That is the wiring diagram I used above.
Mmmmmmmmmmmmmm supercharge cavy..............I wish I had the cash to do that.
"Remember do what you like because you have to drive it."--Me
Here is a pic of my new bracket
Jason
99 Z24 Supercharged
157hp/171tq - NA
190hp/170tq @ 6psi
LD9 for Life
^^ wish I could do this swap.
I think I even have two useably brackets.
What wing are you using?
-M
Remember....syringes go in the RED waste basket.
NeoJuice wrote:I also need some wire clips/organizers (cant find them anywere and the wires set never came with any)
the napa i work at has them... any autoparts store should be able to get them for you they're not that hard to find
My 3400 Swap Page
Jason stepped up the game with that bracket! He can change his relays and fuses too.
Nicely done sir.
Joe Schulte wrote:Jason stepped up the game with that bracket! He can change his relays and fuses too.
Nicely done sir.
Thanks Joe. The bracket is not quite done yet. It still needs painted
Jason
99 Z24 Supercharged
157hp/171tq - NA
190hp/170tq @ 6psi
LD9 for Life
Blwn LD9 wrote:Here is a pic of my new bracket
Great work on the bracket. I modified a cruise control brack I think off a pre 99 to mount my coils to. It works and havent had any issues.
Wow I cant belive it one of my posts brought back from the dead. The funny thing is I still havent picked up any wire clips/organizers. Ill have to maybe do that soon.
Mastin wrote:^^ wish I could do this swap.
I think I even have two useably brackets.
What wing are you using?
-M
For info on the wing check out the information in my registry. If you need more pic's/information let me know at jarid@shaw.ca there are only 1 of 3-4 that I know of.
NeoJuice wrote:Blwn LD9 wrote:Here is a pic of my new bracket
Great work on the bracket. I modified a cruise control brack I think off a pre 99 to mount my coils to. It works and havent had any issues.
Wow I cant belive it one of my posts brought back from the dead. The funny thing is I still havent picked up any wire clips/organizers. Ill have to maybe do that soon.
I have been meaning to update this post, but I kept forgetting about it
I was originally going to use a cruise crontrol bracket, but I wanted to try something different. Only thing I have left to do is get a shorter wire set and attach the wire separater clips
Jason
99 Z24 Supercharged
157hp/171tq - NA
190hp/170tq @ 6psi
LD9 for Life
where do i get the cruise control bracket from a pre 99 cavy from a junk yard or from a Gm dealer
you can get one from either place. Just depends on how much you want to pay for it. I'm pretty sure it's cheap
what actuall wires did you use on your set up?
that looks nice. but honestly with that tiny filter straight on the TB i think u might of lost performance. get that CAI ay sap
Working on obtainting an M-Class license... ?? Hint: 2 wheels.
Blwn LD9 wrote:Here is a pic of my new bracket
Can you explain how you did that? It looks like you used a sheet metal and bend it into place, not from a cruise control bracket...whatever that is .... I will be doing this mod sometime soon since I finally found a good set off from a 98 Cav.
GOT STUFF FOR SALE, CHECK THE CLASSIFIED
I would relocate that air filter location asap. (move the battery into the back, and get it going into the fender, or up front near the bumper. It is going to be sucking in some MIGHTY warm air in come summer time.
My Cav
I give up...
i'm buying a VW those people love trees, so they should love eachother too... "Andy"
Toronto Cavalier wrote:that looks nice. but honestly with that tiny filter straight on the TB i think u might of lost performance. get that CAI ay sap
The problem is trying to find a CAI for a cheap price. I put that on there for the time being after putting in the MSD b/c the old WAI was in the way.
Short Hand wrote:I would relocate that air filter location asap. (move the battery into the back, and get it going into the fender, or up front near the bumper. It is going to be sucking in some MIGHTY warm air in come summer time.
I will be changing this setup as soon as I find a cheap CAI. Or I might fab something up. Anyone have an links to some cheap Cold air intakes?
I've already started on my process in making my own CAI (very similar to my old custom HZR CAI set up from my previous Supercharged Cavalier) Pic below
and the battery has already been relocated in the back. On the Battery tray, it will have OIL Catch Can and Battery disconnect switch. (which is already installed) Then Ill be doing the 2.2 Coil conversion. Im not really sure where Im going to set the 2.2 Coils yet but I think it'll be very similar to CavRacing01's style. The shorter the wire is, the better. The only reason why Im doing this 2.2 Coil Conversion is, I live in Arizona where summer is very hot and I like to be able to check my plugs and not worry about my IDI housing crack apart on me. So far everyone has claimed they noticed the car is running more smoother with this set up so I figured I'd go ahead and see for myself and i can also call it a "mod" lol. Besides that, I hate the black "boots" that is used to plug on the sparkplugs. Those things are a piece of s#it. They break on me all the time.
GOT STUFF FOR SALE, CHECK THE CLASSIFIED
nice! me wants too!
jason, nice!!
Edited 1 time(s). Last edited Friday, January 30, 2009 10:17 AM
Is that the same for ecotecs. My supercharged ecotec is miss firing and I think this might do the trick.
