need help - Interior Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
need help
Wednesday, July 20, 2011 6:11 PM
i know and see that there is a lot of info for the 3 gen j-body but i am looking to see if there is anyway that an other gm seat will fix into my 2 gen cav. i have a 2dr and i want to change them for something else. Maybe a set of grand am seats or some 4 gen f-body seats. I have spent about 1 hour and about 3 years looking at the search on here and i could not get anywhere.(i am sorry but i am new to the whole j-body world)

Re: need help
Wednesday, July 20, 2011 11:09 PM
The easiest seats to match up would be from the same body style car, but basically any seat can/will fit in your car with the right modifications. I'd say go looking at a salvage yard for a nice set of seats that you like and see if they are close to matching the bolt pattern you need and if not how much modification would be needed to make fit.
Re: need help
Friday, July 22, 2011 4:16 AM
so there is no one here that has tried a few different seats and knows what will work and what does not work with out having to mod the seat track???
Re: need help
Friday, July 22, 2011 5:46 AM
14 posts down, in a post called "seats"

http://www.j-body.org/forums/read.php?f=45&i=108532&t=108532


You need to search harder... this literally took me 20 seconds to find.


________________________________________.
Still not low enough for a signature.

Re: need help
Saturday, July 23, 2011 5:46 AM
Twenty4z wrote:14 posts down, in a post called "seats"

http://www.j-body.org/forums/read.php?f=45&i=108532&t=108532


You need to search harder... this literally took me 20 seconds to find.


stop telling people to search when you don't even bother reading their post first. that link you provided is for 3rd gen seats. he's asking about 2nd gen seats. so go sit in the corner for awhile ok?



Re: need help
Saturday, July 23, 2011 5:55 AM
http://www.j-body.org/forums/read.php?f=29&i=61992&t=61992#61992

that was all i found in a short search. but like somebody else said, anything will fit with the right amount of modification. if your'e wanting a seat that will actually bolt right up to the sliders you may have to post a new thread in the 2nd gen forum, might get more intelligent responses there.



Re: need help
Saturday, July 23, 2011 6:21 AM
blucavvy wrote:http://www.j-body.org/forums/read.php?f=29&i=61992&t=61992#61992

that was all i found in a short search. but like somebody else said, anything will fit with the right amount of modification. if your'e wanting a seat that will actually bolt right up to the sliders you may have to post a new thread in the 2nd gen forum, might get more intelligent responses there.




I am going to do that here shortly. I know the 3 gens are out like crazy and the 2 gens are going to the waste side. I was just hoping that seen they had been around long that someone out there may have done this and is this on the site.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search