Rob Dotterer wrote:If your doing a NWF brake swap, you can swap to 2000+ bonneville aluminum spindles, bonneville aluminum ball joints, 2010 camaro ss/ CTSV/ z06 4 piston calipers, and 2010 mustang gt500 15in ceramic brake rotors. Just an Idea.
Yeah I've heard of that combination potentially working well together. But I'm gonna go with a different route mainly to clear my wheels I already have, and low weight. I'm gonna go with Grand Am/Alero aluminum arms, Mr. Quick spindles, Celica GT rotors, and Grand Am GT calipers/brackets. It will be the lightest weight combination I can come up with, while maintaining easy parts availability and will clear my rims I already have.
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
Mike clear stock 95-99 Z24 rims?
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Yup. That's what I am running with. Unless I can find an awesome deal on some ultra lightweight 17's or so that I like, I am gonna stick with these.
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
In for more info once you get it together!
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Hmmm....... these showed up at my front door for some reason!!!
Also have the Eibach front swaybar and some sticky rubber that will be going on next week... more pix to come.
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
THOSE ARE BADASS!!!
i want the dr 44's but im not too sure on gold
how you think they look on a white sedan??? 03-05
Bout damn time you get some rims for that thing lol
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
WHITECAVY wrote:Bout damn time you get some rims for that thing lol
Eff U David!!!!! Wanna buy my Z wheels? Lol
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
lol, your Z wheels wouldnt fit over my brakes
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
It does, looks good with that blue
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
not bad....not bad at all
RIP JESSE GERARD.....Youll always be in my thoughts and prayers...
Yeah, looks great
2004 Cavalier Sedan
Sweet. Are you going with the n body bolt pattern up front then?
JUCNBST wrote:Sweet. Are you going with the n body bolt pattern up front then?
Yeah. I dont have the patience to wait for the Mr. Quick spindles right now. Plus the N-Body cv's are stronger than the stock N
J ones. There will be a couple other things i will be doing that if they work out should make a huge difference in handling and overall drivability.
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
Cool, looking forward to progress.
Making my hybrid axles right now. Doing something a bit different from the norm. Any guesses as to what's going on???
Stock J passenger axle
Partial N body axle
Getting everything cleaned up!
J axle shaft ready for the N body CV.
Comparison of stock J outer CV to the larger splined N body CV
Hybrid axle is complete!!!
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
Sweet man!
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Keep it coming....it's keeping me motivated to work on the ln2 car.
Did you modify your own jackshaft? If so, im sending you mine lol. I need the bearing changed.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
hmmm.... did you put all those teeny needle bearings back into the cv joint? i accidentally tore my axle apart at the joint on my 5spd because it simply would not come out of my isuzu. took everything down to the trans shop for them to put the axle back together (it was a very low mileage unit i had bought brand new and wanted it back lol) and he looked at me like um no that cannot be put back together because i didnt have all those round needle bearings apparently. so thats why i ask....
as far as the rims go, i like them, but IMO to pull that design off properly the car needs to be much lower and the rim size needs to be at least 18" but i get why u didnt go large on them, weight is a mofo!
gettin there man. love the nice clean brakes. love how clean the car is. now do something about that exhaust.
It's nice to be injected but I love being blown.