Bought a new project ;) - Photos & Media Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Bought a new project ;)
Tuesday, January 17, 2017 4:56 PM
Couldn't pass up the deal on another cavy




Pic of what it looks like all together

Stripped all the tan interior and 97 wiring harness out

Replaced with graphite interior and an 01 harness

Pulling engine due to knock



Removed izuzu trans mount in preparation for the getrag mount to be welded in



Re: Bought a new project ;)
Wednesday, January 18, 2017 5:58 AM
So what's going into this car?



Re: Bought a new project ;)
Wednesday, January 18, 2017 6:16 AM
Putting a 2.4 ld9 back in
Specs:
Ported cylinder head
Stainless valves
Bronze valve guides
2.3 HO valve springs
2.3 HO exhaust cam
"Secret Cam" intake cam
2.3 oil pump swap
Miller performance 2.3 pump swap pan
Forged rods and Pistons
ARP Studs
Eaton M45 supercharger - 2.5" pulley
7in crank pulley
Lsj injectors
Iperformance 4-2-1 header
All poly mounts
Re: Bought a new project ;)
Wednesday, January 18, 2017 11:24 AM
Very nice, should be fun.



Re: Bought a new project ;)
Thursday, March 02, 2017 8:40 AM
Nice score!
Re: Bought a new project ;)
Friday, March 24, 2017 5:07 AM
Any updates kind sir!





Re: Bought a new project ;)
Tuesday, April 04, 2017 12:18 PM
I know there's updates. We need pics on here



Re: Bought a new project ;)
Thursday, April 06, 2017 7:11 PM
Here's some updates
Sanded and resprayed the bay
Cleaned and painted subframe and steering rack
All powdercoated parts are back 😍
Traded Strat the wilwoods for his baers










Re: Bought a new project ;)
Friday, April 07, 2017 4:20 AM
Looking good man. I'm thinking about spraying my bay this summer as well.




Re: Bought a new project ;)
Tuesday, April 11, 2017 5:35 PM
Put some more parts on last night

Installed the fuel tank
Put the OEM tie bar back on
Put the TTR Upper mount back together ( had it powdercoated)
Put master cylinder and non-abs distribustion block on
Struts and strut bar are in


Re: Bought a new project ;)
Thursday, April 13, 2017 6:53 AM
Just curious what your reasons are for going m45 instead of turbo? Not knocking the decision, just interested in why.



"In Oldskool we trust"

Re: Bought a new project ;)
Thursday, April 13, 2017 6:53 AM
Oh and great work so far!



"In Oldskool we trust"
Re: Bought a new project ;)
Thursday, April 13, 2017 8:57 AM
I've had an m45 setup laying out so no extra cost Lolol will probally go turbo at some point
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search