new set is a GREAT price. Normally they are 250-300 a piece. Used is an average price.

J-bodies hub bore is 57.1mm.
You'll need some hub centric rings. P/N HR-705710 would be close, but I would call motegi to get exact size needed. Part number I gave is for 70.1mm by 57.1mm.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: Motegi Traklite
Wednesday, March 28, 2012 10:11 AM
Where can I buy the centric rings from? Are they for extra precaution or to make the right fitment before installing them?
Re: Motegi Traklite
Wednesday, March 28, 2012 1:28 PM
Summit racing sells some, and most parts stores.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: Motegi Traklite
Thursday, March 29, 2012 9:18 PM
It keeps your wheel centered on the hub or else it can slide around and break off wheel studs.



Re: Motegi Traklite
Friday, March 30, 2012 8:18 PM
Can someone verify me what size of centric rings I need in order to fit the motegi traklites right? Thank you and much appreciated.
Re: Motegi Traklite
Tuesday, April 03, 2012 9:32 AM
-MD- Enforcer wrote:$650 for a new set is a GREAT price. Normally they are 250-300 a piece. Used is an average price.

J-bodies hub bore is 57.1mm.
You'll need some hub centric rings. P/N HR-705710 would be close, but I would call motegi to get exact size needed. Part number I gave is for 70.1mm by 57.1mm.


I paid $500 for my 19's brand new in the box!





Re: Motegi Traklite
Wednesday, April 04, 2012 8:52 PM
Josh G. that is awesome, do you know where can I get them cheaper than $650?
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search