Also, did it only take 3 cans to do all 4 wheels?
Shoulda messed with some of the BLAZE colors of the dip. Always wanted to see Blaze Yellow or Orange on a silver car.
YES to the whites!
Supercharged 2002 Chevrolet Cavalier Z24
not a big fan loved the gold/bronze rims better.. whyd you get rid of them?
GOT ECOTEC?
Thanks for the love everyone! I prefer this "meaty stance" the car has with my Trak Lites. I was just sick of the gloss black but now the Traks are staying on! RACECAR!
newt wrote:Also, did it only take 3 cans to do all 4 wheels?
Roughly 3.5 cans total. About 5-6 coats for my color change.
Dave (2 UNIQ) wrote:not a big fan loved the gold/bronze rims better.. whyd you get rid of them?
I did not get rid of them. They simply made the jump to my daily driver after I lowered it... Dual bolt pattern means they fit my CRV and they fit perfect with no spacers. Couldn't ask for a better setup!
WMHM weekend by
qwik2k2z24, on Flickr
Lowered crv by
qwik2k2z24, on Flickr
BeardLife /
Club Awesome Reject Blog
I'm not digging the white on the silver, but still love the car!
Now give us some motor building pictures!!
FU Tuning
This will always be my favorite for your car
Like the CRV just based on originality. Cav is good too but I've never run across a CRV like that.
Addicted to meth wrote:I'm not digging the white on the silver, but still love the car!
Now give us some motor building pictures!!
I was thinking the same thing but the white on silver looks pretty dope in person.
- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.
As Jeremy posted above.. We attended the local Cars and Coffee meet here in Michigan. Special appearance by Black Jason.
Cars and coffee August. by
qwik2k2z24, on Flickr
Cars and coffee August. by
qwik2k2z24, on Flickr
Cars and coffee August. by
qwik2k2z24, on Flickr
Cars and coffee August. by
qwik2k2z24, on Flickr
Cars and coffee August. by
qwik2k2z24, on Flickr
Cars and coffee August. by
qwik2k2z24, on Flickr
Installed my Schroth harness later that day.
Harness by
qwik2k2z24, on Flickr
Then retired my Nardi from duty with Cavnasty. It just so happens my father's 1993 Malibu Sunsetter boat uses a nardi 6 bolt hub... This damn thing is minty!
Boat nardi by
qwik2k2z24, on Flickr
Boat nardi by
qwik2k2z24, on Flickr
Boat nardi by
qwik2k2z24, on Flickr
Malibu by
qwik2k2z24, on Flickr
BeardLife /
Club Awesome Reject Blog
Hey op I noticed your running camber plates. I have the rksport prostreet full coilover setup and I want to get those camber plates that overkill makes. I was wondering what is needed to make camber plates work with my setup because obviously the spring can't just sit on the metal camber plate mount. So what are you to use to transition the spring to the solid camber mount? I tried e mailing the guy at overkill with no response. The only reason I need these mounts is so I can get my caster into spec.
What is the bolt pattern on the boat trailer.....
- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.
Id love you long time if you could measure the bolt pattern on the Nardi wheel.
Ive got a random hub from my friends Prelude but I have no idea what kind of wheels will fit on it.
Brian wrote:Id love you long time if you could measure the bolt pattern on the Nardi wheel.
Ive got a random hub from my friends Prelude but I have no idea what kind of wheels will fit on it.
Quickest way to check is the position of the holes. Nardi runs it clocked with two of the six holes horizontal at the top. MOMO/sparco have theirs clocked so there is a single hole at the top and bottom.
I believe these are the only two 6 bolt patterns out there.
BeardLife /
Club Awesome Reject Blog
Sweet. I'll check that out when I get home. I'm really wanting to run a Nardi in my Accord.
Thanks Jay.
Sup with the camber mounts? ^
Ahh I see! Thanks where do you get the adapter comes? From overkill?
jdm cav9 wrote:Ahh I see! Thanks where do you get the adapter comes? From overkill?
The one in the picture is made by overkill. Not sure where else to find such a piece.
BeardLife /
Club Awesome Reject Blog
Qwik2k2z24 wrote:jdm cav9 wrote:Ahh I see! Thanks where do you get the adapter comes? From overkill?
The one in the picture is made by overkill. Not sure where else to find such a piece.
Correction only place you can get that now is Driving Force Fabrication
DRIVING FORCE FABRICATIONS (908)866-1882
I like that you can see the wheel detail in white...
Love you long time.
I applaud you trying different things, one of the reasons the Sunfire sits is my lack of willingness to change it. It needs it, I have ideas, but I just cant do it... Your just jumping in and saying eff it.
** FOR SALE**
http://www.j-body.org/forums/read.php?f=24&i=110879&t=110879
That whore of a plate. I need to buy one.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO