I have to drag race Saturday and i need to know what you guys run azenis at the drag strip
yeah i am not good at drag racing but i said i will do it
Import v.s. domestic at Milan drag-way
see ya!
I think I ran my azenis around 25 psi. It doesn't really matter, since the sidewall is so stiff. I think if you lower them too much your going to have some cupping issues.
20-22 psi is where I have the best luck.
Ran the 12.9 with a 2.0 60ft on 22 psi.
Later,
Jeff
--------------------------------
2000 Turbocharged Silver Z24 5spd
Cardomain Site
sweet! i hope i can pull off a 2.0 60ft
see ya!
I ran mine super low. like 16-18 psi. Still pulled off 2.1 60' in a stock fire.
For me I reved it to about 3500 rpms. Then dropped the clutch.
My Car
I used to run mine at 24-26 psi and pulled low 2.1's often.
<img src=http://ourworld.cs.com/jwithspray/Nitrosig13303.JPG>
nitro do you spray off the line? or do you wait?
my 17's are 40 psi for everyday, 32 psi for track, is this still too high ?
15.958 @ 88.201 stock, still getting @!#$ty launches...
On the Azenis's at 26 psi, I could spray in first after it hooked with the 75 shot, but with the 100 shot, they just went up in smoke again. Keep in mind I aldo have a window switch.
<img src=http://ourworld.cs.com/jwithspray/Nitrosig13303.JPG>
