2003 4drs4morewhores 2013 build - Page 3 - Photos & Media Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: 2003 4drs4morewhores 2013 build
Thursday, July 04, 2013 7:16 PM
Wiggled the dipstick tube out it was pretty rusted in there. Trying to figure out if i have to buy a fuel line tool to disconnect my lines and how fuel rail its self unscrews from the line. Going to polish the rail. Also going to remove the battery tray and hopefully soon start tucking my wires. Toyos look good but need a little lovin, a buddy is going to re clear them. Bought a brand new K04 off a buddy for a good deal and was kinda swayed towards the lnf setup, if anyone hears about any lnf hard parts (manifold, cooling lines, oil lines, banjo bolts) please give me a shout.
P.s the lnf swap in classifieds is "sold" i tried haha
Sedan ftw

Re: 2003 4drs4morewhores 2013 build
Thursday, July 04, 2013 7:51 PM
Contact Mongorat off Css.net. He has all the parts youd need
Re: 2003 4drs4morewhores 2013 build
Thursday, July 04, 2013 9:17 PM
James Barclay wrote:Thanks kevin! Nice hood whered you get that ?


From the RSM Racing Trailer @ the 2004 J-Body BASH.

They have since gone out of business, but I got a smokin hot deal on it & NO SHIPPING!

It is made by JSP, superb quality.





Supercharged 2002 Chevrolet Cavalier Z24
Re: 2003 4drs4morewhores 2013 build
Friday, July 05, 2013 4:20 AM
Philly D wrote:Contact Mongorat off Css.net. He has all the parts youd need


Thanks alot philly will do !!
Re: 2003 4drs4morewhores 2013 build
Friday, July 05, 2013 1:04 PM
I res
Nodes to your email but never got any questions! Let me know what ya got, either here or in a pm
Re: 2003 4drs4morewhores 2013 build
Sunday, July 14, 2013 8:59 PM
So ive done more research on the build im starting and like the le5 HO manifold, stopped by my local scrap yard and found a fairly clean 06 2.4 vvt cobalt. Grabbed the manifold for $25 cash, also grabbed a dimmer switch/ fog light switch i needed because my car is a base model sedan with out fogs, yet im wiring fogs for my 02 front end. Aswell as a couple good oil filter caps cuz mine was chewed up. The runner size difference is drastic between the two manifolds, also feel more comfortable boosting a solid 1 piece manifold ober a 2 or 3 piece thats glued together. Ive ordered the adapter/ gasket to make my 2.2 cable throttle body work on the larger 2.4 manifold from CED. When i bought the car i checked the floors to make sure they were solid, they are but notices the the carpet was damp. I left it till now and felt it again and it was still damp so i ripped it out, no rust so im happy/ glad i got it done finally. Will get a new one after major motor internals are ordered, intake and exhaust/ turbo goodies really lighting a fire under my ass to buildthis thing so i can beat it . Still just tinkering with my interiour untill my lsd, short shift, saab fender markers, LNF exhaust manifold, LNF thermostat housing and coolant cross pipe, all turbo oil and colant lines and banjo bolts, and tein ss-p arrive. Random parts but some stuff was good deals and some stuff was just wanted hah. Alright time for pics!








Re: 2003 4drs4morewhores 2013 build
Monday, July 15, 2013 5:19 AM
Philly D wrote:Contact Mongorat off Css.net. He has all the parts youd need


Thanks alot Philly D for pointing me in the right direction!! Very much appreciated ! If anyone else is looking to boost there car either lnf/ lsj swap stuff check out Mongorat on css.net!
Re: 2003 4drs4morewhores 2013 build
Monday, July 15, 2013 7:41 PM



TEAMGreen LSD. Amazing product.
Re: 2003 4drs4morewhores 2013 build
Thursday, July 18, 2013 7:42 AM



Removing axels, control arms and knuckles. Getting ready to drop motor, trans, and subframe all in one.
Re: 2003 4drs4morewhores 2013 build
Thursday, July 18, 2013 7:07 PM






Finally out. Tear down is tomorrow to see what im dealing with. New saab 9000 fender markers . Will be metal cast orange with corner lights
Re: 2003 4drs4morewhores 2013 build
Wednesday, July 24, 2013 10:21 PM









Cylinders are mint no shrapnel, pistons have some valve slap, intake valves bent and touched each other. Got the adapter/ gasket for the 2.4 manifold to the 2.2 throttle body from crate engine depot, aswell as the rest of the needed hard parts for the lnf turbo swap other than charge piping and an intercooler. Got excited and could wait to see what it will look like when finished. Motivated huge just from tossing it together quick for pics. Need opinions please im at the point in my build where im going to be ordering internals soon. Cylinders are mint but should i get it stroked to 86.5mm for a fresh start ? Does the .5 make a difference as far as the integrity/strength of the cylinder walls ? Thanks guys !

Re: 2003 4drs4morewhores 2013 build
Wednesday, October 01, 2014 10:13 AM

Re: 2003 4drs4morewhores 2013/2014 build
Wednesday, October 01, 2014 10:15 AM
More motor and build updates coming been busy lately
Re: 2003 4drs4morewhores 2013/2014 build
Wednesday, October 01, 2014 10:30 AM








New 0 miles L61 motor i picked up in pittsburgh, some in car mock up with old motor and k04 lnf turbo swap parts. New dash for gauges, aswell as Tein edfc in car dampening adjust with everything needed! Such nice stuff Tein makes! More to uploads to come later
Re: 2003 4drs4morewhores 2013/2014 build
Wednesday, October 01, 2014 10:36 AM

Re: 2003 4drs4morewhores 2013/2014 build
Wednesday, October 01, 2014 10:44 AM



Arp headstuds and forged eagle h rods. Getting ready for boost!
Re: 2003 4drs4morewhores 2013/2014 build
Wednesday, October 01, 2014 12:22 PM

Re: 2003 4drs4morewhores 2013/2014 build
Wednesday, October 01, 2014 12:28 PM


Sorry about the single picture posts the org. Keeps logging me out everytime, @!#$tin the bed. Supertech 75lb dual valve springs, titanium retainers, intake and exhaust valves
Re: 2003 4drs4morewhores 2013/2014 build
Wednesday, October 01, 2014 12:43 PM



Supertech bronze valve guides and viton seals, level zero motorsports balance shaft delete, i also have arp flywheel bolts and a fresh unused l61 crank.
Re: 2003 4drs4morewhores 2013/2014 build
Wednesday, October 01, 2014 12:58 PM



Brand new fenders and turbo tech poly trans mounts. Also the old bbs i had and sold.
Re: 2003 4drs4morewhores 2013/2014 build
Wednesday, October 01, 2014 1:25 PM


Re: 2003 4drs4morewhores 2013/2014 build
Wednesday, October 01, 2014 5:05 PM
Nice update!

Can't wait to see it finished.



Re: 2003 4drs4morewhores 2013/2014 build
Wednesday, October 01, 2014 6:18 PM
strat81 wrote:Nice update!

Can't wait to see it finished.


Thanks man! More updates to add when i can get the org to cooperate. Soo close to being able to actually build this motor!
Re: 2003 4drs4morewhores 2013/2014 build
Wednesday, October 01, 2014 6:23 PM




aluminum grand am control arms, poly urathane control arm bushings, addco front and rear sway bars, she gon hook good
Re: 2003 4drs4morewhores 2013/2014 build
Wednesday, October 01, 2014 6:25 PM
Also neon rear rotors, drilled and slotted for my saturn/srt-4 rear disk brake swap
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search