I love jack stands! - Page 3 - Photos & Media Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: I used to love jack stands!
Friday, March 30, 2012 8:07 AM
-MD- Enforcer wrote:


So my cobalt config I did for the brothers 09 LNF doesn't play completely nice with my 99. Notice the boost at idle.

I just need to reconfigure add/delete a few things, and I should be good to go. Cleaned the IAC, and idle straightened out. I do need a new TPS...since it seems to not read from about 15-25%, but reads everything else perfectly fine. I might / probably have a spare lying around. I may mess with it again tonight.


if you press the print screen button on your laptop you can get a higher quality photo of this




Re: I used to love jack stands!
Saturday, March 31, 2012 5:10 AM
Fully aware of that. Just was being lazy.

Also, crankps keeps acting up. Once warm it acts like it shops scouting one tooth one the trigger wheel.....




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Saturday, March 31, 2012 3:57 PM
-MD- Enforcer wrote:Fully aware of that. Just was being lazy.

Also, crankps keeps acting up. Once warm it acts like it shops scouting one tooth one the trigger wheel.....


lol i thought it wouldve made it easier my bad

Keep us updated when you fix the issues im super interested in whats going on with it



Re: I used to love jack stands!
Monday, April 02, 2012 3:52 AM
Wow phone killed that last part....it should read.
Also, crankps keeps acting up. Once it warms up it acts like it stops counting one tooth on the trigger wheel.....

I purchased a new one Friday. Haven't had time to install it, though.





Edited 1 time(s). Last edited Monday, April 02, 2012 3:53 AM

PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Monday, April 30, 2012 5:43 AM
Bad ICM now swapped with old ICM. Runs like normal again.
Passed emission check and ordered my custom plates!




I hope a LOT more to come now that its running well.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Monday, April 30, 2012 5:51 AM
so gay


Want hub spacers rear disk brackets or trailing arm bushings? Shoot me a PM.



Re: I used to love jack stands!
Monday, April 30, 2012 6:03 AM
Club Teh Jeffie wrote:so gay

Hey no axle for you...I kid I kid.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Monday, April 30, 2012 7:00 AM
Awesome news buddy.



Re: I used to love jack stands!
Monday, April 30, 2012 8:55 AM
Its only been how many years coming?



Re: I used to love jack stands!
Tuesday, May 01, 2012 6:02 AM
Awesome Mike! Congrats bud, drive it, and enjoy!



Re: I used to love jack stands!
Tuesday, May 01, 2012 7:20 AM
ohh yeaaa










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

Re: I used to love jack stands!
Tuesday, May 01, 2012 8:26 AM
Thanks everyone. Plans are to finish a few things up, and enjoy it for a little while....then rip it apart and install a lot more parts.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Thursday, May 03, 2012 6:17 AM
May be time to start the part swapping. It has been long enough lol....






PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Thursday, May 03, 2012 6:18 AM
*Like


Want hub spacers rear disk brackets or trailing arm bushings? Shoot me a PM.



Re: I used to love jack stands!
Thursday, May 03, 2012 6:25 AM
good to see this thing out and about. i guess moving got you motivated. lol






Re: I used to love jack stands!
Thursday, May 03, 2012 2:15 PM
wow i never knew this thing had clear tails and mexican door protectors LOL

remove instantly!



Come join us over on the Olds Quad 4 and Twin Cam Facebook group!
Re: I used to love jack stands!
Thursday, May 03, 2012 6:05 PM
-Z Yaaaa- wrote:wow i never knew this thing had clear tails and mexican door protectors LOL

remove instantly!


You must have forgot,when this thing was on the road last those parts were cool to have.




Re: I used to love jack stands!
Thursday, May 03, 2012 7:08 PM
The door moldings are coming off for sure. The tails...are staying. Remember I had 95-99 toyos.

I do have 95 tails with the seperate turn signals in them..........




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Friday, May 04, 2012 8:22 AM
approved






RIP JESSE GERARD.....Youll always be in my thoughts and prayers...



Re: I used to love jack stands!
Saturday, May 05, 2012 9:09 AM
I like it... pics really make me wanna get my car back on 95-99 wheels... 00+ work for now but i miss them.
Re: I used to love jack stands!
Monday, May 07, 2012 5:04 AM
Plates came in the mail Saturday. If id doesn't rain everyday this week. Maybe I'll wash and wax it.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

Re: I used to love jack stands!
Monday, May 14, 2012 5:04 AM
the wife thought the second photo was hilarious. Wideband, oil pressure, and trans temp gauges rewired and wires are hidden. Also installed the sunfire "kick" panel under the dash. I think all j-bodies should come with one.

Also, now just working on installing my boxes of parts!!!








Edited 1 time(s). Last edited Monday, May 14, 2012 5:06 AM

PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Monday, May 14, 2012 8:15 AM




12.6 @ 114.6 MPH

Re: I used to love jack stands!
Monday, May 14, 2012 10:39 AM
lol that looked like me upside down in the car this weekend ha










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: I used to love jack stands!
Monday, May 14, 2012 11:17 AM
David, you probably fit better.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search