JUICEDZ4 projects, Im back... - Page 2 - Photos & Media Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: JUICEDZ4 projects, Im back...
Thursday, March 11, 2010 4:12 PM
Wow, just wow.




Re: JUICEDZ4 projects, Im back...
Friday, March 12, 2010 6:20 PM
Thanks to the help of a guy at work I have a nice template for the 45 degree 3 to 4 elbow I need to fab for the intake inlet. Hopefully I can work some magic with the slip roll tomorrow. I may start from some 4 tubing so there is less rolling to do. Lots to come tomorrow, I hope.





Dan


YEP, my 60' times suck

247HP/267ftlbs at 13psi with built motor

Project updates and stuff: www.clubhousecustoms.com
email: dan@clubhousecustoms.com
Re: JUICEDZ4 projects, Im back...
Friday, March 12, 2010 7:35 PM
most impressive j-body build of all time?????

maybe



1989 Turbo Trans Am #82, 2007 Cobalt SS G85





Re: JUICEDZ4 projects, Im back...
Saturday, March 13, 2010 12:05 AM
look simply amazing i do love the attention to detail its always the little thing that make a world of difference great job man..



Re: JUICEDZ4 projects, Im back...
Saturday, March 13, 2010 1:11 AM
THIS! is @!#$ awesome! Amazing job dude.



Re: JUICEDZ4 projects, Im back...
Saturday, March 13, 2010 5:13 AM
Niiiice, love the intake idea










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: JUICEDZ4 projects, Im back...
Saturday, March 13, 2010 10:48 AM
i dont have time for a real update today. Check my blog here http://clubhousecustoms.com/Wordpress/

Dan


YEP, my 60' times suck

247HP/267ftlbs at 13psi with built motor

Project updates and stuff: www.clubhousecustoms.com
email: dan@clubhousecustoms.com
Re: JUICEDZ4 projects, Im back...
Saturday, March 13, 2010 12:24 PM
This, to me, is the most impressive build I've seen on JBO. Amazing work!
Re: JUICEDZ4 projects, Im back...
Saturday, March 13, 2010 2:59 PM
best build on here!!!


Watch out there nah!
Re: JUICEDZ4 projects, Im back...
Sunday, March 14, 2010 8:11 AM
this is what makes me proud to still drive a j-body








Re: JUICEDZ4 projects, Im back...
Sunday, March 14, 2010 9:05 AM
good god that's sick !!!!!! Mine next ??!!???.....i would love to remote mount the coil packs on mine..just somewhere easier...




2003 Cavalier
Stock 2.2 Liter, 5 speed
" Leave the rice to Uncle Ben's and the wings to KFC..
Go clean or go home. "



Re: JUICEDZ4 projects, Im back...
Sunday, March 14, 2010 11:47 AM
Thanks all.

just to keep things complete, here is the update from the blog with pics from yesterday:

Got the elbow done this am. Took about two hours to cut it out from a piece of 4 tubing left over from the plenum, shape it and weld it. The welds arent the greatest, but it was tough starting and stopping every 1/2 or 1.

Also the runner lenghts and position of the plenum are set (well it will need to shift to the driver side some to make room for the runners flare). I just need to cut the other three to length and flare the ends.

Monday I will get the holes cut in the flat part of the flange and also make a plate for the TB. This should really come together next week. Im sorta hoping to finish it next week.













Dan


YEP, my 60' times suck

247HP/267ftlbs at 13psi with built motor

Project updates and stuff: www.clubhousecustoms.com
email: dan@clubhousecustoms.com
Re: JUICEDZ4 projects, Im back...
Tuesday, March 16, 2010 10:43 PM
^ Ill try to answer that tomorrow, its too late.

Tonight I dimpled a new wider base plate for the plenum, created some small velocity stacks (since my jig, and I dont think any jig, would work to hold the 90 deg bends), and trimmed down the runners to make up for the stacks.

Then I tackled the plenum. I had to make a slight change in plans by rounding the basplate and trimming the sides of the plenum way up so I could fit in a filler piece that wasnt too complicated. Anyway, its pretty well set.

Thursday Ill weld the stacks to the baseplate from the inside so I can really round them off nice. Then I can basically finish assembling the whole thing.
Tonight I dimpled a new wider base plate for the plenum, created some small velocity stacks (since my jig, and I dont think any jig, would work to hold the 90 deg bends), and trimmed down the runners to make up for the stacks.

Then I tackled the plenum. I had to make a slight change in plans by rounding the basplate and trimming the sides of the plenum way up so I could fit in a filler piece that wasnt too complicated. Anyway, its pretty well set.

Thursday Ill weld the stacks to the baseplate from the inside so I can really round them off nice. Then I can basically finish assembling the whole thing.













Dan


YEP, my 60' times suck

247HP/267ftlbs at 13psi with built motor

Project updates and stuff: www.clubhousecustoms.com
email: dan@clubhousecustoms.com
Re: JUICEDZ4 projects, Im back...
Thursday, March 18, 2010 8:12 PM
Most badass J project ever. Was wondering what ever happened to this car, but good to see some serious progress going on.

Also on the arp studs, I just ran into the same issue, I think I found some studs that will work (with my hub) http://www.summitracing.com/parts/ARP-100-7715/

I already pressed in the non arp version of this stud and looks promising, just these are double the price.



Re: JUICEDZ4 projects, Im back...
Thursday, March 18, 2010 10:53 PM
Got alot accomlished tonight.

-small stacks welded to the runners

-three runners tacked in place and one fully welded

-runners fully welded to the plenum flange

I snapped a quick pick with the plenum sitting in place. weeee









Dan


YEP, my 60' times suck

247HP/267ftlbs at 13psi with built motor

Project updates and stuff: www.clubhousecustoms.com
email: dan@clubhousecustoms.com
Re: JUICEDZ4 projects, Im back...
Thursday, March 18, 2010 11:04 PM
Rodimus Prime wrote:

most impressive j-body build of all time?????

maybe
i second that.... this car is insane!



ʇı ɹǝʍo7 | ǝcoMonstǝrs

Re: JUICEDZ4 projects, Im back...
Friday, March 19, 2010 5:59 AM
Nice work Dan!!




Jason
99 Z24 Supercharged
157hp/171tq - NA
190hp/170tq @ 6psi

LG0/LD9 for Life
Re: JUICEDZ4 projects, Im back...
Monday, March 22, 2010 10:44 PM
Good bit of progress tonight:

-welded around the outside of each runner inlet flare for strenght and so they looked a little nicer

-started porting the runner inlets, one is completely done, two roughed in

-welded two more runners fully to the head flange

-welded around the INSIDE of the three finished runners so they can be ported nicely

-ported one runner at the head flange













Dan


YEP, my 60' times suck

247HP/267ftlbs at 13psi with built motor

Project updates and stuff: www.clubhousecustoms.com
email: dan@clubhousecustoms.com
Re: JUICEDZ4 projects, Im back...
Monday, March 22, 2010 10:45 PM
The shortened plug wires came back from Magnecor friday. Took a few pics of them with the intake in place. Im hoping to finish welding it up tomorrow nite







Dan


YEP, my 60' times suck

247HP/267ftlbs at 13psi with built motor

Project updates and stuff: www.clubhousecustoms.com
email: dan@clubhousecustoms.com
Re: JUICEDZ4 projects, Im back...
Friday, March 26, 2010 2:52 PM
updates por favor?






Re: JUICEDZ4 projects, Im back...
Friday, March 26, 2010 3:48 PM
Got Damn!!!!










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

Re: JUICEDZ4 projects, Im back...
Friday, March 26, 2010 4:05 PM
GORGEOUS!!!

But please please please tell me your gonan grind down those welds a bit?



Re: JUICEDZ4 projects, Im back...
Friday, March 26, 2010 4:13 PM
I finally got more gas for the welder today. Im hoping to get the last runner welded up and the plenum on later tonight. So I should have an update tomorrow.

And I am absolutely NOT grinding any external welds. Only those inside where they would hurt flow. There is just no reason to grind them.

Dan


YEP, my 60' times suck

247HP/267ftlbs at 13psi with built motor

Project updates and stuff: www.clubhousecustoms.com
email: dan@clubhousecustoms.com
Re: JUICEDZ4 projects, Im back...
Friday, March 26, 2010 4:14 PM
that settles it then. beautiful work, and in this case its function over form....i love it...



Re: JUICEDZ4 projects, Im back...
Friday, March 26, 2010 9:31 PM
Quote:

that settles it then. beautiful work, and in this case its function over form....i love it...

No, in this case his function is such a beautiful form...






Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search