02 Cavalier Brake fluid wont come from bleeder screws HELP! - Newbies Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
02 Cavalier Brake fluid wont come from bleeder screws HELP!
Sunday, November 13, 2011 9:20 PM
I have a 02 cavalier and i have an issue with the brakes. I cant seem to get fluid out of the master cylinder into the brake lines. No fluid comes out of the bleeder screws and the fluid level dosent even drop at all. I have replaced the master cylinder thinking it was bad and still have the problem. I dont see any visible kinks or bends in the brake lines either. When i press the brake pedal it goes in about 2/3rds of the way normal and then it feels as if the rest of the way there is no restriction like theres something broke. Also if i press the brake in all the way to the floor and hold it for a sec or 2 the car cuts off???? vaccuum issue?? Idk wats going on but this is really getting on my nerves i cant seem to find out the problem.

IF anyone has any ideas please help me out im in a bind. Thanks

Re: 02 Cavalier Brake fluid wont come from bleeder screws HELP!
Tuesday, November 15, 2011 5:23 PM
No leaks? Maybe a line is clogged somewhere. As for the car cutting off id say a vaccuum leak. Have you listened for a leak and checked all your lines?
Re: 02 Cavalier Brake fluid wont come from bleeder screws HELP!
Tuesday, November 15, 2011 8:53 PM
Does it Have ABS?
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search